This document provides an index and product specifications for various safe and security products from National Safe. It includes vault doors, demountable vaults, strongroom doors, cash trolleys, deposit boxes, and various sizes and categories of safes. National Safe prides itself on research and development to improve products, as well as a large service network to install and maintain all brands of safes.
2. National Safe
Denis and Neville Austen’s family has played a major
role in the South African safe and security industry
since 1875.
Following in the family tradition, Biltmore Safe
Company was established in Johannesburg in 1991.
While being restrained from manufacturing, the
opportunity arose in 1995 to purchase a safe company
in Cape Town. Since then the company has traded as
National Safe and continues to deliver quality
products and service at competitive prices.
Research and Development
Due to market demand R & D is an on-going procedure
and all efforts are concentrated on improving existing
designs as well as the development of new products.
Maintenance and Servicing
National Safe has a large service and maintenance
network, and can carry out service and installation
work on all brands of safes and security equipment.
We pride ourselves in having the most skilled
technicians in the country, who are available on a 24-
hour basis.
3. INDEX
PAGE 1……………………………………………………………………………….………….VAULT DOOR AND GRILLE
GATE
PAGE 2 & 3…………………………………………………………………………….……………………DEMOUNTABLE
VAULT
PAGE 4……………………………….……………………………………………………...BANK ACCESS CONTROL BOOTHS
PAGE 5…………………………………………………………………………………..…….……………..RECORD ROOM DOOR
PAGE 6…………………………………………………………………………………………….……………STRONGROOM
DOOR
PAGE 7…………………………………………………………………………….………………….…………………………...SBV
UNIT
PAGE 8……………………………………………………….……………………………………………………………………...PC
UNIT
PAGE 9…………………………………………………….………………………………………………………………CASH TROLLEY
PAGE 10……………………………………………………….……………………………………………..…...DOCKING TROLLEY
PAGE 11………………………………………………………….…………………………….……………….WIRE MESH
TROLLEY
PAGE 12…………………………………………………………….………………………………………………..……………..CTU100
PAGE 13………………………………………………………………..…………………………………………..……………………
BCTU
PAGE 14……………………………………………………………………..….……………………………………...VIEWING
PANEL
PAGE 15…………………………………………………………….………………………………….…..FD20 6
COMPARTMENT
PAGE 16………………………………………………………….…….……………………………….
……………………………….FD40
PAGE 17….……………………………………………………………….……………………..…..….FD40 12 COMPARTMENT
PAGE 18……………………………………………………….…………….…………….…….……..………….TELLER DROP
SAFE
PAGE 19………………………………………………………….…………….………….……….……....UNDER COUNTER
SAFE
PAGE 20…………………………………………………………………………….…….……..……STD UNDER COUNTER
SAFE
PAGE 21……………………………………………………………………………….………………….UNDER COUNTER
INSERT
PAGE 22…………………………………………………………………………………..………………..………………CORNER
SAFE
PAGE 23………………………………………………………………………………………..……………..…NED TREASURY
SAFE
PAGE 24………………………………………………………………………………………….……..………………TREASURY SAFE
PAGE 25……………………………………………………………….…………………………….……..…….NED KABA
AXESSOR
4. INDEX
PAGE 30 …………….………..…………………………………………………………………….……………ANTI BANDIT DOORS
PAGE 31 ………………………………….……………………….………..……………………….………………………………AIRTUBE
PAGE 32 …………………………………………………………….……………………………….……………………….TRUCK SAFES
PAGE 33 ….………………….………………………………………..…………………………….…..DIGITAL ELECTRONIC SAFE
PAGE 34 …..…………………………………….…………………..……………………………….………………………..WALL SAFES
PAGE 35 .…………….………………………………………………..……………………………….…………………….GUN LOCKER
PAGE 36 .………………………….…………….………………….…………………………………….……………..SABS RIFLE SAFE
PAGE 37 …………………………………..…….…………….……………………………………….4 DRAWER FILING CABINET
PAGE 38 ………………………………………….………….………………………………………………..OFFICE QUALITY SAFES
PAGE 39 ………………………………………….……….….………………………………………………..CATEGORY ONE SAFES
PAGE 40 ..………………………………………….……….…………….…………………………………..CATEGORY TWO SAFES
PAGE 41 ..………………………………………….……….……………………………………….CATEGORY TWO ADM SAFES
PAGE 42 …………………………………………….….………………………CATEGORY TWO ADM FLUSH FRONT SAFES
PAGE 43 …………………………………………….…….……………………..CATEGORY TWO ADM REAR ENTRY SAFES
PAGE 44 ..…………………………………………….….…………………………………………………CATEGORY THREE SAFES
PAGE 45 ……………………………………………….………………….………….CATEGORY THREE FLUSH FRONT SAFES
PAGE 46 .……………..……………………………….…………..……………………CATEGORY THREE REAR ENTRY SAFES
PAGE 47……………………..…………………….…….………….……...………………………………..CATEGORY FOUR SAFES
PAGE 48 ………………………………………………….…………..…….………….CATEGORY FOUR FLUSH FRONT SAFES
PAGE 49 .…………………………….…………….…….………………………..…….CATEGORY FOUR REAR ENTRY SAFES
PAGE 50 ………………………………………………….………….…….…………………………………..CATEGORY FIVE SAFES
PAGE 51 ………………………………………………….……………….…….……….CATEGORY FIVE FLUSH FRONT SAFES
PAGE 52 ………………………………………………….……..………………………….CATEGORY FIVE REAR ENTRY SAFES
PAGE 53 ………………………………………………….………………….……………………..COMMERCIAL CORNER SAFES
PAGE 54 ..………………………………………………….…………………….…………….4060 DOUBLE DOOR DROP SAFE
PAGE 55 ..………………………………………………….……………………….……………………………………NED CITI-TRACK
PAGE 56 …………………………………………………….……………………..…….……140LT DOUBLE DOOR DROP SAFE
PAGE 57 ………………………………………….………….………………….….…..DOUBLE DOOR CELLPHONE CABINET
PAGE 58 .…………………………………………………….………………………………..……………………….T20 DIGITAL SAFE
5. VAULT DOOR
&
GRILLE GATE
BODY
The overall thickness is 240mm, with a solid
main slab 165mm thick, incorporating barrier
materials which ensure the highest degree of
protection in the event of an attack by oxy-
acetylene, explosives, drilling, angle grinder
and hand tools
High security grille gate covered with wire
mesh, safe type hinges, fitted with GG slam
lock with a mechanical internal override
facility.
LOCKING 2 x 8 lever high security locks
1 x 4-Wheel combination lock
Relocking devices fitted
1 x GG slam lock fitted with time delay lock
BOLTWORK 4-Way locking
FINISH Dry gold
OVERALL FRAME
SIZE
2190 H x 1410 W
WALL OPENING 2000 H x 1110 W
WEIGHT 1950 kg
RATING CATEGORY 3 – 4 – 5
1
6. CONSTRUCTION OF A DEMOUNTABLE VAULT
The vault consists of a number of interlocking panels which bolt together from the inside
of the vault using high strength bolts. Countersunk bolts are used on the floor panels to
ensure a flush walking surface.
Panels are generally 1 metre wide to facilitate handling.
The overall height of the vault is 2.4 metre, with the length and width dependant on the
customer’s requirements. The vault dimensions are not restricted to any standard sizes
and all units are completely pre-assembled in our factory prior to installation to ensure a
proper fit.
2
7. GENERAL SPECIFICATION
The vault has met the requirements of the SABS 949-1969 for Category 4. The ‘Cerestra’ barrier
withstands attack from hand tools, including angle grinder and also attack from oxy-acetylene
and oxy-arc apparatus.
The vault has also been tested for fire resistance and here we have obtained a 2 hour rating.
