1. BLOQCELL 2000 Phone signal Blocker in Cell Phones
All the signals in specific cell phones are simultaneously paralyzed. Also the reception of signal is
prohibited. This system of prohibition uses a modern technology to interfere with the signal
between the cell phones and the base tower with which it communicates.
This cellular prohibitor works through the emission of radio frequency waves of low power that
accumulate to block cell phones in an area of between 20 and 25 meters of the radio.
When you activate it with a button the LED switches on and the cell phones completely lose their
connection to the tower and on their screens appears “WITHOUT SERVICE”, “WITHOUT
NETWORK" or the screen might seem normal but you can neither emit nor receive any
communication.
Characteristics
It blocks of all signals in cell phones as AMPS, ETACS, GSM900, and DCS1800.
All specific phone signals will be simultaneously paralyzed.
Effective area of coverage is within a circle of 20 to 25 meters.
It paralyzes any transmission or reception of phone signals in cell phones.
It foresees any interference or disturbtion of cell phone calls. Through its low power and low
radiation it does not harm the human health.
BC2000 grants a free and tranquil environment.
To extend the area of coverage, we recommend installing several units that are being distributed
conveniently in the area you wish to cover.
Easy installation, you connect it to an electric intake and the units will work immediately.
The construction of the device allows heat interferences and will extend its running time
guaranteeing a use without interruptions.
Areas of use
Areas where the use of cell phones is restricted, like prisons, police stations, government
buildings, banks, schools, etc.
Opera Theater Schools Lecture Halls Auditorium
Exhibition Areas Court Rooms Gyms Museums
Churches Temples etc.
Specifications of the Block
Frequency: 869~894MHz 916~960MHz
1805~1880MHz
Broadband: 25MHz 44MHz 75MHz
Protocols
Analogs: AMPS, N-AMPS, TACS
(Usage in America)
Digitals: GSM, CDMA, TDMA, PCS (Usage in
America)
Total Power of Exit
The total average of the exit is: 31dBm (1W)
Power source: AC: 100V~240V
The apparatus is only delivered to those clients who can justify its use such as banks, penal
authorities and businesses running entertainment centers.
For more information contact us at: info@ltinews.com