The Genca extrusion tooling develop the best tools as per client’s requirements. We have a team which is expert in designing various material with exceptional quality.

1. Extrusion moulding and Extrusion die-to get the best results
A number of injection molding machine tools are available in the market. Some of them are injection
moulding machine, five layer multi die head extrusion machine, 6 and 7 layers extrusion blow
moulding machine, blow moulding machine 2-160L, blowing moulding machine 1L, Automatic
extrusion blow moulding machine, etc.
The process of extrusion moulding
Extrusion moulding is a process of manufacturing which is employed to manufacture hoses, curtain
tracks, pipes, rods, drinking straws, fibre, etc. It melts the granules into liquid form and this liquid is
pushed through a dying process, and forms a tube like shape. The shape of the tube is determined by
the size of the die. After this process the extrusion is made to cool down and finally it is moulded in a
shape of solid. The print can be made upon the tube and also cut into various intervals. The extruder
breaker plate is rolled to store or to pack together. Various shapes of the extruder breaker plate
result due to extrusion die including t sections, square sections, I sections, U sections, L sections,
circular sections, etc.
Optimal fibre cables are the most popular products of the extrusion moulds.
The generation of melted die
During injection mould, the motive of screw extrusion is to procure melted die. The principle of the
injection molding machine is also the same. The solo screws in the extrusion machines can generate
high pressure as compared to the injection in the modelling machine. In addition to the barrels, the
motive of the screws is to push the solid materials so that they can melt zone, and mix and also pump
the material to die in an effective manner. The design of the screw and its length depend on the polymer
which is processed.
Extrusion mould, if done in a proper way is an easy process. The time taken during this process can be
reduced to almost negligible if the right screw and right barrels are used.
A number of companies offer the extrusion moulding services but very few offers less time consuming
services. Thus, you should go in for the company which commits to give you the most efficient
process. Also, it should be able to make minimal wastage. Results matter the most and thus your choice
should be able to achieve you the best results.
You can find a list of all the extrusion companies on the net or even in yellow pages. Reviews about
these companies would be available online. So you can know which company is good and which is not.
Since the reviews are given by the experienced people it is always better to consult them.