nexus+line+cards.pdf
•
0 likes•6 views
The document discusses different line cards available for Cisco Nexus 7000 switches. It describes the M-series and F-series line cards, their features, and comparison charts. The latest F3 line cards provide all the same capabilities as the M-series cards. It also touches on selecting the right Nexus device based on requirements and components like chassis, line cards, supervisor modules, fabric modules, NX-OS version, and licenses.
Report
Share
Report
Share
Download to read offline
Recommended
Cisco NM1FE2W
This document provides information about a Cisco NM1FE2W network module, including:
- It is a 1 port 10/100 Ethernet network module for the Cisco 3600 series routers.
- It can be purchased from Launch 3 Telecom who provides Cisco equipment, repairs, and related services.
- Launch 3 Telecom offers same day shipping for orders placed before 3PM and provides tracking information.
cisco-nim-2fxs-datasheet.pdf
The NIM-2FXS datsheet summarizes a 2-port network interface module that supports FXS, FXS-E and DID ports and is compatible with Cisco 4000 series integrated services routers. It has 2 ports, supports Cisco IOS XE3.13.4 and above, and weighs 0.42 lbs. The document provides specifications, installation details, supported devices, comparison to similar modules, and contact information.
Mitsubishi plc fxfamilycatalogverf-160517025323 dienhathe.vn
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Cisco router configuration
This document provides an overview of Cisco router configuration and components. It describes Cisco router models such as the 2500, 4000, 7000 and 7500 series. It also describes various interface cards that can be used with different router models, including Fast Serial, Ethernet, Fast Ethernet, ATM, FDDI, HSSI, Channelized T3, and POS interface cards. Finally, it outlines the steps for initial router configuration, including determining the physical layout, connecting to the console port, accessing privileged modes, and saving configuration changes.
cisco-nim-2fxs&4fxo-datasheet.pdf
The document is a datasheet for the NIM-2FXS/4FXO network interface module from Hi-Network. It has 6 ports, with 2 FXS/FXS-E/DID ports and 4 FXO ports. It is supported on Cisco 4000 Series Integrated Services Routers and has an IOS version of XE3.14.3 or higher. It provides information on specifications, features, accessories, supported devices, and contact details for Hi-Network.
Cisco 1921 vs. cisco 1941 vs. cisco 2901
The document compares the Cisco 1921, 1941, and 2901 routers. The Cisco 1941 and 2901 have more features than the 1921, such as additional WAN ports, interface slots, service module slots, USB ports, flash/RAM memory, LAN switchports, and support for voice/video capabilities. The 2901 has the most advanced features, including support for up to 35 digital voice ports and 100 Cisco Unity mailboxes.
9726 dsi protocol_stacks_ds_old
This document summarizes Dialogic's Distributed Signaling Interface (DSI) protocol stacks, which support Signaling System 7 (SS7) and IETF SIGTRAN specifications. The DSI SS7 stack supports protocols like MTP, ISUP, SCCP, TCAP, MAP, INAP, and CAP. The DSI SIGTRAN stack supports protocols like SCTP, M2PA, M3UA, and SUA to transport SS7 over IP networks. The stacks support standards from ANSI, ETSI, ITU, IETF and country-specific variations. Features include APIs for message content, common SS7/SIGTRAN API, distributed execution, and support for Solaris, Linux
Fx3 3 g 3u
The document introduces Mitsubishi Electric's FX 3 series as the third generation of compact PLCs, noting their ease of use, flexibility, and affordability. It provides details on the FX3G, FX3U, and FX3UC models and their specifications, functionality for communication, networking, analog control, and positioning. Environmental specifications are also listed.
Recommended
Cisco NM1FE2W
This document provides information about a Cisco NM1FE2W network module, including:
- It is a 1 port 10/100 Ethernet network module for the Cisco 3600 series routers.
- It can be purchased from Launch 3 Telecom who provides Cisco equipment, repairs, and related services.