The overall thickness of a panel is 120mm and both the inner and outer faces are plated, and
painted with a high quality primer prior to delivery.
Fittings: Standard fittings are a Category 3 or 4 main door. The door is supplied with a 4 wheel
combination lock and 2 eight lever key locks. A ramp is also supplied.
Optional extras: The vault can be fitted with a Category 3 or 4 emergency door, a grille gate
with up to 3 key locks, and additional combination, or time locks can be fitted to the doors.
WHY A DEMOUNTABLE VAULT
To build a reinforced concrete vault is a costly and lengthy project which normally has to take
place when the initial building is being constructed. This also means that the vault is permanent
and is lost should the need arise to change premises.
By installing a demountable vault, many of these disadvantages are overcome. The cost of a
demountable vault is considerably lower than that of a reinforced concrete one and can be
constructed in a relatively short period of time. Should the need arise to move premises it is
also a simple task to dismantle the vault and reassemble it at the new location.
A demountable vault can be designed to meet the size requirements of the client, with the only
limiting factor being the load per square metre that can be carried by the building floor.
Allowance is made for the provision of ventilation, lighting and any electronic security devices,
should they be required.
3
8. BANK ACCESS
CONTROL BOOTHS
DIMENSIONS
BOOTH EXTERNAL DIMENSIONS (MM) CLEAR DOOR OPENING (MM)
Standard Booth (Single dual direction) H 2 190mm x W 1 110mm x D 1 188mm H 2 100mm x W 1 022mm
Double Booth (One in and one out) H 2 190mm x W 2 176mm x D 1 188mm H 2 100mm x W 1 022mm
Mini Series V1 (One Man Booth) H 2 205mm x W 750mm x D 650mm H 1980mm x W 600mm
FEATURES
SECURITY
Our range of access booths can be customised to suit particular decor and design standards for an
integrated appearance with a clean and elegant facade.
Construction is modular around a sturdy aluminium or steel frame to adapt to any floor layout.
Alternative materials can be offered to suit specific requirements.
A wide range of colour options are available.
Glazing fitted to the booth is according to the level of security from laminated safety glass to
bullet resistant glass.
The standard booth is wheelchair and pram user friendly.
OPTIONAL FEATURES
TYPICAL BANK BOOTH CONTROLLER MIMIC PANEL
The National booth controller has all the normal features required for the banking industry:
1. FIRST ENTRY (one person only) 5. SINGLE or MULTIPLE number of people entering and leaving can be controlled
2. STAFF entry by push-button from control mimic. 6. BATTERY BACKED The system has battery back up in case of power failure.
3. BANK OPENS both booths operational. 7. Each booth also gets fitted with Robot door status indicators (red & green)
4. BANK CLOSED only the outgoing booth in operation.
OPERATIONS
4
9. This record room door is multi-purpose, designed to provide excellent fire protection and at
the same time a reasonable degree of resistance to burglary. The frame is of robust angle
section and is provided with four grip lugs for building in.
A high security 7-lever keylock which incorporates numerous anti-picking devices is fitted. A
keyless combination lock can be fitted as an optional extra.
SPECIFICATION REFER
SECTIONAL DRAWING
NSD-S00
A Wall Opening 1 930mm x 880mm
B Clear Opening (Door open 180°) 1 880mm x 790mm
C Clear Opening (Door open 90°) 720mm
D Over Door Frame 1 980mm x 990mm
E Overall Width of Door & Frame (Door open 180°) 1 800mm
F Projection of Door open to 90° 875mm
G Projection of Door open to 180° 145mm
MASS 250 Kg approx.
* STANDARD LOCKING 1 Key lock
Outer Door Plate 6 mm
Ventilators are designed with a fine wire gauze screen. The single-ended
pattern is suitable for use in Fire Resisting Strongrooms, whereas the
double-ended pattern is preferable for use of Burglar Resisting
Strongrooms. Double ended ventilators are the telescopic type and
suitable for walls from 150mm to 300mm thick. Larger sizes are made to
order.
Fascia Plate 225mm x 225mm
Wall Opening 180mm x 180mm
Single Double
• As our policy is one of constant improvement, we reserve the right to alter this specification.
5
10. STRONGROOM DOORS
SABS Specification 949-1997 for Strongroom doors
MODEL NSD-25 CATEGORY ONE
The strongroom door embodies the most up-to-date features that protects the lock and vital
parts. The high security keylock secures four sliding steel bolts at the front edge of the door
with fixed bolts at the back.
MODEL NSD-35 CATEGORY TWO (Light
Duty)
This strongroom door is of heavier construction than the S.25 embodying the most rigidly tested
features including a remote relocking device protecting against explosive and other attacks.
Two locks secure four sliding bolts at the front edge of the door with fixed bolts at the back.
MODEL NSD-45 CATEGORY TWO (Heavy
Duty)
This strongroom door far exceeds the SABS Category Two specifications. A remote re-locking
device is provided to protect against explosive and other attacks. Six sliding steel bolts are
provided at the front edgte with fixed bolts at the back.
MODEL NSD-55 CATEGORY TWO ADM
This strongroom door is specifically designed to give protection against attacks by disc grinders
and explosives. Overall door thickness is in excess of 160mm and locks and other vital parts
are protected by barrier material and solid steel. Two keylocks secure six sliding bolts at the
front edge of the door with fixed bolts at the back. A combination lock can be fitted as an
optional extra.
FITTINGS
All fittings are in black finish
Model NSD-S45
SPECIFICATION REFER
SECTIONAL DRAWING
NSD-S25 NSD-S35 NSD-S45 NSD-S55
A Wall Opening 1 930 x 880 1 930 x 880 1 930 x 880 1 960 x 940
B Clear Opening (Door open 180°) 1 880 x 790 1 880 x 800 1 880 x 800 1 880 x 790
C Clear Opening (Door open 90°) 715 715 710 710
D Over Door Frame 1 980 x 990 1 980 x 990 2 020 x 1 030 2 030 x 1 085
E
Overall Width of Door & Frame
(Door open 180°)
1 800 1 800 1 800 1 950
F Projection of Door open to 90° 875 875 875 950
G Projection of Door open to 180° 145 145 145 210
MASS (Kg) 352 Approx 380 Approx 540 Approx 716 Approx
* STANDARD LOCKING 1 Keylock 2 Keylock 2 Keylock 2 Keylock
Outer Door Plate 10 12 20 80
•A keyless combination lock can be fitted as an optional extra
•As our policy is one of constant improvement, we reserve the right to alter this specification.
