Macramé para iniciantes.pdf

MACRAME KNOTS BOOK FOR
BEGINNERS
DISCOVER HOW TO TURN YOUR
HOUSE INTO A WORK OF ART WITH
MACRAME TECHNIQUES FOR
MAKING KNOTS. DISCOVER
EXCLUSIVE PROJECT IDEAS FOR
YOUR CREATIONS

© Copyright 2020 - All rights reserved.
The content contained within this book may not be reproduced, duplicated or
transmitted without direct written permission from the author or the
publisher.
Under no circumstances will any blame or legal responsibility be held against
the publisher, or author, for any damages, reparation, or monetary loss due to
the information contained within this book. Either directly or indirectly.
Legal Notice:
This book is copyright protected. This book is only for personal use. You
cannot amend, distribute, sell, use, quote or paraphrase any part, or the
content within this book, without the consent of the author or publisher.
Disclaimer Notice:
Please note the information contained within this document is for educational
and entertainment purposes only. All effort has been executed to present
accurate, up to date, and reliable, complete information. No warranties of any
kind are declared or implied. Readers acknowledge that the author is not
engaging in the rendering of legal, financial, medical or professional advice.
The content within this book has been derived from various sources. Please
consult a licensed professional before attempting any techniques outlined in
this book.
By reading this document, the reader agrees that under no circumstances is
the author responsible for any losses, direct or indirect, which are incurred as
a result of the use of information contained within this document, including,
but not limited to, — errors, omissions, or inaccuracies.

Introduction
Chapter 1: Macramé for Beginners
Chapter 2: Macramé Knots Book
Chapter 3: Macramé Projects I
Chapter 4: Macramé Projects II
Chapter 5: Instruction Books
Chapter 6: Macramé Necklaces
Chapter 7: Everything You Need to Start
Chapter 8: Simple Tie Macramé Knots Methods?
Chapter 9: Easy DIY Macramé Plant Holder
Chapter 10: Macramé-The Green Macramé Color Is an Eco-
Friendly Painting.
Chapter 11: Macramé Home Décor
Chapter 12: Knot Variations
Chapter 13: The Wrapped Knot
Chapter 14: Terminologies Used in Macramé
Conclusion

Introduction
Macramé is a Type of textile-making That Doesn't Demand the conventional
method of weaving or knitting, but alternatively by way of a set of knots. It's
deemed to have begun since the 13th century at the western hemisphere with
all the Arab weavers. They'd not the surplus ribbons and yarn onto the
endings of both handloomed cloths such as towels, veils, veils and shawls
into decorative fringes. What we discovered fascinating is that sailors had
been people to genuinely create this alluring and also have been imputed to
dispersing this art to various states throughout the vents they'd stop. They'd
decorate the handles of knives, bottles and other things that can possibly be
discovered on the boat and utilize them to find something that they wanted or
wanted whenever they reached land. With reference to this nineteenth century
sailors generated hammocks and straps having an activity referred to as
“square foot".
Materials which Are Often utilized for Macramé are Cotton twine, hemp,
yarn or leather. While there are variations, the principal knots would be the
square knot, although complete feasibility and double half hitches. Jewelry is
usually developed by blending ribbons with diamonds, diamonds, rings,
diamonds or cubes. In the event you have a look at the huge bulk of the
friendship outfits exhausted by faculty kiddies you will learn they will have
been created through the use of Macramé.
After I had been analyzing up about this basic Knots which are often utilized
in creating Macramé, I came around the cavaedia Macramé. This design
comprises two colors' that will be consists of 2 main knots which can be left
making a milder sort of fabric which works great for dining table mats,
purses and publication etc. Along with covers. Cavaedia Macramé is well
known as Valentina cavaedia who gained a golden trophy of fame out of
1961 before she passed on at age 97 in 1969. Back in Italy through the entire
conclusion of this first world war that this exceptional lady became the
headmistress of a house in to the evil or orphaned kids in turn. This really is a
center where approximately 100 youths may possibly be placed between the
ages of 1-5. To keep the kiddies busy she educated them an art she had heard
from her great grandma, Macramé. The kiddies would create matters to
advertise in marriage savings and attentive records were kept of each child's
income and might be spread in their mind when they'd leave your house.
Regrettably your house at which she had been casa del only just lived until

