This document provides information about modules 4 and 5 for an electrical installations and management course. It lists the sections to complete for each module, which include pre-tests, activities, and post-tests. It also provides tips for storing electrical power tools, such as placing heavy tools on lower shelves and defective tools in a separate section. Finally, it lists assignments for the course, such as watching a video on tools, drawing 5 tools with their functions, and submitting details on 1 tool.

1. ELECTRICAL INSTALLATIONS AND
MANAGEMENT

2. WHAT TO ANSWER
ON MODULE 4?
1. PRE-TEST
2. ACTIVITY 1
3. ACTIVITY 2
4. CHECK YOUR UNDERSTANDING
5. POST-TEST

4. WHAT TO ANSWER
ON MODULE 5?
1. PRE-TEST
2. LOOKING BACK TO YOUR LESSON
3. ACTIVITY
4. CHECK YOUR UNDERSTANDING
5. POST-TEST

5. Basic tips in storing electrical power and
hydraulic tools
-Commonly used electrical power and
hydraulic tools should be placed at the
center shelves of the cabinet.
-Heavy tools like power grinder should be
placed at the lowest shelf.
-Light tools should be placed at the upper
shelf.
-Electrical power and hydraulic tools must be
stored according to their classification.
-Defective tools shall be kept in section
intended for them for inventory purposes.

7. 1. VIDEO PRESENTATION OF DIFFERENT TOOLS IN EIM
96-98
2. DRAW 5 TOOLS USED IN EIM AND WRITE IT’S
FUNCTION OR USES
90-91
3. SUBMIT 1 TOOL
92-95