6
11. BODY Body constructed out of 3mm steel and door 6mm steel
Outer door on SBV side fitted with a bolt on plate with
boltwork system
and a profile cylinder lock (multi lock, high security key to
Standard Bank Requirements) SBV Side
LOCKING SBV side: 2 x Profile Cylinder locks (multi lock high security
key to STD requirements
Bank side: 1 x Medico mechanical time delay lock with
indicator box and
2 x N8 7lever key locks
FINISH Dry gold
EXTERNAL SIZES Single Bag
Double Bag
¾ Bagger
710 H x 620 W x 470 D
710 H x 620 W x 870 D
800 H x 800 W x 800 D
WEIGHT Approximately 50 - 75 kg
RATING Plate safe
7
12. PC UNIT
BODY Body constructed out of 3mm steel and door 6mm steel
Left door fitted with 2 x key lock and Medico mechanical
time delay lock with a posting slot 100 x 55mm
Right door fitted with 2 x key locks
INSERTS Right hand compartment fitted with a dividing shelf
LOCKING 4 x N8 7lever locks (2 on each door)
1 x Medico mechanical time delay lock with indicator box
FINISH Dry gold
EXTERNAL SIZES 650 H x 620 W x 500 D
WEIGHT 75 kg
RATING Plate safe
8
13. CASH TROLLEY
BODY Body constructed out of 1.6 mild steel consisting of 6 drawers;
1 x side flap fitted with 2 key locks (top teller and bottom
master)
INSERTS Top drawer fitted with coin bowl and note divider
LOCKING 2 x Jaguar garage locks
Top lock slave key and bottom lock Master key
FINISH Dry gold
EXTERNAL SIZES 900 H x 350 W x 500 D
WEIGHT 50 kg
RATING Plate safe
9
14. DOCKING TROLLEY
BODY Body constructed out of 1.6 mild steel consisting of 6 drawers;
3RD
Drawer deposit drawer and 4th
draw fitted with time delay
and releasing mechanism 1 x side flap fitted with 2 key locks
(top teller and bottom master)
INSERTS Top drawer fitted with coin bowl and note divider
LOCKING 2 x Jaguar garage locks
1 x Medico mechanical time delay lock
Pull release mechanism in time delay drawer to release
trolleys from docking station
FINISH Dry gold
EXTERNAL
SIZES
900 H x 350 W x 500 D
WEIGHT 55 kg
RATING Plate safe
10
15. BODY Body constructed out of angle line frame covered with wire
mesh
Swivel caster wheel and lockable hinged top
LOCKING 2 x padlocks not supplied by National Safe
FINISH Dry gold
EXTERNAL SIZES 900 H x 620 W x 620 D
WEIGHT 50 kg
RATING Plate safe
11
16. CTU TRANSFER CHUTE
BODY 6mm Mild steel body with interlockable doors at each side
with and extendable conveyor roller tray
FINISH Grey Powder coated
ITEM CODE SBCTU100
EXTERNAL SIZES 600 H x 480 W x 750 Long
WALL OPENING 550 H x 435 W
WEIGHT 80 kg
RATING Plate
BODY 6mm Mild steel body with interlockable doors at each side
with and extendable conveyor roller tray
12
17. BCTU
BODY Body constructed out of 3mm steel
FINISH Grey Powder Coated
EXTERNAL SIZES 975 H x 750 W x 770 D
WEIGHT 163 kg
RATING Plate safe
13
18. VIEWING PANEL
BODY Body constructed out of 2.5mm mild steel for inner and outer
body
With a glass panel of 190 x 190mm x 38mm thick
1 x transfer tray in stainless steel finish.
FINISH Dry gold
OVERALL
FRAME SIZE
350mm x 350mm x 75mm thick (dry metal wall)
Should required for brick wall client need to confirm wall
thickness
WEIGHT 25 kg
RATING Plate
14
19. FD20 6 COMPARTMENT
BODY Body constructed out of 3mm steel and door 6mm steel
INSERTS 6-Compartment insert with dual control locking S&G 4440
dual control locking
LOCKING 3 x N8 7lever locks
FINISH Dry gold
EXTERNAL SIZES 1000mm H x 500 mm W x 500 mm D
INTERNAL SIZES 994 H x 494 H x 465 D
WEIGHT 130 kg
VOLUME 230ℓ
RATING Plate safe
15
20. FD40 UNIT
BODY Body constructed out of 3mm steel and door 6mm steel
LOCKING 6 x N8 7lever locks (3 on each door)
FINISH Dry gold
EXTERNAL SIZES 1000 H x 1000 W x 500 D
INTERNAL SIZES 994 H x 994 W x 465 D
WEIGHT 163 kg
VOLUME 460ℓ
RATING Plate safe
16
21. FD40 UNIT 12 COMPARTMENT
BODY Body constructed out of 3mm steel and door 6mm steel,
INSERTS 12 x Dual control compartments
LOCKING 6 x N8 7lever locks (3 on each door)
Compartment fitted with S&G dual control locks
FINISH Dry gold
EXTERNAL SIZES 1000 H x 1000 W x 500 D
WEIGHT 198 kg
RATING Plate safe
17
22. TELLER DROP SAFE
BODY Body constructed out of 3mm steel and door 4mm steel
With a rotating drum
LOCKING 1 x Medico lock and 2 x 7 lever Keylocks
BOLTWORK 2 x N8 7lever locks
1 x Medico mechanical time delay lock with indicator box
FINISH Battleship Grey
EXTERNAL SIZES Large Unit: 850 H x 450 W x 460 D
Small Unit: 690 H x 450 W x 460 D
WEIGHT 40 kg
RATING Plate safe
18
23. UNDERCOUNTER SAFE
BODY Overall thickness Body: 75mm
Overall thickness Door: 75mm
2 x Fix drawer on top with side bar locking
Top drawer fitted with dividers for notes and a coin bowl
INSERTS 1 x Drop safe insert fitted with 1 x Medico mechanical time
delay lock
LOCKING 1 x Combination lock and 2 x 7 lever keylocks
BOLTWORK 3 way boltwork with fix dog bolt at back
FINISH Dry gold
EXTERNAL SIZES 870 H x 635 W x 635 D
INTERNAL SIZES 450 H x 490 W x 410 D
WEIGHT 480 kg
VOLUME 90ℓ
RATING Category 4
19
24. STANDARD
UNDERCOUNTER SAFE
BODY Body construction consisting of outer and inner plate filled
with reinforcing and barrier material
Overall body thickness: 85mm
INSERTS 1 x Drop safe insert fitted with 1 x Medico mechanical time
delay lock and 1 x N8 7 lever keylock
1 x Shelf
LOCKING 1 x Combination lock and 2 x 7 lever keylocks
BOLTWORK 4 way boltwork with fix dog bolt at back
FINISH Dry gold
EXTERNAL SIZES 920 H x 750 W x 800 D
INTERNAL SIZES 720 H x 510 W x 450 D
WEIGHT 1100 kg
VOLUME 165ℓ
RATING Category 3 – 4 – 5
20
25. UNDERCOUNTER INSERT
BODY Body constructed out of 3mm steel and door 6mm steel
With a posting slot 100 x 55mm
LOCKING 1 x KABA Axcessor lock and 2 x 7 lever Keylocks
BOLTWORK 1 x N8 7lever locks
1 x Medico mechanical time delay lock with indicator box
FINISH Dry gold
EXTERNAL SIZES 490 H x 240 W x 380 D
WEIGHT 40 kg
RATING Plate safe
21
26. CORNER SAFE
RATINGS Category 4
FINISH Dry Gold
EXTERNAL SIZES 740H x 1027W x 726D
WEIGHT ± 500 kg
INSIDE FITTINGS DROP FITMETNON THE RIGHT HAHND HALF OF THE SAFE. DROP SLOT
250MM WIDE X 50MM HIGH
LOCKING 1 X COMBINATION LOCK AND 2 N8 KEYLOCKS
INSERT: 1 X MEDICO LOCK AND 1 X KEY LOCK
VOLUME 132lt
22
27. TREASURY SAFE
BODY Overall thickness Body: 75mm
Overall thickness Door: 175mm
FITTINGS 3 x Fix Shelves and 2 x half width lockable drawers
LOCKING 1 x KABA Axcessor lock: 2 x 7 lever Keylocks and 1 x 4-
wheel combination lock
FINISH Battleship Grey
EXTERNAL SIZES 1650 H x 700 W x 750 D
INTERNAL SIZES 1450 H x 500 W x 470 D
WEIGHT 1350 kg
VOLUME 340 ℓ
RATING Category 4
23
28. TREASURY SAFE
BODY Overall thickness Body: 75mm
Overall thickness Door: 175mm
INSERTS -
OPTIONS
2 Compartment unit with dual locking (S&G 4440 lock)
4 Compartment unit with dual locking (S&G 4440 lock)
6 Compartment unit with dual locking (S&G 4440 lock)
LOCKING 1 x KABA Axcessor lock and 2 x 7 lever Keylocks
BOLTWORK 4 way boltwork
FINISH Dry gold
EXTERNAL SIZES 1400 H x 710 W x 755 D
INTERNAL SIZES 1200 H x 510 W x 460 D
WEIGHT 1201 kg
2 Compartment: 1231 kg
4 Compartment: 1261 kg
6 Compartment: 1294 kg
VOLUME 280ℓ
RATING Category 4
24
29. KABA AXESSOR
The modular electronic safe lock can be networked or used as a stand-alone unit. It can be used wherever organizational
flexibility, fast response and increased security are required. It is the ideal safe locks for organizations with large
branch networks, such as banks, post office, retail and restaurant chains.