1936 when due of this political situation in Italy it was too tricky because of
the benefactors of your house to keep on.
The enthusiasm for Macramé appeared to fade for Some Time, but was
widely used from the 1970's from the American neo-hippies as well as
grunge audiences in producing jewelry. This art was comprised in handmade
bracelets, anklets and bracelets adorned with handmade glass beads and
natural elements such as shell and bone.

Chapter 1: Macramé for Beginners
There are plenty of places available for people who want to learn how to
macramé. Macramé focuses as art on creating complex nodes that generate
complete designs that can be turned into elegant bracelets, flower pots and
decorative wall hangings. If you are interested in this topic, the first and least
complicated step in trying to learn how to macramé is to understand the basic
knots and some diagrams.
If you want to add some macramé to your furniture, you can choose to pursue
a DIY project or purchase something similar in a home products shop. For
DIYers, start with a simple project to avoid getting frustrated and stopping
before you finish.
Mastering the simple nodes is an important step that allows you to find more
advanced knotting techniques more easily.
Try using items you already have before you buy a whole stock of macramé
supplies for your first project. You will want to be sure that before you invest
a lot of money, you love this sport. Choose one thread type and one assembly
ring. Search around the house for a work surface frame. You can purchase
those macramé pins to connect the file to the wall. Nonetheless, for your first
project, you can use safety pins to save some money.
The online network is an excellent place to start looking for alternatives to
macramé. Visual aids are of enormous help and make learning how to
macramé easy. For many people, it is much easier to follow diagrams rather
than written directions, which are hard to comprehend. And once you have
become familiar with the visual aids, it is time to get the supplies to start the
macramé process.
A diagram cannot help your macramé properly, irrespective of how thorough
it is and how well it is explained. There is a need for a thread that can
effectively macramé efficiently. Like any acquired art, it is practical to try to
learn how to macramé. Get some straightforward, basic diagrams to get
training representations going. The simpler ones are less complicated than the
complexities of the sophisticated ones. You will lead them with plenty of
time and exercise.
Apart from simple knot instructions, you will also have to study and practice
a little before you can memorize and make comfortable knots. That's not

going to be taught if you rush, step by step to learn how to macramé. Once
you have mastered the simple knot patterns, then line up them to do
straightforward works like bracelets. In addition to the ties, you also need an
eye to match the best colors to produce the knotwork.
Bracelets are ideal for beginners, as the easiest knots without difficulty are
necessary. You can work with very complex trends when you feel more
confident with your abilities. The biggest positive about intricate and
extremely complex structures is that they can be designed solely to create
very exceptional ornamental objects.
Determining how long you need to learn how to macramé depends on many
factors, such as how quickly you can learn the technique. If you have knitted
or sewn for a long time, the degree of difficulty should be considerably lower
because the process is identical.
Macramé is a fun craft to learn, and with a small budget, you can continue.
There are plenty of free or fair trends and a great way to start reading. This is
a beautiful art to include your family, grandchildren or anyone.
Macramé is Everywhere
You don't need to look for a yoga studio to teach you how to knit a knotty
board, a drapery plant hanger or a small key chain together. Boho and
minimalist variations provide a wet yet trendy feel.
Macramé supplies-You want to get the materials going!
Macramé materials are typical for cording, ringing, pins, work boards and
beads. Such main supply types include various scale, form and content
combinations. Various ventures, together with expectations, will determine
the exact types of macramé provision.
There are two primary forms of macramé cords: Natural and Synthetic.
Jute is typically a natural, twin-like fiber, whereas synthetic macramé cords
appear to be smooth. These can be ordered in a range of colors. Synthetic
macramé cord is often bent instead of twisted in its shape.
The rings for macramé designs vary in size from keyring to large hoops.
Often, hoops or rings can be used as macramé frames to be connected with
the knots still fixed to them.
T-pins are macramé materials used to keep the work on a board. Macramé

