1. System Interface Presentation
For Temporary Control Center Capabilities
By Dimitri Gkarliaridis (ITS – PM), June 2015

3. o WIM (Weigh in Motion) & LPR (License Plate Readers)
o CCTV (IP cameras)
o DMS (Dynamic Message Sign)
o OVDS (Overheight Vehicle Detection System)
o ITS cabinets – local stations
o Wireless Antennae– station points
There is a Wireless Network set across TTR55, with 2 gateway
points:
1) Umm Salal Weigh Station (Existing dedicated Control
Room with Server used as Temporary ITS monitoring &
Managing Center)
2) At WIM6 location there is Connection hub to Fiber Optic
network leading to Salwa Road & Ashghal O&M (for future
integration – national TMC)

7.  Status diagram (which WIM are active/ communicate
with TMC )
 Traffic Flow diagram (per hour/day/week/month)
 Statistics of Violations (counting/ recording/comparison)
 Set up of different Weight Limits, for different categories
of vehicles

9.  Violation distribution per hour/day/week/month
 Response from each one WIM station
 Convenient Real Time Monitoring

10.  Panorama of WIM stations
 Status of every WIM station
 Working Lane Loops/sensors
 Vehicles count /Traffic measures /Traffic load data

12. Real time information (and log file/recording) about:
 Vehicle Length
 Vehicle Weight
 Vehicle Speed
 Automatic Recognition-classification of vehicle/truck
type, number of axles, weight per axle, etc
 Automatic/Real time incident data collection (date,
time, WIM location, passing lane 1 or 2)
 Violation log, and association with LPR (plate number)

14. LPR interface menu

17.  Real time Video streaming
 Snapshots capture, manual, automatic, time lapse,
on demand
 Full option of PTZ, remotely controlled
 360 degrees view
 Day /night operation
 High Resolution images
 Zoom in & Zoom out
 Recording option (based on storage capability/
quality demands)
 Monitoring DMS and other ITS equipment
 Traffic surveillance /incident detections-operator

22. Example of CCTV on location WIM5,
TTR section B (NOH2 site)
Night image, PTZ & Zoom
capabilities

23. Cascade view and option to choose of which CCTV
to monitor simultaneously at the same window

25.  Message Status
 DMS operation, normal, fault, etc
 View, Testing & Changing of Messages, automatically, periodically,
manually, on demand, on emergency, etc.
 Pre-defined messages, Real time messages, Graphic & color change
 Set display properties

28.  OVDS system is completely independent (alarm condition, pre-
defined message, Audio-Visual Alarm, etc)
 It can have a web-application, as a log file (alarm counter info)
 Just for monitoring and recording purposes (not active control)
 Is giving the signal through NTCIP to the Server at TMC

29.  Controller Status
 Power, fault indications
 Temperature
 PLC
 Hardware Settings & Properties

31. Umm Salal Ali
Weigh Station
A
B C
D
E
F
H
G
I
CCTV Pole
15 mtr
Ashghal S/L high
Mast
30 mtr. AP-pole
12 -15 mtr.
OVDS posts [pair]
8 mtr.
RDL-3000 RDL-3000 BS
Wireless Link

32.  Antenna Status
 Power, signal, link, data transfer speed
 Temperature

33. System Interface Presentation
For Temporary Control Center Capabilities
By Dimitri Gkarliaridis (ITS – PM), June 2015