Variants
Axessor (black)
Metal housing in black, red navigation keys
Built-in USB interface for audit output and programming by computer
Built-in terminals for alarm connection
e-B@x Networkmodul (optional)
Software
Installation Software AS 280 for network preparation
Runs on Microsoft® Windows® operating systems
Operator selectable language
Software package including cable / dongle:
USB dongle for copy protection
Software Development Kit AS 283 to integrate Axessor lock in third party software
Runs on Microsoft® Windows® operating systems
Software package including dongle:
USB dongle for copy protection
Programming Software AS 254 for programming the safe lock Axessor
Runs on Microsoft® Windows® operating systems
Operator selectable language
Software package including cable / dongle:
USB dongle for copy protection
Audit-Software AS 286 for readout the cache memory
Runs on Microsoft® Windows® operating systems
Operator selectable language
25
30. WHOLE SALE SAFE
BODY Overall thickness Body: 75mm
Overall thickness Door: 100mm
LOCKING Bank Side: Fitted with Combination lock 2 x 7-lever key
locks and SBV dallas tag system.
SBV Side: Fitted with 2 key locks and SBV dallas tag
system
BOLTWORK Bank side: 1 way boltwork with fix dog bolt at back
SBV Side: 3 way bolt work with fix dog bolt at back
FINISH Dry gold
EXTERNAL SIZES 1400 H x 710 W x 830 D
INTERNAL SIZES 1200 H x 510 W x 610 D
WEIGHT 1291 kg
VOLUME 280ℓ
RATING Category 4
26
31. BODY 6mm Mild steel outer skin and an exterior turn handle, 1 x
viewing panel 130mm x 130mm clear opening in the centre
to accept a SB03 BR Glass view panel securely fixed in a
25mm rebate on all sides and with a stainless steel slide
cover on the inside.
LOCKING 1 x Union N106
1 x N8 lock
1 x profile cylinder lock
BOLTWORK 3-Way locking
FINISH Dry gold
OVERALL FRAME
SIZE 2000 H x 790 W
WALL OPENING 1900 H x 690 W
WEIGHT 225 kg
27
32. BODY 6mm Mild steel outer skin and an exterior turn handle, 1 x
viewing panel 130mm x 130mm clear opening in the centre
to accept a SB03 BR Glass view panel securely fixed in a
25mm rebate on all sides and with a stainless steel slide
cover on the inside.
LOCKING 2 x Union N106
1 x N8 lock
FINISH Battleship Grey
CLEAR OPENING 1900 H x 500 W
WALL OPENING 1965 H x 665 W
WEIGHT 225 kg
28
34. The National Staff Security Door is designed to protect staff and other valuables against armed and other forcible
attack. It is ideally suited to give protection to pay- and cashiers offices where large sums of money are handled.
Doors not recommended for external use for internal use only.
The door is made of 100mm x 50mm steel tubing and is finished in black undercoat.
Door is fitted with a conti roton hinge.
The door panel is 440mm thick and consists of 6mm steel plate and wood laminations
of more than 40mm. Both inside and outside door surfaces are finished in an
attractive sapele or oak veneer, depending on availability, which is clear lacquered. A
500 x 300mm bullet resistant view panel is provided and a pull handle is fitted to both
sides of the door.
The door and frame must be installed as a unit and should also be installed so
that it opens outwards against the attack.
A high security mortice dead lock with latch is fitted and duplicate keys are
obtainable only from the factory. (Other locking can be supplied if required)
A heavy duty Hydraulic Door closer with access control by means of a digital
keypad release or push button release can be fitted optionally.
The Staff Security/Anti Bandit door, can be supplied in G1, G2 or G3 rating
• An additional 65 mm must be added to the depth to allow for the handle & hinges
• As our policy is one of constant improvement, we reserve the right to alter this specification.
DIMENSIONS
OVERALL FRAME HEIGHT 2 100mm
OVERALL FRAME WIDTH 930mm
WALL OPENING (Height) 2 110mm
WALL OPENING (Width) 940mm
MASS 180 Kg Approx.
BARRIER G1 – 38mm - 3mm Mild steel Resistant to 9mm handgun
G2 – 38mm - 5mm Mild Steel Resistant to 357. Magnum & 12g shotgun
G3 – 53mm - Armox Plate Resistant to AK47 excluding NATO
30
35. The NATAIR 2 system is an air tube system capable of both sending and receiving carriers. Single direction is also available. The
standard mode of operation is manual.
To send a carrier, open the slide sleeve and insert the carrier into slide sleeve station and press the push button. The carrier is then
immediately sucked or blown along from one end of the tube to the other.
The carrier is moved by the flow of air and reaches a velocity of 5-7 metres per second. Higher speeds are available, by using
larger blowers. As soon as the carrier reaches its destination, the controller automatically turns off the blower. When needed, the
arrival of the carrier can be indicated by means of an acoustical and visual signal. The length of tubing that can be used is virtually
endless and can be mounted indoors as well as outdoors.
If the tube is cut, the system no longer functions as the airflow to move the carrier is no longer available. This consequently offers a
safe, secure and speedy means of moving valuables, money or items from one point to another
There are also many different sizes of tubing available and sizes range from 90mm to 160mm in diameter. The tube and carrier size
depends on what the weight and size of the object is that is to be carried. The standard sizes are 110mm and 160mm diameter.
POINT TO POINT
The standard slide sleeve control panel has a push button and indicating pilot lights to
show when the system is busy sending
or receiving carriers. Many configurations of stations are available. The type depends
on the clients specific requirements. Some of the standard configurations for a point
to point system would be; Slide sleeve to slide sleeve, both sending and receiving.
1. Slide sleeve to slide sleeve, single direction
2. Open end to slide sleeve, single direction
3. Slide sleeve into a safe or secure enclosure, single direction
4. Slide sleeve to treasury station, both directions
MULTI POINT
Where many points are required to be able to send to each other or to a central station, diverters are used to route capsules to and
from the required points.
The carriers are in fact the containers in which the objects are transported. They are made of an impact resistant plastic and fitted with
baring rings made of a soft material. These rings ensure that the movement of the carriers is silent and efficient. The baring rings also
provide and airtight fitting for the carrier in the tubing, thus ensuring an efficient use of airglow and enabling relatively large weights to
be transported.
The carrier can be fitted with screw caps or swivel caps depending on the type of carrier used. Sometimes the choice of carriers is
limited by the diameter of pipe being used. The dimensions of the carrier also determine the diameter of the tubing and the radius of
the bends.
31
36. National Deposit Safes are designed to provide security against hold-ups and robberies. No tins, pouches
or other containers are required (but may be used), cash and individual single notes may be deposited as
required without waiting to fill separate containers. A non-return device is fitted to the deposit mechanism to
prevent “fishing out”. The inner door is secured by a 7-lever unpickable safe lock.
