Datavideo SE-2200 6 input HD broadcast quality switcher
Secced Traveler jib dv & eng6
1. The Secced TravelerJib DV&ENG 6 is a camera jib with 6 m / 18 ft total arm length and 4.69 m / 15.4 ft max.
lens height, complete remote control for pan-tilt head and for ENG cameras with Canon or Fujinon lens and
LANC-enabled Canon/Sony (H)DV or Panasonic DV, HD handheld camcorders. The Secced Traveler camera
jib's main components are the Jib arm, Pan & Tilt Remote Head, Controlling system (control box and
remote control bars for head and cameras), Tripod and Dolly. The complete Traveler jib set fits into two
hard cases, one larger roller case and a smaller suitcase, which can be transported by an average car.
Very responsive head with smooth movement, matching the level of famous brand in crane and remote
head industry. Slip ring installed for pan movement allows remote head could pan unlimited. The HD signal
can go through the slip ring, which means the remote head can output HD signal.
Remote head has max payload of 10kg. It is compatible with most ENG camera with either Canon or Fujinon
lens. Pan and tilt movement of remote head can be controlled, in addition the speed and damp of pan and
tilt movement can be adjusted as well.
The DV&ENG version of Secced Traveller Jib6 camcrane can control either DV & HDV camera or ENG format
camera, so there are two modes available. Switch between DV mode and ENG mode can be easily
completed by only changing the camera, a few cables and one controller.
Specially designed DV controller can control both Sony/Canon camcorders with LANC jack and Panasonic
handheld-type (ProLine) DV and HD cameras with "REMOTE" labeled jack (HVX/HPX/HMC/DVX/DVC Series).
For Sony and Canon DV & HDV cameras, it has the functions of control zoom/focus, power on/off, Fader,
back light on/off, and start/stop recording. In addition, for Panasonic DV & HD cameras, it has the functions
of control zoom/focus/iris and start/stop recording.
The crane system has tilt and pan lock, which enhance its safety.
Modular design and easy setup. One man can finish the setup of whole crane within half hour. The
equipped V-mount interface for battery make the crane work in the circumstance of no external power
source available.
Control System Configuration
• ENG Camera Controller
• DV Camera Controller
• Remote Head Controller
• Remote Head
• Control Box
• Main Cable
• Pan/Tilt Motor
2. Remote head Specification Remote Control
• Max. Payload: 15 kg / 33 lbs • DV Camera Controller - Secced JIB6-DV Bar
• Max. Speed: 360° in 5 sec • ENG Camera Controller - Secced JIB6-ENG Bar
• Min. Speed: 360° in 8 min • Remote Head Controller - Secced JIB6 Head Bar
• Tilt Range: ±720° • Remote Head
• Pan Range: Unlimited • Control Box
• Head Weight: 4.64 kg / 10.23 lbs • Lens Motor Kit - Secced JIB6-02
Crane Specification • Lens Control Cable - Secced JIB6-12
• Total length: 5.88 m / 19.29 ft • Zoom Adaptor Cable - Secced JIB6-12
• Max. Lens Height: 4.69 m / 15.38 ft • Main cable - Secced JIB4-10
• Min. Lens Height: -2.69 m / -8.8 ft • Pan/Tilt Motor - Secced JIB6-01
• Reach: 4.38 m / 14.37 ft • Bounding Strap - Secced JIB6-20
• Tilt Range: -70° / 60° • Screws for Pan/Tilt Motor - Secced JIB6-21
• Tripod Height Range: 1.47 ~ 1.75 m / 4.8 ~ 5.7 ft • AC/DC Cables, Adaptor
Electronic Part Specification Crane Arm
• Power input: AC 95-265V or DC 12-17V (Adaptor) • Crane Arm with 100mm Bowl and Arm
Extension (w/screws)
• Power output: DC 13.5V
• Central Pivot Section
Transportation
• Arm Pan/Tilt Brake
• Large Hard Case (roller)
• Tripod
• Hard Case (suitcase)
• Dolly w/castor
Transportation
• Transportation Weight: 85 kg / 187.4 lbs