- Launch 3 Telecom offers same day shipping for orders placed before 3PM and provides tracking information.
cisco-nim-2fxs-datasheet.pdf
The NIM-2FXS datsheet summarizes a 2-port network interface module that supports FXS, FXS-E and DID ports and is compatible with Cisco 4000 series integrated services routers. It has 2 ports, supports Cisco IOS XE3.13.4 and above, and weighs 0.42 lbs. The document provides specifications, installation details, supported devices, comparison to similar modules, and contact information.
Mitsubishi plc fxfamilycatalogverf-160517025323 dienhathe.vn
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Cisco router configuration
This document provides an overview of Cisco router configuration and components. It describes Cisco router models such as the 2500, 4000, 7000 and 7500 series. It also describes various interface cards that can be used with different router models, including Fast Serial, Ethernet, Fast Ethernet, ATM, FDDI, HSSI, Channelized T3, and POS interface cards. Finally, it outlines the steps for initial router configuration, including determining the physical layout, connecting to the console port, accessing privileged modes, and saving configuration changes.
cisco-nim-2fxs&4fxo-datasheet.pdf
The document is a datasheet for the NIM-2FXS/4FXO network interface module from Hi-Network. It has 6 ports, with 2 FXS/FXS-E/DID ports and 4 FXO ports. It is supported on Cisco 4000 Series Integrated Services Routers and has an IOS version of XE3.14.3 or higher. It provides information on specifications, features, accessories, supported devices, and contact details for Hi-Network.
Cisco 1921 vs. cisco 1941 vs. cisco 2901
The document compares the Cisco 1921, 1941, and 2901 routers. The Cisco 1941 and 2901 have more features than the 1921, such as additional WAN ports, interface slots, service module slots, USB ports, flash/RAM memory, LAN switchports, and support for voice/video capabilities. The 2901 has the most advanced features, including support for up to 35 digital voice ports and 100 Cisco Unity mailboxes.
9726 dsi protocol_stacks_ds_old
This document summarizes Dialogic's Distributed Signaling Interface (DSI) protocol stacks, which support Signaling System 7 (SS7) and IETF SIGTRAN specifications. The DSI SS7 stack supports protocols like MTP, ISUP, SCCP, TCAP, MAP, INAP, and CAP. The DSI SIGTRAN stack supports protocols like SCTP, M2PA, M3UA, and SUA to transport SS7 over IP networks. The stacks support standards from ANSI, ETSI, ITU, IETF and country-specific variations. Features include APIs for message content, common SS7/SIGTRAN API, distributed execution, and support for Solaris, Linux
Fx3 3 g 3u
The document introduces Mitsubishi Electric's FX 3 series as the third generation of compact PLCs, noting their ease of use, flexibility, and affordability. It provides details on the FX3G, FX3U, and FX3UC models and their specifications, functionality for communication, networking, analog control, and positioning. Environmental specifications are also listed.
Cisco Catalyst 2960-X Datasheet
The Cisco Catalyst 2960-X Series are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access and networking capabilities for campus and branch applications. They support various software-defined capabilities and feature sets including LAN Lite, LAN Base, and IP Lite. The switches are available in several models that vary in port configuration, uplink interfaces, power supply, and other hardware specs depending on the intended use and deployment.
JVL Multi-Axis High-Speed RS485 Expansion Modules for MAC Motor
The document describes new expansion modules, the MAC00-FS1 and MAC00-FS4, for JVL's integrated MAC motors. The expansion modules allow multi-axis, high-speed control of up to 255 motors over an RS485 bus. They provide fast local scanning of motor position and status values, as well as sending new position data to multiple motors quickly. The modules also enable reading and writing of all motor parameters and using group commands to control several motors simultaneously.
Cisco XFP10GEROC192IR
This document provides information about the Cisco XFP10GEROC192IR product, including:
- It is a 10GBASE-ER and OC192 IR2 XFP module for networking.
- Launch 3 Telecom sells this product and provides same-day shipping, payment options like credit cards, and a warranty.
- They also offer services like repairs, maintenance contracts, installation, and recycling of telecom equipment.
A review on virtex fpga family from xilinx
Confabulation and segregation about different Virtex FPGA families of XILINX is presented. Starting with the features of latest Spartan-6 FPGA followed by Spartan-3A-DSP, 3AN, 3A, 3E and Spartan-3 are correlated, contrasted accordingly and the changes over these generations are also deliberated. For every family, Introduction and ordering information, Functional description, DC and switching characteristics and Pin out descriptions are mentioned and elucidated.