SLIMLINE ROLLTOP
MODEL
SIZE – OUTSIDE
(mm) H X W X D
CHUTE (mm)
H X W X D
MASS (KG)
APPROX
LOCKING
Roll Top 395 x 205 x 205 60 x 50 x 90 14
1 X Keylock
Keys in duplicate
Slimline Safe 265 x 340 x 120 80 x 260 x 45 10
1 x Keylock
Keys in duplicate
32
37. DIGITAL ELECTRONIC SAFE
SUITABLE FOR LAPTOPS
EXTERNAL SIZES 200H X 450W X 400D
INTERNAL SIZE 190H X 440W X 350D
FINISH Black or White
WEIGHT 12 kg
LOCKING Digital Electronic Lock with LCD display panel with
manual key override.
OPERATIONS Operates with two sets of 3 to 8 digit codes, Battery
operated - no external power supply needed. 4 AA
Batteries included.
33
38. All National Wall safes are made from the finest 3mm steel and are bent or welded to
form a secure unit, with fixing holes in the back for bolting to the wall. Safes can also
be built into walls if so desired.
The door is fitted with special concealed hinges for added security and is manufactured
from 6mm steel
A 7-Lever key lock securing the door is fitted as standard with keys in duplicate
An attractive and durable paint is applied
A 3 wheel Combination lock or Digital can be fitted in
place of the key lock if required.
TYPES OF WALL SAFES AVAILABLE
MEDIUM DUTY BODY 3 mm DOOR 6 mm
Model NSW – WS 1 NSW- WS 2 NSW – WS 3
Size ( outside mm H x W X D) 300 x 300 x 200 300 x 400 x 250 300 x 500 x 300
Inside Fittings 1 Shelf 1 Shelf 1 Shelf
Mass KG (approx) 15 21 26
34
39. BODY All Gun lockers are configured vertically or horizontally as required, by the client
and can be manufactured in modular form.
The door is of 6mm and body 3mm steel
Each door (box) is fitted with dual control 7 lever locks. These locks are
easily removable/replaceable when the door is open, if keys are misplaced.
There are 2 keys per box, plus 2 “Guard-Keys” per unit. The “Guard-key”
fits all doors in the unit. The individual keys are all different. Single locks
can also be supplied, if the “Guard-Key” system is not required.
A durable and attractive paint finish is applied
H 100mm x W 300mm x D 200mm
35
40. SABS SANS 953 – 1 Certified
The body is bent up from a single piece of steel 3mm
thick to make up the back and sides. Other components
are welded by continuous weld and a 10mm square
rebate bar reinforces the body structure.
The doorplate is 6mm thick and includes 3 sliding bolts
with 3 fixed bolts at the back engaging behind rebate
bars.
Sliding bolts are secured by a 7-lever pick resistant lock
with duplicate keys. A keyless combination lock or digi
lock can be fitted as an optional extra.
Gun racks are provided with foam rubber to protect rifle
barrels and foam plastic is used at the back to protect
butts.
Provision is made for bolting to a floor and wall.
MODEL NSR-RS03 NSR-RS05 NSR-RS06 NSR-RS08 NSR-RS10
Capacity 3 Gun 5 Gun 6 Gun 8 Gun 10 Gun
Size H x W x D
(outside) (mm) 1 300 x 295 x 290 1 300 x 370 x 360 1 300 x 370 x 360 1 300 x 500 x 445 1 300 x 500 x 445
Fittings 3 Rifles with
shelves for ammo
5 Rifles with
Shelves for ammo
6 Rifles with
Shelves for ammo
8 Rifles with
Shelves for ammo
10 Rifles with
Shelves for ammo
Mass Kg (Approx) 56 72 72 94 94
36
41. The 4 drawer cabinet is constructed with special space age fire resisting
material of low density and immense strength
All drawers are designed with a special tongue and groove profile to
provide protection against fumes and hot gasses. Each operates
independently and incorporates an automatic latch for quick fool proof
emergency closure. If one drawer is left open the others are protected
Each drawer is fitted with its own individual keylock with keys in duplicate.
The top drawer is fitted with a combination lock
All drawers are hung on precision suspension slides and
catches operate at a finger touch. A attractable paint
finish is applied
MODEL DATAGUARD FILE
Size (outside in mm) H x W x D 1 550 x 530 x 755
Size (inside drawers in mm) H x W x D 240 x 380 x 600
Weight 375kgs
Accessory 8 dividers
37
42. SABS Specification 951-1990 Group One
Designed to afford strong protection against burglary and fire. Economically priced
to bring security Within easy reach of even the smallest business concern and
householder. Tested in accordance With SABS Specification 951 – 1990 Group 1
for Fire-Resistant record protection Equipment. This range passed the 30 minute
test at temperatures in excess of 800ºC
The overall thickness is 78mm incorporating a main outer plate of 8mm solid
steel. A hardened drill-resisting plate protects the lock. Heavy sliding steel bolts
25mm in diameter are provided at the front edge of the door with fixed bolts at the
back. The door is hung on steel hinges
A 7-lever SABS approved keylock is provided with keys
in duplicate. A keyless combination or digi lock can be
fitted as an optional extra
Heavy quality stainless steel finished fittings are used.
Shelves, where fitted, are removable. A durable and
attractive paint finish is applied
MODEL NS-OQ1 NS-OQ2 NS-OQ3 NS-OQ4 NS-OQ5
Size H x W x D
(outside in mm) 510 x 435 x 410 625 x 530 x 520 775 x 580 x 560 940 x630 x595 1200 x740 x640
Size H x W x D
(inside in mm) 420 x 320 x 270 520 x420 x380 670 x 475 x 440 830 x 520 x 450 1100 x 640 x 480
Inside Fittings
1 Shelf
Bolting down
Facility
1 Shelf
1 Drawer
Bolting down
Facility
Optional Extra:
Lockable drawer
1 Shelf
1 Drawer
Bolting down
facility
Optional Extra:
Lockable drawer
2 Shelves
1 Drawer
Optional Extra:
Lockable drawer
2 Shelves
1 Drawer
Optional Extra:
Lockable drawer
Mass (Kg) 208 252 300 404 485
Volume ( ℓ) 36 80 130 195 338
38
43. SABS Specification 751-1997 Category One
The overall thickness is 50mm. The inner and outer bodies are electrically
welded. In keeping with modern security practice the toughest barrier material is
used between the inner and outer bodies
The overall thickness is 80mm incorporating a main outer plate of 10mm solid steel.
A hardened Steel 3mm drill-resisting plate is fitted behind the lock. Sliding bolts,
25mm in diameter are provided at the front edge of the door with fixed bolts at the
back. The door is hung on steel hinges. The bottom hinge is provided with a ball-
bearing for ease of operation
One 7-lever SABS approved keylock is provided with keys in
duplicate. Other locking options are available such as
combination, digi or a 2nd keylock, as optional extra
Heavy quality stainless steel finished fittings are used.
Shelves, where fitted, are removable. A durable and
attractive paint finish is applied
MODEL NS1-036 NS1-080 NS1-130 NS1-200 NS1-330
Size H x W x D
(outside in mm) 510 x 435 x 410 625 x 530 x 520 775 x 580 x 560 940 x630 x595 1200 x740 x640
Size H x W x D
(inside in mm) 420 x320 x 270 520 x420 x 380 670 x 475 x 440 830 x 520 x 450 1100 x 640 x 480
Inside Fittings 1 Shelf
Bolting down
Facility
1 Shelf
Bolting down
facility
1 Shelf
Bolting down
facility
2 Shelves 2 Shelves
Mass (Kg) 210 262 310 410 650
Volume ( ℓ) 36 80 130 200 330
39
44. SABS Specification 751-1997 Category Two
The overall thickness is 50mm the inner and outer bodies are electrically welded.
