1. HENROB Product Information SAM/US June 2004
Single Acting Riveting System
Primary Use
Repair and low volume production applications with rivet usage up to 250,000 rivets per
year.
Features
· Single hydraulic hose
· 115 volt, single phase operation
· Automatic mechanical rivet feeding from on-board cassette packaged rivets
· Power pack motor only runs on demand
· Able to retract partially to reduce overall rivet insertion time
· Capable of installing HENROB 3mm diameter tape collated rivets, 5mm through 8mm
long, and 5mm diameter tape collated rivets, 6mm through 14mm long.
Specifications
· Actuation method .............................................................Hydraulic / Spring Return
· Cycle time (full stroke)................................................................................ 5 sec*
· Setting Force adjustable (610- 8600 lbf)
· Nose to die opening (maximum) ................................................................. 45 mm
· C-frame throat depth (base model) ..............................................................35 mm
· Other available c-frame throat sizes............................................ 75, 125, & 250 mm
· Electrical service required ..................................................115 VAC, 60 Hz, 10 amp
· Max pressure Duty cycle rating (continuous @ 70° F ambient) ........... 6 cycles per min
· Power pack / controller envelope (H x W x D) ...................................40 x 24 x 30 cm
· Weight:
o Rivet Setter (base model) ....................................................8.2 kg (18 lbs)
o Power pack / controller (with oil).........................................33 kg (72.6 lbs)
*Cycle times can be reduced to 2 seconds using partial retract