Network devices ppt
The document discusses network devices and operating systems, specifically focusing on Cisco's NX-OS operating system designed for Nexus switches and MDS Fibre Channel switches. It also discusses the differences between switches and routers, as well as Cisco's Catalyst brand of switches, their operating systems (CatOS and IOS), interfaces, and models. The document concludes with a brief overview of D-Link Corporation and their position as a leading networking company.
Networking hardware
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines network interface cards in detail, describing their specifications and evolution over time from older cards to current gigabit Ethernet cards.
Networking hardware (2)
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines networking interface cards in detail, describing their specifications and evolution over time from older technologies like Token Ring and 10BaseT to current Gigabit Ethernet standards.
Networking hardware (2)
The document discusses various types of network hardware including local networking hardware like network interface cards (NICs), cables, connectors, hubs, switches, servers and workstations. It also discusses internetworking hardware like line drivers, transceivers, bridges, switches, routers and gateways. It describes the characteristics of different NICs such as their speed, connector type, and bus technology. It also examines concepts like IRQ, I/O address, base memory address, and DMA used for resource allocation on NICs. Finally, it discusses network connectors and different types of hubs.
NETWORK INTERFACE CARD
The document discusses a Network Interface Card (NIC). It begins with an introduction to NICs, noting they connect systems to networks and allow communication. It then covers the history of NICs, types of NICs based on various features, the basic functions and working of NICs, and how NICs fit into the 7-layer OSI model. Specifically, it states that NICs operate at the physical layer (layer 1) and data link layer (layer 2) of the OSI model. The document provides details on each of these layers and how NICs enable communication and data transfer between networked devices.
Network Interface Card.pdf
The document discusses network interface cards (NICs). It begins with an introduction to NICs, describing them as cards that connect systems to networks and allow communication. It then covers the history of NICs, types of NICs based on various factors, basic functions and workings of NICs, functional parts, installation and configuration, advantages and disadvantages. The document aims to provide a comprehensive overview of NICs.
Using Cisco Devices to Build Up Different Networks
The document discusses 5 solutions for building networks of varying sizes using Cisco devices:
1. A small business network with 2-20 PCs can use a Cisco router and 24-port switch for an easy and cheap configuration.
2. For harsh environments, adding an ASA firewall, Cisco router, and 48-port switch provides stronger security and stability.
3. A network with around 100 clients across multiple offices benefits from a distribution switch to improve forwarding between offices, along with fiber modules for increased speed.
4. Larger networks supporting IP phones and video need powerful firewalls, voice-enabled routers, T1 modules, and PoE switches to power phones.
5. The largest
Cisco XFP-10GLR-OC192SR
This document provides information about the Cisco XFP-10GLR-OC192SR module and how to purchase it from Launch 3 Telecom. It describes Launch 3 Telecom as a supplier of Cisco and telecom equipment, outlines the payment and shipping options for purchasing the module, and details the warranty and support services provided by Launch 3 Telecom.
cisco-qsfp-40g-sr-bd-datasheet.pdf
The document is a datasheet for the Cisco QSFP-40G-SR-BD 40GbE transceiver module. It provides specifications for the module such as dimensions, wavelength range, cable distance support up to 150m on OM4 fiber, power consumption of 3.5W, and temperature operating ranges. The module supports 40GbE connections on duplex multi-mode fiber and complies with various IEEE and QSFP standards. It can be used to provide high-speed 40GbE connectivity for data center and enterprise network applications.
xc_sp2e45
The document introduces two new Spartan-IIE FPGA devices, the XC2S400E and XC2S600E, that address the need for low-cost, high-density, high I/O solutions. The new devices provide up to 514 I/Os, over double the distributed RAM of previous devices, and support for multiple I/O standards. They allow targeting a wider range of designs than previously possible at lower costs per I/O.
BRKARC-2881.pdf
Kureli Sankar will be giving a presentation on the Cisco ISR1000 and ISR1100 series routers. The presentation will include an overview of the hardware, features, technologies, use cases, a demo, performance and scale information, and questions and answers. It will also direct attendees to additional resources on the routers.