In keeping with modern security practice the toughest barrier material is used
between the inner and outer bodies
The overall thickness is 90mm incorporating a main outer plate of 20mm solid
steel. A hardened drill-resisting plate protects the lock. Heavy sliding steel bolts
25mm in diameter are provided at the front edge of the door with fixed bolts at
the back. The door is hung on steel hinges. The bottom hinge is provided with a
ball-bearing for ease of operation
Two 7 - lever SABS approved keylocks are provided with keys
in duplicate
Heavy quality stainless steel finished fittings are used.
Shelves, where fitted, are removable. A durable and
attractive paint finish is applied
MODEL NS2-036 NS2-080 NS2-130 NS2-200 NS2-330
Size H x W x D
(outside in mm) 510 x 435 x 410 625 x 530 x 520 775 x 580 x 560 940 x 630 x 595 1 200 x 740 x 640
Size H x W x D
(inside in mm) 420 x 320 x 270 520 x 420 x 380 670 x 475 x 440 830 x 520 x 450 1 100 x 640 x 480
Inside Fittings 1 Shelf
Bolting down
facility
1 Shelf 1 Shelf 1 Shelf 2 Shelves
Mass (Kg) 220 282 320 420 670
Volume ( ℓ) 36 80 130 200 330
40
45. SABS Specification 751-1997 Category Two ADM
The overall thickness is 100mm with a special barrier material between the inner
and outer body plates to prevent penetration by abrasive disc-grinders
The door has an overall thickness of 170mm with an outer slab over 90mm in
thickness with special barrier material to prevent penetration by abrasive disc-
grinder attack. Heavy sliding steel bolt of 32mm in diameter are provided at the
front edge of the door with fixed bolts at the back. The bottom hinge is provided
with a ball-bearing for ease of operation
Two 7 - lever SABS approved keylocks are provided with
keys in duplicate. A remote re-locking device protecting
the locking mechanism against explosive, drilling and
other forms of attack. Other locking options are available
such as combination or digi lock as optional extras
Heavy quality stainless steel finished fittings are used.
Shelves, where fitted, are fixed. A durable and attractive
paint finish is applied
MODEL NS2ADM-033 NS2ADM-070 NS2ADM-140 NS2ADM-200 NSADM-280 NS2ADM-330
Size H x W x D
(outside in mm) 660 x 500 x 530 720 x 580 x 645 795 x 710 x 750 1 050 x 710 x 755 1 400 x 710 x 755 1 600 x 710 x 755
Size H x W x D
(inside in mm) 450 x 300 x 240 520 x 380 x 350 600 x 510 x 460 850 x 510 x 460 1 200 x 510 x 460 1 400 x 510 x 460
Inside Fittings 1 Shelf
Bolting down
facility
1 Shelf 1 Shelf 1Shelves 3 Shelves 3 Shelves
Mass (Kg) 347 518 726 942 1157 1372
Volume ( ℓ) 33 70 140 200 280 330
41
46. SABS Specification 751-1997 Category Two ADM
The overall thickness is 100mm with a special barrier material between the inner and
outer body plates to prevent penetration by hand tools and abrasive disc-grinder
attack
The door has on overall thickness of 180mm with an outer slab of 90mm in
thickness with a special barrier material to prevent penetration by hand tools and
abrasive disc- grinder attack. Heavy sliding steel bolts of 32mm in diameter are
provided at the front edge of the door with fixed bolts at the back. The bottom hinge
is provided with a ball-bearing for ease of operation
The 90mm drawer trap is accessed from the front of the
safe. The drawer can then be pulled open which allows
the responsible person to deposit cash into the safe. The
drawer is supplied with a keylock. The drop drawer has
been tested and approved by the SABS for fishing and
strength
Two 7 – lever SABS approved keylocks are provided with
keys in duplicate. A re-locking device protecting the locking
mechanism against explosive, drilling and other forms of
attack is fitted. Other locking options are available such as
combination or digi lock as optional extras
Heavy quality stainless steel finished fittings are used. Shelves, where fitted, are
adjustable. A durable and attractive paint finish is applied
MODEL NS2ADM-025-FF NS2ADM-070-FF NS2ADM-140-FF
Size (outside in mm) H x W x D 806 x 500 x 532 980 x 580 x 645 1 050 x 710 x 755
Size (internal in mm) H x W x D 350 x 300 x 240 520 x 380 x 350 600 x 510 x 460
Drop drawer size (internal) H x W x D 100 x 200 x 200 100 x 200 x 200 100 x 200 x 200
Mass (Kg) approximately 457 720 832
Volume (ℓ) 25 70 140
42
47. SABS Specification 751-1997 Category Two
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinders
The door has an overall thickness of 180mm with an outer slab over 90mm in thickness with
special barrier material to prevent penetration by hand tools and abrasive disc-grinder
attack. Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the
door with fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease of
operation
The 90mm thick drawer trap must be accessed from the back of
the safe. The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with a 7 - lever keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 - lever SABS approved keylocks are provided with keys
in duplicate. A re-locking device protecting the locking
mechanism against explosive, drilling and other forms of attack
is fitted. Other locking options are available such as
combination or digi lock as optional extras
Heavy quality stainless steel finished fittings are used. Shelves, where fitted, are removable.
A durable and attractive paint finish is applied
MODEL NS2ADM-025-RE NS2ADM-070-RE NS2ADM-140-RE
Size H x W x D
(outside in mm) 806 x 500 x 532 980 x 580 x 645 1 050 x 710 x 755
Total Depth 772 885 995
Size H x W x D
(inside in mm)
350 x 300 x 240 520 x 380 x 350 600 x 510 x 460
Drop Drawer Size 100 x 200 x 200 100 x 200 x 200 100 x 200 x 200
Mass (Kg) 547 812 1 090
Volume ( ℓ) 25 70 140
43
48. SABS Specification 751-1997 Category Three
The overall thickness is 100mm. The inner and outer bodies are electrically welded. In
keeping with modern security practice the toughest barrier material is used between the
inner and outer bodies. This construction is designed to withstand hand tools, disc-grinders
and oxy-acetylene
The overall thickness is 180mm incorporating an outer slab of 90mm comprising of
material of the highest drill, explosive and oxy-acetylene resistant materials. Heavy steel
sliding bolts, 32mm in diameter are provided to
protect against wedge attack on the front edge with fixed bolts
at the back. The door is hung on heavy-duty steel hinges, both
provided with ball bearings for easy operation
Two 7 - lever SABS approved keylocks are provided with keys
in duplicate. Both locks are protected by glass emergency re-
locking devices, automatically deadlocking the boltwork if a lock
is attacked by explosives, drilling and other forms of attack.
Other locking options are available such as combination or digi
lock, as optional extra
Heavy quality stainless steel finished fittings are used. Shelves,
where fitted, are removable. A durable and attractive paint finish is
applied
MODEL NS3-033 NS3-070 NS3-140 NS3-200 NS3-280 NS3-330
Size H x W x D
(outside in mm) 650 x 500 x 530 720 x 580 x 645 795 x 710 x 755 1 050 x 710 x 755 1 400 x 710 x 755 1 600 x 710 x 755
Size H x W x D
(inside in mm) 450 x 300 x 240 520 x 380 x 350 600 x 510 x 460 850 x 510 x 460 1 200 x 510 x 460 1 400 x 510 x 460
Inside Fittings 1 Shelf
Bolting down
facility
1 Shelf 1 Shelf 1Shelves 3 Shelves 3 Shelves
Mass (Kg) 357 520 736 915 1 167 1 382
Volume ( ℓ) 33 70 140 200 280 330
44
49. SABS Specification 751-1997 Category Three
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinder attack
The door has on overall thickness of 180mm with an outer slab of 90mm in thickness with a
special barrier material to prevent penetration by hand tools and abrasive disc- grinder attack.
Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the door with
fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease of operation
The 90mm drawer trap is accessed from the front of the safe.
