1. Publication list
1. C.L. Qiu,N.J.E. Adkins, H. Hassanin, M.M. Attallah, K. Essa. In-situ shelling via selective laser
melting: modelling and microstructural characterisation. Materials and Design. 2015, vol. 87, pp.
845-853.
2. C.L. Qiu*, C. Panwisawas,M. Ward,H.C. Basoalto, J.W. Brooks, M.M. Attallah. On the role of
melt flow into the surface structure and porosity development during selective laser melting. Acta
Materialia. 2015, vol. 96, pp. 72-79.
3. C.L. Qiu,G.A. Ravi, M.M. Attallah. Microstructural Control during Direct Laser Deposition of a
-Titanium Alloy (Ti5553). Materials and Design. 2015,vol. 81, pp. 21-30.
4. C. Panwisawas, C.L. Qiu,Y. Sovani, J.W. Brooks, M.M. Attallah, H.C. Basoalto. On the role of
thermal fluid dynamics into the evolution of porosity during selective laser melting. Scripta
Materialia. 2015, vol. 105, pp. 14-17.
5. C.L. Qiu, Y. Sheng, N.J.E. Adkins, M. Ward, H. Hassanin, M.M. Attallah, P.D. Lee,P.J. Withers.
Influence of processing conditions on strut structure and compressive property of cellular lattice
structures fabricated by selective laser melting. Materials Science and Engineering A. 2015,vol.
628, pp. 188–197.
6. C.L. Qiu,G.A. Ravi, C. Dance,A. Ranson, S. Dilworth, M.M. Attallah. Fabrication of large Ti-
6Al-4V structures by direct laser deposition. Journal of Alloys and Compounds. 2015, vol. 629,
pp. 351-361.
7. C.L. Qiu, N.J.E. Adkins, M.M. Attallah. Microstructure and tensile properties of laser-melted and
of HIPed laser-melted Ti-6Al-4V. Materials Science and Engineering A. 2013, vol. 578, pp. 230-
239.
8. C.L. Qiu*, X.H. Wu. High cycle fatigue and fracture behaviour of a hot isostatically
pressed nickel-based superalloy. Philosophical Magazine. 2013. Published on line:
http://dx.doi.org/10.1080/14786435.2013.852287
9. C.L. Qiu, X.H. Wu, J.F. Mei, P. Andrews, W. Voice. Influence of heat treatment on
microstructure and tensile properties of a hot isostatically pressed nickel-based superalloy. Journal
of Alloys and Compounds. 2013, vol. 578, pp.454-464.
10. Z.W. Wu, C.L. Qiu, V. Venkatesh, H. Fraser, R. Williams, G.B. Viswanathan, M. Thomas,
S. Nag, R. Banerjee, M.H. Loretto. The Influence of Precipitation of Alpha2 on Properties and
Microstructure in TIMETAL 6-4. Metallurgical and Materials Transactions A. 2013, vol. 44,
pp.1706-1713.

2. 11. C.L. Qiu, P. Andrews. On the formation of irregular-shaped gamma prime and serrated grain
boundaries in a nickel-based superalloy during continuous cooling. Materials Characterization.
2013, vol. 76, pp. 28-34.
12. C.L. Qiu, M.M. Attallah, X.H. Wu, P. Andrews. Influence of hot isostatic pressing
temperature on microstructure and tensile properties of a nickel-based superalloy powder.
Materials Science and Engineering A. 2013, vol. 564, pp. 176-185.
13. L. Liu, C.L. Qiu, C.Y. Huang, Y. Yu, H. Huang, S.M. Zhang. Biocompatibility of Ni-free Zr-
based bulk metallic glasses. Intermetallics. 2009, vol. 17, pp. 235–240.
14. L. Liu, C.L. Qiu, Q. Chen, K.C. Chan, S.M. Zhang. Deformation behaviour, corrosion
resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses. Journal of Biomedical
Materials Research - Part A. 2008, vol.86, no. 1, pp.1160-169.
15. L. Liu, K.C. Chan, C.L. Qiu, Q. Chen. Formation and biocompatibility of Ni-Free
Zr60Nb5Cu20Fe5Al10 bulk metallic glass. Materials Transactions. 2007, vol. 48, no. 07, pp.1879-
1882.
16. L. Liu, C.L. Qiu, M. Sun, Q. Chen, K.C. Chan, G.K.H. Pang. Improvements in the plasticity
and biocompatibility of Zr-Cu-Ni-Al bulk metallic glass by the micro-alloying of Nb. Materials
Science and Engineering A. 2007, vol. 448-451, pp. 193-197.
17. C.L. Qiu, Q. Chen, L. Liu, K.C. Chan, J.X. Zhou, P.P. Chen, S.M. Zhang. A novel Ni-free Zr-
based bulk metallic glass with enhanced plasticity and good biocompatibility. Scripta Materialia,
2006, vol. 55, no. 07, pp. 605-608.
18. L. Liu, C.L. Qiu, Q. Chen, S.M. Zhang. Corrosion behaviour of Zr-based bulk metallic glasses
in different artificial body fluids. Journal of Alloys and Compounds. 2006, vol. 425, no. 1-2, pp.
268-73.
19. L. Liu, M. Sun, Q. Chen, B. Liu, C.L. Qiu. Crystallization, mechanical and corrosion properties
of Zr-Cu-Ni-Al-Nb bulk glassy alloys. Acta Physica Sinica. 2006, vol. 55, no. 04, pp.1930-1935.
20. C.L. Qiu, L. Liu, S. Min, S.M. Zhang. The effect of Nb addition on mechanical properties,
corrosion behaviour, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body
fluid. Journal of Biomedical Materials Research - Part A. 2005, vol. 75, no. 4, pp. 950-956.
21. L. Liu, C.L. Qiu, H. Zou. The effect of the micro-alloying of Hf on the corrosion behaviour of
ZrCuNiAl bulk metallic glass. Journal of Alloys and Compounds. 2005, vol. 399, no. 1-2, pp.144-
148.
22. B. Liu, L. Liu, M. Sun, C.L. Qiu, Q. Chen. Influence of Cr micro-addition on the glass forming
ability and corrosion resistance of Cu-based bulk metallic glasses. Acta Metallurgica Sinica.
2005, vol. 41, no.7, 738-742.