Data sheet c78-707001
The document describes the Cisco Nexus 3548x and 3524x switches, which are 1RU 10GbE switches that provide line-rate Layer 2 and 3 switching with ultra-low latency of less than 200 nanoseconds. They utilize Cisco's Algorithm Boost technology for innovations in latency, forwarding, and performance visibility capabilities such as three configurable modes for low latency including warp mode that lowers latency by up to 20%. The switches run the Cisco NX-OS operating system.
Cisco 3900 series router datasheet
Cisco 3900 Series Router Datasheet - Learn product details such as features and benefits, as well as hardware and software specifications.
Lika Electronic December 2016 Newsletter in English
Lika Electronic December 2016 Newsletter - Featured this month - New fieldbus versions to grow the E- series encoder offer. A new generation of CANopen, Profibus and DeviceNet encoders is now available from Lika Electronic to complement its popular E- series range.
Cisco WS-C4908GL3
The document describes the Cisco Catalyst 4908G Ethernet switch. It provides details on how to purchase the switch from Launch 3 Telecom, including payment and shipping options. It also provides information on the warranty and additional services offered by Launch 3 Telecom, such as repair, maintenance contracts, and installation services for the Cisco switch.
PICK N MX FLYER
The document discusses Juniper Networks' MX platform as a solution for broadband network gateways, highlighting its capabilities for supporting high subscriber volumes and bandwidth demands. It notes that the MX5 to MX960 platforms can terminate subscribers using modular interface cards or port concentrators. A subscriber management license is required and comes in tiers from 4,000 to 128,000 subscribers with a pay-as-you-grow model. The MX platform also supports features beyond subscriber management and has advantages of Juniper's experience in broadband markets and separation of control and forwarding planes.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.More Related Content
Similar to nexus+line+cards.pdf
Cisco Catalyst 2960-X Datasheet
The Cisco Catalyst 2960-X Series are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access and networking capabilities for campus and branch applications. They support various software-defined capabilities and feature sets including LAN Lite, LAN Base, and IP Lite. The switches are available in several models that vary in port configuration, uplink interfaces, power supply, and other hardware specs depending on the intended use and deployment.
JVL Multi-Axis High-Speed RS485 Expansion Modules for MAC Motor
The document describes new expansion modules, the MAC00-FS1 and MAC00-FS4, for JVL's integrated MAC motors. The expansion modules allow multi-axis, high-speed control of up to 255 motors over an RS485 bus. They provide fast local scanning of motor position and status values, as well as sending new position data to multiple motors quickly. The modules also enable reading and writing of all motor parameters and using group commands to control several motors simultaneously.
Cisco XFP10GEROC192IR
This document provides information about the Cisco XFP10GEROC192IR product, including:
- It is a 10GBASE-ER and OC192 IR2 XFP module for networking.
- Launch 3 Telecom sells this product and provides same-day shipping, payment options like credit cards, and a warranty.
- They also offer services like repairs, maintenance contracts, installation, and recycling of telecom equipment.
A review on virtex fpga family from xilinx
Confabulation and segregation about different Virtex FPGA families of XILINX is presented. Starting with the features of latest Spartan-6 FPGA followed by Spartan-3A-DSP, 3AN, 3A, 3E and Spartan-3 are correlated, contrasted accordingly and the changes over these generations are also deliberated. For every family, Introduction and ordering information, Functional description, DC and switching characteristics and Pin out descriptions are mentioned and elucidated.
Network devices ppt
The document discusses network devices and operating systems, specifically focusing on Cisco's NX-OS operating system designed for Nexus switches and MDS Fibre Channel switches. It also discusses the differences between switches and routers, as well as Cisco's Catalyst brand of switches, their operating systems (CatOS and IOS), interfaces, and models. The document concludes with a brief overview of D-Link Corporation and their position as a leading networking company.
Networking hardware
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines network interface cards in detail, describing their specifications and evolution over time from older cards to current gigabit Ethernet cards.
Networking hardware (2)
The document discusses various types of network hardware including:
- Local networking hardware such as network interface cards, cables, connectors, hubs, switches, servers, and workstations.
