This document provides an inspection and test plan for engineered wood flooring installation. It outlines 7 stages of work including preparation, material delivery, installation, and quality checks. Each stage lists specific inspection methods, acceptance criteria, responsible parties, and record keeping requirements to ensure the engineered wood flooring is installed according to approved shop drawings and specifications. The plan is intended as a guide to help monitor and control the quality of engineered wood flooring installation.
BSRIA's Blanca Beato-Arribas presented in Finland in February 2016 on Isolation Room testing. Featured elements include mock-up testing, validation, airtightness among others.
Presentation by BSRIA Compliance's Andy McGrath looking at why airtightness testing is a requirement of the Building Regulations. Will look at:
What causes Air Leakage
Common Air Leakage points
Part L Building Regulations & Testing regimes
BSRIA's Blanca Beato-Arribas presented in Finland in February 2016 on Isolation Room testing. Featured elements include mock-up testing, validation, airtightness among others.
Presentation by BSRIA Compliance's Andy McGrath looking at why airtightness testing is a requirement of the Building Regulations. Will look at:
What causes Air Leakage
Common Air Leakage points
Part L Building Regulations & Testing regimes
BSRIA's Peter Tse gave a presentation as part of RICS Skills programme. Peter covers the minimum requirements for specifications as well as the common approaches.
(1) To understand the process of converting Owner’s program into written and graphic documents for schematic design and design development. (2) To gain an insight into how quality is established for a Project. (3) To identify the considerations that influence the design of a Project. (4) To introduce the basic concepts of life cycle costs and value analysis. (5) To identify the attributes that should be included in the evaluation and selection of products.
Use Case study of Montclair State University for this session
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
BSRIA's Peter Tse gave a presentation as part of RICS Skills programme. Peter covers the minimum requirements for specifications as well as the common approaches.
(1) To understand the process of converting Owner’s program into written and graphic documents for schematic design and design development. (2) To gain an insight into how quality is established for a Project. (3) To identify the considerations that influence the design of a Project. (4) To introduce the basic concepts of life cycle costs and value analysis. (5) To identify the attributes that should be included in the evaluation and selection of products.
Use Case study of Montclair State University for this session
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
1. 42
S/No
Prepared By:
Date:
Legend
1
1.1
People
–In–
Charge
BR /
ADOS
Stages
Prior to
Start
Work
Records
Approved
Submission
Inspection
Method
Verified By:
Date:
BR – Builder Rep. ADOS – Architect /Designer / Owner / Supervisory Personnel
Review
Frequency
Each unit
type
Requirement
Reference
-
Acceptance
Criteria
Approved By
Date:
As per
Specification
& Approved
Drawings
Activity
Sample of Inspection and Test Plan (ITP)
Project:
Scope of Work: Engineered Wood Flooring
This form serves as a guide only.
Appendix A
Submission (Shop Drawing / Method Statement)
Shop Drawings
1.2 BR /
ADOS
Prior to
Start
Work
Approved
Submission
Review Each unit
type
- As per
Specification
Method Statement
1.3 BR /
ADOS
Prior to
Start
Work
Approved
Submission
Review Each unit
type
Section 2 As per
Specification
Method Statement
• Engineered Wood
• Underlay
• Skirting
• Wood Filler
• Moisture Barrier
• Adhesive
• Accessories
• Protection
2. 43
Legend BR – Builder Rep. ADOS – Architect /Designer / Owner / Supervisory Personnel
Types of Material Delivered
• Engineered Wood
• Skirting
• Underlay
• Moisture Barrier
• Wood Filler
• Adhesive
• Accessories
• Protection
2 Incoming Material Inspection
S/No
Prepared By:
Date:
People
–In–
Charge
Stages
Inspection
Method
Verified By:
Date:
Frequency
Requirement
Reference
Acceptance
Criteria
Approved By
Date:
Activity
Sample of Inspection and Test Plan (ITP)
Project:
Scope of Work: Engineered Wood Flooring
This form serves as a guide only.