The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with or without a keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 – lever SABS approved keylocks are provided with keys in
duplicate. A re-locking device protecting the locking mechanism
against explosive, drilling and other forms of attack is fitted. Other
locking options are available such as combination or digi lock as
optional extras
Heavy quality stainless steel finished fittings are used. Shelves, where
fitted, are adjustable. A durable and attractive paint finish is applied
MODEL NS3-025-FF NS3-070-FF NS3-140-FF
Size H x W x D
(outside in mm) 806 x 500 x 532 980 x 580 x 645 1050 x 710 x 755
Size H x W x D
(inside mm) 350 x 300 x 240 520 x 380 x 350 600 x 510 x 460
Drop drawer size (internal) H x W x D 100 x 200 x 200 100 x 200 x 200 100 x 200 x 200
Mass (Kg) approx 466 730 842
Volume ( ℓ) 25 70 140
45
50. SABS Specification 751-1997 Category Three
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinders
The door has an overall thickness of 180mm with an outer slab over 90mm in thickness with
special barrier material to prevent penetration by hand tools and abrasive disc-grinder attack.
Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the door with
fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease of operation
The 90mm thick drawer trap must be accessed from the back of
the safe. The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with a 7 - lever keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 - lever SABS approved keylocks are provided with keys in
duplicate. A re-locking device protecting the locking mechanism
against explosive, drilling and other forms of attack is fitted.
Other locking options are available such as combination or digi
lock as optional extras.
Heavy quality stainless steel finished fittings are used. A
durable and attractive paint finish is applied
MODEL NS3-025-RE NS3-070-RE NS3-140-RE
Size H x W x D
(outside in mm) 806 x 500 x 532 980 x 580 x 645 1 050 x 710 x 755
Total Depth 772 885 995
Size H x W x D
(inside in mm) 350 x 300 x 240 520 x 380 x 350 600 x 510 x 460
Drop Drawer Size 100 x 200 x 200 100 x 200 x 200 100 x 200 x 200
Mass (Kg) 567 832 1090
Volume ( ℓ) 25 70 140
46
51. SABS Specification 751-1997 Category Four
The overall thickness is 100mm. The inner and outer bodies are electrically welded. In
keeping with modern security practice the toughest barrier material is used between
the inner and outer bodies. This construction is designed to withstand hand tools,
disc-grinders, oxy-acetylene and oxy-arc
The overall thickness is 180mm incorporating a main outer plate of 90mm
comprising of material of the highest drill, explosive, disc-grinders,
oxy-acetylene and oxy-arc resistant materials. Heavy steel
sliding bolts, 32mm in diameter are provided to protect against
a wedge attack on the front edge with fixed bolts at the back.
The door is hung on heavy-duty steel hinges, both provided
with ball-bearings for easy operation solid steel
Two 8-lever keylocks are provided with keys in duplicate.
Locks operate multiple emergency re-locking devices,
automatically deadlocking the boltwork if a lock is
attacked by explosives and other forms of attack. Other
locking options are available as optional extras
Heavy quality stainless steel finished fittings are used. Shelves, where fitted, are
adjustable. A durable and attractive paint finish is applied
MODEL NS4-070 NS4-140 NS4-200 NS4-280 NS4-330
Size H x W x D
(outside in mm) 720 x 580 x 645 795 x 710 x 755 1050 x710 x 755 1400 x 710 x 755 1600 x 710 x 755
Size H x W x D
(inside in mm) 520 x 380 x 350 595 x 510 x 460 850 x 510 x 460 1200 x 510 x 460 1400 x 510 x 460
Inside Fittings 1 Shelf 1 Shelf 1 Shelf 3 Shelves 3 Shelves
Mass (Kg) 528 736 961 1 167 1382
Volume ( ℓ) 70 140 200 280 330
47
52. SABS Specification 751-1997 Category Four
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinder attack.
The door has on overall thickness of 190mm with an outer slab of 110mm in thickness with
a special barrier material to prevent penetration by hand tools and abrasive disc- grinder
attack. Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the
door with fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease
of operation.
The 90mm drawer trap is accessed from the front of the safe.
The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with or without a keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 – lever SABS approved keylocks are provided with keys
in duplicate. A re-locking device protecting the locking
mechanism against explosive, drilling and other forms of attack
is fitted. Other locking options are available such as
combination or digi lock as optional extras
A durable and attractive paint finish is applied. Heavy quality stainless steel finished fittings
are used. A durable and attractive paint finish is applied
MODEL NS4-070-FF NS4-140-FF
Size H x W x D
(outside in mm) 980 x 580 x 645 1050 x 710 x 755
Size H x W x D
(inside mm) 520 x 380 x 350 600 x 510 x 460
Drop drawer size (internal) H x W x D 100 x 200 x 200 100 x 200 x 200
Mass (Kg) approx 740 852
Volume ( ℓ) 70 140
48
53. SABS Specification 751-1997 Category Four
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinders
The door has an overall thickness of 180mm with an outer slab over 90mm in thickness with
special barrier material to prevent penetration by hand tools and abrasive disc-grinder
attack. Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the
door with fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease of
operation
The 90mm thick drawer trap must be accessed from the back of
the safe. The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with a 7 - lever keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 - lever SABS approved keylocks are provided with keys
in duplicate. A re-locking device protecting the locking
mechanism against explosive, drilling and other forms of attack
is fitted. Other locking options are available such as
combination or digi lock as optional extras
Heavy quality stainless steel finished fittings are used. A
durable and attractive paint finish is applied
MODEL NS4-070-RE NS4-140-RE
Size H x W x D
(outside in mm) 980 x 580 x 645 1 050 x 710 x 755
Total Depth 885 995
Size H x W x D
(inside in mm) 520 x 380 x 350 600 x 510 x 460
Drop Drawer Size 100 x 200 x 200 100 x 200 x 200
Mass (Kg) 832 1090
Volume ( ℓ) 70 140
49
54. SABS Specification 751-1997 Category Five
The overall thickness is 100mm. The inner and outer bodies are electrically welded.
In keeping with modern security practice the toughest barrier material is used between
the inner and outer bodies. This construction is designed to with stand hand tools,
disc-grinders, oxy-acetylene diamond core drill and impact drill
The overall thickness is 180mm incorporating an outer slab of 110mm comprising
material of the highest drill, explosive, disc-grinders, oxy-acetylene and oxy-arc
resistant materials. Heavy steel sliding bolts 32mm in diameter are provided to
protect against a wedge attack on the front edge with fixed bolt at the back. The door
is hung on heavy-duty, steel hinges, both provided with ball-bearings for easy
operation
One 4-wheel combination lock and two 7-lever keylocks are
provided with keys in duplicate. Locks operate multiple
emergency re-locking devices automatically dead locking the
boltwork if a lock is attacked by explosives and other forms of
attack. Other locking options are available as optional extras.
Heavy quality stainless steel finished fittings are used. Shelves, where fitted, are
removable. A durable and attractive paint finish is applied
MODEL NS5-070 NS5-140 NS5-200 NS5-280 NS5-330
Size H x W x D
(outside in mm) 720 x 580 x 645 795 x 710 x 755 1050 x 710 x 755 1 400 x 710 x 755 1 600 x 710 x 755
Size H x W x D
(inside in mm) 520 x 380 x 350 595 x 510 x 460 850 x 510 x 460 1 200 x 510 x 460 1 400 x 510 x 460
Inside Fittings 1 Shelf 1 Shelf 1 Shelf 3 Shelves 3 Shelves
Mass (Kg) 538 746 962 1 177 1392
Volume ( ℓ) 70 140 200 280 330
50
55. SABS Specification 751-1997 Category Five
The overall thickness is 100mm with a special barrier material between the inner and
outer body plates to prevent penetration by hand tools and abrasive disc-grinder attack
The door has on overall thickness of 180mm with an outer slab of 90mm in thickness
with a special barrier material to prevent penetration by hand tools and abrasive disc-
grinder attack. Heavy sliding steel bolts of 32mm in diameter
are provided at the front edge of the door with fixed bolts at the
back. The bottom hinge is provided with a ball-bearing for ease
of operation
The 90mm drawer trap is accessed from the front of the safe.