- Internetworking hardware such as line drivers, transceivers, bridges, switches, routers, and gateways.
Current internetworking devices are mostly confined to switches and routers. The document also examines networking interface cards in detail, describing their specifications and evolution over time from older technologies like Token Ring and 10BaseT to current Gigabit Ethernet standards.
Networking hardware (2)
The document discusses various types of network hardware including local networking hardware like network interface cards (NICs), cables, connectors, hubs, switches, servers and workstations. It also discusses internetworking hardware like line drivers, transceivers, bridges, switches, routers and gateways. It describes the characteristics of different NICs such as their speed, connector type, and bus technology. It also examines concepts like IRQ, I/O address, base memory address, and DMA used for resource allocation on NICs. Finally, it discusses network connectors and different types of hubs.
NETWORK INTERFACE CARD
The document discusses a Network Interface Card (NIC). It begins with an introduction to NICs, noting they connect systems to networks and allow communication. It then covers the history of NICs, types of NICs based on various features, the basic functions and working of NICs, and how NICs fit into the 7-layer OSI model. Specifically, it states that NICs operate at the physical layer (layer 1) and data link layer (layer 2) of the OSI model. The document provides details on each of these layers and how NICs enable communication and data transfer between networked devices.
Network Interface Card.pdf
The document discusses network interface cards (NICs). It begins with an introduction to NICs, describing them as cards that connect systems to networks and allow communication. It then covers the history of NICs, types of NICs based on various factors, basic functions and workings of NICs, functional parts, installation and configuration, advantages and disadvantages. The document aims to provide a comprehensive overview of NICs.
Using Cisco Devices to Build Up Different Networks
The document discusses 5 solutions for building networks of varying sizes using Cisco devices:
1. A small business network with 2-20 PCs can use a Cisco router and 24-port switch for an easy and cheap configuration.
2. For harsh environments, adding an ASA firewall, Cisco router, and 48-port switch provides stronger security and stability.
3. A network with around 100 clients across multiple offices benefits from a distribution switch to improve forwarding between offices, along with fiber modules for increased speed.
4. Larger networks supporting IP phones and video need powerful firewalls, voice-enabled routers, T1 modules, and PoE switches to power phones.
5. The largest
Cisco XFP-10GLR-OC192SR
This document provides information about the Cisco XFP-10GLR-OC192SR module and how to purchase it from Launch 3 Telecom. It describes Launch 3 Telecom as a supplier of Cisco and telecom equipment, outlines the payment and shipping options for purchasing the module, and details the warranty and support services provided by Launch 3 Telecom.
cisco-qsfp-40g-sr-bd-datasheet.pdf
The document is a datasheet for the Cisco QSFP-40G-SR-BD 40GbE transceiver module. It provides specifications for the module such as dimensions, wavelength range, cable distance support up to 150m on OM4 fiber, power consumption of 3.5W, and temperature operating ranges. The module supports 40GbE connections on duplex multi-mode fiber and complies with various IEEE and QSFP standards. It can be used to provide high-speed 40GbE connectivity for data center and enterprise network applications.
xc_sp2e45
The document introduces two new Spartan-IIE FPGA devices, the XC2S400E and XC2S600E, that address the need for low-cost, high-density, high I/O solutions. The new devices provide up to 514 I/Os, over double the distributed RAM of previous devices, and support for multiple I/O standards. They allow targeting a wider range of designs than previously possible at lower costs per I/O.
BRKARC-2881.pdf
Kureli Sankar will be giving a presentation on the Cisco ISR1000 and ISR1100 series routers. The presentation will include an overview of the hardware, features, technologies, use cases, a demo, performance and scale information, and questions and answers. It will also direct attendees to additional resources on the routers.
Data sheet c78-707001
The document describes the Cisco Nexus 3548x and 3524x switches, which are 1RU 10GbE switches that provide line-rate Layer 2 and 3 switching with ultra-low latency of less than 200 nanoseconds. They utilize Cisco's Algorithm Boost technology for innovations in latency, forwarding, and performance visibility capabilities such as three configurable modes for low latency including warp mode that lowers latency by up to 20%. The switches run the Cisco NX-OS operating system.
