Insulating shock safety rubber mats is 15652
Rubber Insulating Matting : BS921, ASTM, D178, VDE0303, IDE6001 Electrical Safety Switchboard Rubber Matting Electrical switchboard rubber safety matting to BS921, ASTM, D178, IDE61111, VDEO303 specifications, including oil resistant electrical safety matting. Electrical switchboard rubber safety matting is available in various cut lengths, widths and thicknesses - T&D UK can provide full rolls or singular cut mats. Electrical switchgear safety matting prevents electrical shocks whilst working on open or live LV-HV switchgear and electrical equipment including 3.3kV, 6.6kV, 11kV, 15kV, 20kV and 33kV systems. The Factories Acts and Health & Safety at Work Acts require the provision of permanent insulation to prevent electrical shock danger to persons employed in the generation, transformation and distribution of electricity. Electrical matting is the recommended safety flooring at switchboards, substations, transformers and electrical workbenches. All electrical safety rubber matting products are vigorously tested to comply with the relevant standards and are manufactured using only the finest rubber compounds - the quality of these electrical switchboard mats is essential in complying with and maintaining electrical safety working standards. Insulating rubber matting is increasingly stipulated for electrical safety by UK DNO's for cable jointing applications - use of insulating rubber matting while jointing cables provides a secondary level of protection in the event of insulating gloves being damaged during use. NOTE : Electrical rubber matting exhibiting surface cracks or punctures should be replaced immediately.
