Disconnect the battery before working on the electrical system to prevent damage. Remove side turn signal lenses by pressing them out of the fender opening and pull out the housing from the rubber socket. Individual bulbs can also be replaced by pulling them from the socket. Reinstall all components in reverse order.

1. 94-22
Side-mounted turn signals
Side-mounted turn signals, removing
and installing
CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:
Before disconnecting the battery determine the
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as outlined in this Repair Manual
or the Owner's Manual.
Removing
Installing
- Press side turn signal lens against retaining tab in direction of arrow
and carefully remove from fender opening.
- Carefully pull housing -2- out of rubber socket -1-.
- Bulb -3- can be pulled out of rubber socket -1- for replacement.
Page 1 of 2Side-mounted turn signals
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.94.4

2. - Install in reverse order of removal.
Page 2 of 2Side-mounted turn signals
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.94.4