Cisco 3900 series router datasheet
Cisco 3900 Series Router Datasheet - Learn product details such as features and benefits, as well as hardware and software specifications.
Lika Electronic December 2016 Newsletter in English
Lika Electronic December 2016 Newsletter - Featured this month - New fieldbus versions to grow the E- series encoder offer. A new generation of CANopen, Profibus and DeviceNet encoders is now available from Lika Electronic to complement its popular E- series range.
Cisco WS-C4908GL3
The document describes the Cisco Catalyst 4908G Ethernet switch. It provides details on how to purchase the switch from Launch 3 Telecom, including payment and shipping options. It also provides information on the warranty and additional services offered by Launch 3 Telecom, such as repair, maintenance contracts, and installation services for the Cisco switch.
PICK N MX FLYER
The document discusses Juniper Networks' MX platform as a solution for broadband network gateways, highlighting its capabilities for supporting high subscriber volumes and bandwidth demands. It notes that the MX5 to MX960 platforms can terminate subscribers using modular interface cards or port concentrators. A subscriber management license is required and comes in tiers from 4,000 to 128,000 subscribers with a pay-as-you-grow model. The MX platform also supports features beyond subscriber management and has advantages of Juniper's experience in broadband markets and separation of control and forwarding planes.
Similar to nexus+line+cards.pdf (20)
JVL Multi-Axis High-Speed RS485 Expansion Modules for MAC Motor
JVL Multi-Axis High-Speed RS485 Expansion Modules for MAC Motor
Using Cisco Devices to Build Up Different Networks
Using Cisco Devices to Build Up Different Networks
Lika Electronic December 2016 Newsletter in English
Lika Electronic December 2016 Newsletter in English
Recently uploaded
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Recently uploaded (20)
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
nexus+line+cards.pdf
- 1. Cisco Nexus Training Cisco Nexus 9000, 7000, 5000, 2000
- 2. Line Cards in Cisco Nexus 7000 • There are two types of Line Cards or aka I/O modules for data plane forwarding – M series and F series. • M Series Cards were originally introduced for Layer 2+ Layer 3 functions while F Series were initially L2 only. • M Series Cards are feature-rich, L2/L3/L4 capable, have big buffers and large forwarding tables. • F Series cards provide high performance, high throughput , low latency as compared to M series Cards. • Latest Cards have reduced the gap of features between M and F series Line cards. e.g. F3 card is equally capable of providing all features of M1,M2,F1,F2E.
- 3. M Series Cards in Cisco Nexus 7000 M Series have further 3 types – M1,M2,M3 • M1 comes with below models with Port Density of 1G & 10G N7K-M148GS-11 , N7K-M148GS-11L , N7K-M148GT-11 N7K-M148GT-11L, N7K-M108X2-12L ,N7K-M132XP-12 N7K-M132XP-12L • M1 Cards have been marked as End of Life by Cisco
- 4. M1 Series Cards Comparison Chart
- 5. M2 Series Cards Comparison Chart
- 6. M3 Series Cards Comparison Chart
- 7. XL and non-XL Cards Line cards with XL option enables the module to work at full capability i.e. large Mac address table, IPv4 routes, IPv6 routes, Netflow entries, ACL entries SCALABLE_SERVICES_PKG license is required per chassis to enable XL card to work at it’s full potential else It will keep on working like non-XL card. XL card will have the keyword “L” at the end of line card name.
- 8. F1 Series Card Cisco introduced these cards for customers who did not want rich-feature but only high performance, low latency. F1 was pure Layer 2 Card. For Layer3 capability, VDC must have M Series cards. Later on, Layer 3 routing was available in F2,F2E,F3,F4 so there was no dependency on M card for proxy routing.
- 9. F2/F2E Series Cards Comparison Chart
- 10. F3 Series Cards Comparison Chart
- 11. Selecting the Right Device • You need to make sure that you pick the right device as per your requirements. You need to know about the below component to • 1. Chassis Hardware • 2. Line Card • 3. Supervisor Modue • 4. Fabric Module • 5. NX-OS • 6. Feature & License