1. For more information, contact us on: telephone +61 (0)2 9491 6500, email info@mstglobal.com or visit our website at www.mstglobal.com
2.4 GHz Vehicle Antenna
Wi-Fi Vehicle Antenna for underground mining and tunnelling
DESIGN
■The solid block casing makes the antenna extremely impact resistant and suitable for the most hostile environments where installations are subject to rock fall.
■Its compact size and high gain make it ideal for installation on vehicles, and in confined spaces such as shaft environments.
■The radomeshape of the antenna greatly improves its reliability in wet environments.
■To withstand maximum lateral forces, it is mounted with six M8 cap head screws.
TheRadiationpatternandthe3Dplotoftheantennashowsexcellentforwardgainandminimaldifferenceinhorizontalandverticalorientation.
8.5mm holes for M8 cap head screws
Horizontal polarisation line
N-Type female




Horizontal polarisation line

2. AboutMineSiteTechnologies:MineSiteTechnologiesPtyLimited(MST)providescommunicationsnetworksandoperationaloptimisationsolutionswhichassistorganisationsinthemining,resourcesandindustrialsectorstooptimallymanagetheircorebusinessoperations.EstablishedinAustralia25yearsagoandoperatingglobally,thecompanyspecialisesinthedesign,manufacture,deploymentandsupportofcriticaltechnologiesforcommunications,automation-enablement,productionoptimisation,vehicleandpersonneltracking,andsafetyinhazardousundergroundandsurfaceenvironments.Apioneeringforcewithintheminingindustry,thecompanyhasover500deploymentsatminesitesworldwide.CustomersacrosstheglobetrustMSTsolutionstohelpoptimiseoutput,minimisecostandreducerisk,resultinginacompellingROIontheirtechnologyinvestments.
For the optimal gain, the typical UG Vehicle (LHD) installation utilises two antennas mounted on opposite sides of the cabin.
Weight
Dimensions
Ø 150 x 35 mm
Frequency Range
2.3 -2.6 GHz
Gain
11.3 dBi
Beamwidth Angles
50°
Wind Survivability
< 200 km/h
Polarization
Dual Linear
Front-to-Back Ratio
≥25
VSWR
≥1.5
Connector
N-Female
Technical Information
Welded or bolted retro fitting is easy with an optional 8mm bracket and fasteners.