Appendix A
1.4 BR /
ADOS
Prior to
Start
Work
Review Each unit
type
Section 2 As per
Specification
Sample Submission
• Engineered Wood
• Underlay
• Skirting
• Wood Filler
• Moisture Barrier
• Adhesive
• Accessories
• Protection
Approved
Submission
Records
2.1 BR /
ADOS
Prior to
Start
Work
Visual /
Specifications
Each
Delivery
Section 3 As per
Specification
Delivery
Document
3. 44
Legend BR – Builder Rep. ADOS – Architect /Designer / Owner / Supervisory Personnel
Selection of Material for Testing
• Engineered Timber
• Skirting
• Moisture Barrier
• Adhesive
S/No
Prepared By:
Date:
People
–In–
Charge
Stages
Inspection
Method
Verified By:
Date:
Frequency
Requirement
Reference
Acceptance
Criteria
Approved By
Date:
Activity
Sample of Inspection and Test Plan (ITP)
Project:
Scope of Work: Engineered Wood Flooring
This form serves as a guide only.
Appendix A
2.2 BR /
ADOS
Prior to
Start
Work
Visual /
Specifications
Each
Delivery
Section 3 As per
Specification
Storage and Handling of
Material
• Engineered Wood
• Skirting
• Underlay
• Moisture Barrier
• Wood Filler
• Adhesive
• Accessories
• Protection
Delivery
Document
Records
3 Preparation
2.3 BR /
ADOS
Prior to
Start
Work
Visual /
Testing
Random
Selection
Section 3 As per
Specification
Delivery
Document
3.1 BR /
ADOS
Prior to
Start
Work
Visual /
Specifications
Each
Location
Section 4 As per
approved
submission
Method of Installation Approved
Submission
3.2 BR /
ADOS
Prior to
Start
Work
Visual /
Measurement
Each
Location
Section 4 As per
approved
submission
Mock Up Unit Approved
Submission
4. 45
Legend BR – Builder Rep. ADOS – Architect /Designer / Owner / Supervisory Personnel
S/No
Prepared By:
Date:
People
–In–
Charge
Stages
Inspection
Method
Verified By:
Date:
Frequency
Requirement
Reference
Acceptance
Criteria
Approved By
Date:
Activity
Sample of Inspection and Test Plan (ITP)
Project:
Scope of Work: Engineered Wood Flooring
Appendix A
3.3 BR /
ADOS
Before
Installation
Visual /
Specifications
Each
Delivery
Section 3 As per
Specification
Surface Preparation Check
• Moisture content
• Surface evenness
• Hollowness
• Squareness at corners
• Interfacing joint
Checklist
Records
4 Installation
4.1 BR /
ADOS
Before
Installation
Visual /
Specifications
Each
Location
Section 5 As per
approved
submission
Apply Moisture Barrier
(Optional) (Allow to cure)
Checklist
4.2 BR /
ADOS
Before
Installation
Visual /
Measurement
Each
Location
Section 5 As per
approved
submission
Apply Adhesive with Notched
Trowel
Checklist
3.4 BR /
ADOS
Before
Installation
Visual /
Measurement
Each
Location
Section 4 As per
approved
submission
Setting Out Check Checklist
3.5 BR /
ADOS
Before
Installation
Visual /
Measurement
Each
Location
Section 4 As per
approved
submission
Cleanliness of Floor Checklist
This form serves as a guide only.
5. 46
Legend BR – Builder Rep. ADOS – Architect /Designer / Owner / Supervisory Personnel
Prepared By:
Date:
Verified By:
Date:
Approved By
Date:
S/No People
–In–
Charge
Stages
Inspection
Method
Frequency
Requirement
Reference
Acceptance
Criteria
Activity
Sample of Inspection and Test Plan (ITP)
Project:
Scope of Work: Engineered Wood Flooring
Appendix A
Records
This form serves as a guide only.
4.5
4.6
BR /
ADOS
BR /
ADOS
Installation
Installation
Visual /
Measurement
Visual /
Measurement
Each
Location
Each
Location
Section 6
Section 5
As per
approved
submission
As per
approved
submission
Protection
Install Skirting
Checklist
Checklist
4.3 BR /
ADOS
Installation
Visual /
Measurement
Each
Location
Section 5 As per
approved
submission
Install Underlay (if applicable) Checklist
4.4 BR /
ADOS
Installation
Visual /
Measurement
Each
Location
Section 5 As per
approved
submission
Install Engineered Wood Checklist
4.7 BR /
ADOS
Quality
Check
Visual /
Measurement
Each
Unit
Section 8 As per
Specification
Quality Checks Checklist