The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with or without a keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
One combination lock and two 7 – lever SABS approved
keylocks are provided with keys in duplicate. A re-locking
device protecting the locking mechanism against explosive,
drilling and other forms of attack is fitted. Other locking options
are available such as combination or digi lock as optional extras
Heavy quality stainless steel finished fittings are used. A durable and attractive paint
finish is applied
MODEL NS5-070-FF NS5-140-FF
Size H x W x D
(outside in mm) 980 x 580 x 645 1050 x 710 x 755
Size H x W x D
(inside mm) 520 x 380 x 350 600 x 510 x 460
Drop drawer size (internal) H x W x D 100 x 200 x 200 100 x 200 x 200
Mass (Kg) approx 750 862
Volume ( ℓ) 70 140
51
56. SABS Specification 751-1997 Category Five
The overall thickness is 100mm with a special barrier material between the inner and outer
body plates to prevent penetration by hand tools and abrasive disc-grinders
The door has an overall thickness of 180mm with an outer slab over 90mm in thickness with
special barrier material to prevent penetration by hand tools and abrasive disc-grinder attack.
Heavy sliding steel bolts of 32mm in diameter are provided at the front edge of the door with
fixed bolts at the back. The bottom hinge is provided with a ball-bearing for ease of operation
The 90mm thick drawer trap must be accessed from the back of
the safe. The drawer can then be pulled open which allows the
responsible person to deposit cash into the safe. The drawer is
supplied with a 7 - lever keylock. The drop drawer has been
tested and approved by the SABS for fishing and strength
Two 7 - lever SABS approved keylocks are provided with keys in
duplicate. A re-locking device protecting the locking mechanism
against explosive, drilling and other forms of attack is fitted. Other
locking options are available such as combination or digi lock as
optional extras
Heavy quality stainless steel finished fittings are used. A durable and attractive paint finish is
applied
MODEL NS5-070-RE NS5-140-RE
Size H x W x D
(outside in mm) 980 x 580 x 645 1 050 x 710 x 755
Total Depth 885 995
Size H x W x D
(inside in mm) 520 x 380 x 350 600 x 510 x 460
Drop Drawer Size 100 x 200 x 200 100 x 200 x 200
Mass (Kg) 852 1110
Volume ( ℓ) 70 140
52
57. RATINGS Category 2 ADM, 3 AND 4
FINISH Battleship Grey or Dry Gold
EXTERNAL SIZES 750H x 1023W x 705D
WEIGHT ± 520 kg
INSIDE FITTINGS 2 X Fixed shelves (other options available)
LOCKING 2 x 7 – lever keys locks
VOLUME 132lt
53
58. CATEGORIES Category 2 ADM and Category 3
FINISH Battleship Grey
EXTERNAL SIZES 1000H x 500W x 500D
WEIGHT ± 500 kg
BODY Category 2 ADM or Category 3 barrier
LOCKING 4 x 7 – lever keys locks (2 on top door and 2 on bottom
door). 1 x 7 – level key lock on lockable compartment.
54
59. INTRODUCTION TO CITI-
TRACK
CiTi-Track is a comprehensive range of solutions covering all aspects of Cash Protection, Cash in Transit
and Cash control. CiTi-Track time delay/access controllers are designed specifically for controlling access to
high security areas such as bulk cash centres, vaults, safes and ATM’s. They are highly programmable and
can be programmed to work in almost any application required. There are 3 models to choose and build
from:
CiTi-Track Protecta
CiTi-Track Defenda
CiTi-Track Extreme
INTERLOCK CONTROL
CiTi-Track time delays combine full time delay features and access control of interlocking doors normally
associated with access to secure areas. 2 and 3 door interlock control comes as standard
SEISMIC SENSING
All CiTi-Track time delay locks are fitted standard with Seismic Sensing and alarm outputs Siesmic sensing
is enabled automatically when locks enter time lock or holiday lock mode.
CASH IN TRANSIT
INTEGRATION AND
KEYLESS SAFES
All time delays feature a CIT opening facility to reduce risk during CIT services. All CiTi-Track time delay
are fully integrated with our range of cash in transit cross pavement products (CPC’s) and incorporate a CPC
interface which allows the time delay and the CPC to interact with each other to give advanced features and
benefits to you during CIT services. This allows for full keyless functionality.
CITI-TRACK TAMPER
EVIDENT BAG TRACKING
SYSTEM
CiTi-Track Extreme offers a barcode reader connection to start tracking your bags internally during the day’s
cash up. All bags are scanned and recorded during the day’s drops and this information is relayed to your
CIT service provider to facilitate a quick and efficient CIT service and internal process control and audits.
55
60. CATEGORIES Category 2 ADM, 3, 4 and 5
FINISH Battleship Grey
EXTERNAL SIZES 1600H x 710W x 755D
WEIGHT ± 1500 kg
LOCKING 3 x Key locks per door with keys in duplicate – key
retaining. Other locking options available.
INTERNAL
FITTINGS
Top door: 1 x fixed shelf and drop drawer
Bottom door: No fittings
56
61. CONSTRUCTION 3mm Body
6mm Door
INSIDE FITTINGS
4 X Fixed shelves (middle)
LOCKING 2 x Key locks per door with keys in duplicate
EXTERNAL
DIMENSIONS
H1670 X W910 X D610
BOLTWORK 3 x Locking bolts on each door (not displayed on picture)
57
62. EXTERNAL SIZES 200H X 310W X 200D
WEIGHT 9 kg
LOCKING Battery operated with Manual key override
58
63. Product list
Safes
Drop Safes
Strongroom / Record
Room doors
Demountable Vaults
Fire Resisting Cabinets
Hotel Safes
Rifle and Hand Gun Safes
Anti Bandit Doors
Blast Resistant Doors
Bullet Resistant
Observation
Pay Windows
Cash Transfer Units
Cash in Transit Safes
Time Delay and Time Lock
AIR-TUBE systems for the
banking industry and
Commercial sector
Mantraps and Booths
Automation of bulk cash
centres
(automation and
Interlocking of all doors,
vault,
Roller shutter, staff, client
service, vehicle etc)
Shop fitting including
Teller screening
with BRG and pay
windows
www.nationalsafe.co.za
sales@nationalsafe.co.za
Accreditation
National Safe is accredited to the following
organizations/institutions:
• Credited to the SABS with
ISO9001:2008 (Registration No LS0974/L54711)
• Member of the Locksmiths Association
of South Africa (LASA)
• Member of the South African
Security Association (SASA)
• Member of the Association of Security
Engineering in South Africa (ASESA)
• Denis Austen is a past technical
committee member of the SABS for
safes and physical security equipment.
• Neville Austen is a past National
Treasurer and Gauteng area Chairman
of LASA.
As our policy is one of constant improvement, we reserve the right to alter the specifications without notice
64. Johannesburg Cape Town
Head Office Electron street
451 Bergvlei Road Stikland
Wadeville Belville
Germiston Phone
1401 +27 21 948-0730
Phone Fax
+27 11 902-4108 +27 21 946-4037
Fax
+27 11 902-5009
Durban
Phone
+27 080 628-7233
Fax
+27 086 624-9521
Email
Please feel free to email
us should u have any questions
sales@nationalsafe.co.za or
gavin@nationalsafecpt.co.za
(Cape Town sales)
Visit our website
www.nationalsafe.co.za