3. FOIL
L U BRI CO M - F
01 - IDENTIFICATION OF THESUBSTANCE
AND OF THECOMPANY
Trade Name :LUBRICOM-F
Company :EL-KOMS San. veTic.
Adress :Eyüp Bulvarı Alınteri Sok. No:22 Eyüp / İstanbul / Turkiye
Emergency phone Number :0090 212 674 9006
Fax:0090 212 674 9026
E-mail :el-koms@ttmail.com
LUBRICANT-
LUBRICANT-FOIL
UPCOM
2
4. 1. Hazard description: Not applicable.
2. Information concerning particular hazards for human and environment:
The product does not have to be labeled due to the calculation procedure of the
“General Classification guideline for
preparations of the EU”in the latest valid version.
3.Label elements (Labelling according toEECDirective)
Safety Phrases
S1/2 Keep locked up and out of the reach of children.
S24 Avoid contact withskin.
S51 Use only in well-ventilatedareas.
4. Classification of the GHS
(Annex VI to Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of
Dangerous Substances)
Acute toxicity (Oral): Category 4 - H302 Harmful if swallowed.,
1. General information: No special measures required.
2. After inhalation: Supply fresh air; consult doctor in case of complaints.
3. After skin contact: If skin irritation continues, consult a doctor.
4. After eye contact: Rinse opened eye for several minutes under running water.
5. After swallowing: If symptoms persist consult doctor.
6.Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with
water spray or resistantfoam.
7. Protective equipment: Mouth respiratory protective device.
02 - HAZARDS IDENTIFICATIONS
3.- COMPOSITION / INFORMATION
ON INGREDIENTS
Description: Mixture of substances listed below with nonhazardous additions.
4. - FIRSTAID MEASURES
3
5. 1. Person-related safety precautions: Ensure adequateventilation
2.Measures for environmental protection: Do not allow to enter sewers/ surface or
ground water.
3.Measures for cleaning/collecting: Absorb with liquid-binding material (sand,
diatomite, acid binders, universal binders, sawdust).
4. Additional information: No dangerous substances are released.
1. Handling:
1. Information for safe handling: Use only in well ventilated areas.
2.Information about fire - and explosion protection: No special measures
required.
2. Storage:
1.Requirements to be met by storerooms and receptacles: No special
requirements.
2. Information about storage in one common storage facility: Not required.
3. Further information about storage conditions: None.
8.1 Personal protection equipment:
- General protective andhygiene measures
- Take care for sufficient ventilation or exhaust on the workshop place
- Avoid contact with eyes and skin
- Use barrier skin cream
- Remove soiled or soaked clothing immediately
- Do not eat, drink or smoke during work time
- Wash hands before breaks and after work
2. Hand protection:
Butyl rubber/nitrile rubbergloves
3. Eye protection:
Safety glasses
4.Additional Information: Wash hands before eating, drinking, smoking and
using the toilet.
06 - ACCIDENTAL RELEASEMEASURES
07 - HANDLING AND STORAGE
08 - EXPOSURE CONTROLS / PERSONAL
PROTECTION
LUBRICANT-FOIL
UPCOM
2
6. 09 - PHYSICAL AND CHEMICAL
PROPERTIES
9.1 General information
Form :Liquid
Odour :Odorless
Colour :White
PH :Notral
Explosive properties :No
Specific Gravity :1,00 –1,20 g/cm3
Oxidizing properties :No
Stability: Stable under normal usage conditions.
10 - STABILITYAND REACTIVITY
1.Thermal decomposition / conditions to be avoided: No decomposition if used
according to specifications.
2. Dangerous reactions: No dangerous reactions known.
11 - TOXICOLOGICALINFORMATION
1. Primary irritant effect:
1. On the skin: Can irritate on prolonged or repeated contact.
2. On the eye: Vapors released during curing may cause eye irritation.
3.On ingestion: Small amounts transferred to the mouth by fingers during use
should not injure. Swallowing large
amounts maycause digestive discomfort.
4.Other Health Hazard Information: This product contains (a) powder(s) hazardous by
inhalation.This is not
relevant to the current physical form of the product, which is not in a respirable form.
12 - ECOLOGICAL INFORMATION
1. Ecotoxicity:
- Effect on the ozone layer :Not dangerous for the ozone layer (1999/45/EC)
- Greenhouse effect :No dataavailable
- Effect on waste water purification :No data available
5
7. ADR This material is not classified as dangerous under ADR regulations.
RID This material is not classified as dangerous under RID regulations.
IMDG This material is not classified as dangerous under IMDG regulations.
IATA This material is not classified as dangerous under IATAregulations.
CHIP This material is not classified as dangerous under CHIP regulations.
15.1.2
S1/2:
S9:
S21:
S26:
Safety Phrases
Keep locked up and out of the reach of children.
Keep container in a well ventilated place
When using do not smoke
In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
S36:
S38:
15.3
Wear suitable protective clothing
In case of insufficient ventilation wear suitable respiratory equipment
Special labeling of certainpreparations:
Ozone depleting chemicals: No ozone depleting chemicals are present or used in
manufacture.
13 - TRANSPORTINFORMATION
15 - REGULATORY INFORMATION
1. Description of thePhrase Codes:
Labelling in accordance with directives CLP and 1999/45/EC
16 - OTHER INFORMATION
All information and instructions provided in this Safety Data Sheet (SDS) are based on
the current state of scientific and
technical knowledge at the date indicated on the present SDS.The company supplying
entity shall not be held responsble
for any defect in the product covered by this SDS, should the existence of such defect
not be detectable considering the
current state of scientific and technical knowledge.
Department issuing SDS:Product safetydepartment.
Contact: Product safety department Tel: 0090 212 674 9006 Fax: 0090 212 674 9026
E-mail :el-koms@ttmail.com
6
LUBRICANT-FOIL
UPCOM
2
9. EC DECLARATION OF
CONFIRMITY
UPCOM TELEKOMUKASYON BILIŞIM TEKNOLOJILERI URUNLERI SAN. VE TIC. LTD. STI.
According to Machinery Directive2006/42/EEC
Declaration:
Herewith we declare under our own responsibility that theproducts
designated below
Products:
Fiber optic cable blowing machine
are manufactured in accordance with theEC Directives
Directives:
Managing Director
Machinery Directive 2006/42/EEC including their amendments.
Harmonised Standards: TSENISO12100, EN60204-1
Istanbul, 2018
