https://www.scribd.com/presentation/566503447/Rail-Saftey

1. Rail safety
training
By SHARPTRAINING

2. Welcome to issue 7 of Rail Safety
Readers will be aware that the South Australian Parliament is considering new rail
safety regulations. When this bill is passed, it will become law.
Most Australian jurisdictions are likely to pass legislation, withDecember 2012 is
the start date.
When state legislatures adopt implementing legislation, things will change.
TSV is collaborating with the National Project Office to ensure the success of the
project. think the regulatory processes would go well,
Most critically, there will be no decrease in safety supervision.

3. Rail Safety Tips
and Facts
It's train time at any hour!
Because they rarely see a train at the highway-rail
crossings they pass across every day, many drivers
pay little or no attention
Trains are unable to swerve!
The train merely travels along the rails. Only the
warning siren and emergency brakes are available
to engineers. A train in emergency braking will be
stop, but not in time to avoid the collision

4. Rail Safety Tips
and Facts
Trains are unable to come to a complete halt in a short
period of time.
Every wheel has brakes, but it takes that long for all of those
brakes to overcome the train's massive weight. The engineer
cannot surrender to you, therefore always yield to the train.
Take care not to get fooled by the optical illusion!
The rails' parallel lines converge toward the horizon, fooling
our imaginations into believing the train is further away than
it is. When these illusions are present, it is extremely hard to
correctly evaluate the speed of a train.

6. key elements of learning
Taking
appropriate
safety
precautions to
access the rail
corridor
Taking
appropriate safety
precautions to
access the
danger zone Taking the
appropriate action in
an emergency
situation

7. One of the most successful methods
to increase rail safety, dependability,
and efficiency is to invest in
staff.Only by ensuring that every
element of the network, from station
to track, is equipped with the
essential skills via ongoing training
and development,.
What is Rail Safety Training
Previously known as the Rail Industry
Safety Induction (RISI), this nationally
recognised course will provide
participants with the knowledge,
training and skills to effectively work
safely in and around the rail corridor.

8. The information, training, and abilities
acquired throughout the training course
enable participants to work safely in and
near the rail corridor. Previously, it was
called the Rail Industry Safety Induction
(RISI). This unit of competence covers the
skills and information needed to access a
rail corridor that complies with rail safety
regulations.
It equips participants with the necessary
information and abilities to become
compliant. The Queensland Acts and
Regulations, as well as nationally
recognised compliance norms and/or
recommendations, are included.
Rail safety is ensured by the use of access
provider regulations, processes, and
protocols. Practical observation and
demonstration in a real Rail Corridor will
be part of the training. Where practical is
not possible, a simulated scenario is used.

9. We are experts in the field of health
and safety, so you can be certain
that you are in good hands. Our
Railway Safety courses will provide
you the information and education
you need to guarantee that you
understand the safe working
procedures employed in the
australia, which will keep everyone
those around you safe when
working near on the line.
Please visit rail safety training for more information about the Rail safety training
To know about cpr training visit https://sharptraining.com.au/courses/cpr-low-voltage-rescue/
To know about Safely Access the Rail Corridor visit https://sharptraining.com.au/courses/safely-access-the-rail-corridor-sarc/