boards are often triangular, compact and made of wood or cork pressed. T-
pins join the boards to start a macramé project and encourage you to work
peacefully on your project without risking losing your seat or action which
could be detrimental to the outcome. Such pins are known for their broad
cross-section, which allows maneuverable pins. A lot of people who find
macramé that spinning loops of cords vertically with a board is less
complicated and less likely to tangle their designs than on horizontal
surfaces, for example.
In many macramé bits, beads are used. These are available in wood, ceramic
and plastic. Round, oval and cylindrical is popular forms of beads for
macramé supplies. Wood beads could be coloured light or black. The plastic
beads used in macramé designs could be translucent or opaque, while
ceramic macramé beads, such as painted floral motifs, appear to be framed.
Macramé supplies-What to start with!
The principal thing you need from your macramé jewelry supply is the cord
for knotting designs. One of the most common is hemp which is a lock or
twine from a hemp plant. It is super strong and long-lasting. It is now
possible to achieve in a wide range of colors and the old "styles. “You only
need a few more things to continue after you get your chain.
The surface area you are working on is the most critical resource. I started
with a clipboard and put my cords on a pencil. A foam pillow that I covered
with fabric is my personal favorite. A piece of corkboard is another choice.
These can be found in most craft stores. I recommend it is at least 3/8 inches
thicker or thicker, and about 11x17 inches thicker. You need a big enough
section to be put conveniently on your lap to lean against a wall. You will
need some nice strong pins to hold your project to your work area. I propose
either sewing pins or T-pins to keep wigs on the heads of foam. If your string
is fragile as satin thread, the sewing pins should be used up with colored
balls. You won't leave a massive hole like sometimes the T-pins.
The hole diameter is your only limitations. Most cords are usually about 1m
thick.
Project suggestions
You can execute so many different macramé designs. Each layout is
composed of hundreds of variations. You will create your patterns and come

up with some genuinely unique textiles once you become accustomed to
knotting. Think of ways to change a few of these macramé ideas: Planters
hanging keychains
Belts
Jewelry fringe on other textiles
Millennials may have brought macramé back, but people of all ages can
appreciate it and fall in love with it.
Macramé craze faded over time—but, in the 70s, it became popular once
more as a means to create draperies, table cloths, wall hangings, jean shorts,
bedspreads, and even plant hangers. It was also during this time that
Macramé started being popular as jewelry for the grunge and neo-hippie
crowd.
Main Knots Used
1. Square/Reef Knot. This is the primary knot used. This is done by binding
the line or rope around a certain object. It is also known as the base knot. You
could make it by tying a left hand over knot over a right hand over knot. In
short, right over left, and left over right.
The Square Knot
2. Half Hitch. This is done by working the end of one line over the standing
part of the knot. It is one of the most valuable components of knots, bends,
and hitches, among anything else.

The Half Hitch
3. Overhand Knot. Another knot you could use is the overhand knot. It is
known as one of the world’s fundamental stitches, and is especially helpful in
Macramé. To tie, you could simply loop a thread to the end with the help of
your thumb. Or, you could also twist a bight by placing your hand over your
wrist as you loop. Use your fingers to work all the way to the end.
The Overhand Knot
4. Crown Knot. Crown knot means that you have to go over the knot, go
under twice, over twice, and under again. You’ll then create something like
what’s shown on the illustration below.
Cavandoli Macramé
Cavandoli Macramé is the term given to the form of Macramé that allows
you to create intricate knots—perfect for jewelry and home décor! It was
named after Valentina Cavandoli, who experimented on the use of different
knots to create her own Macramé patterns while teaching in a Montessori.
It’s done by using both the square and half hitch knots—so you could be as
creative as possible. These different knots then balance each other out,
helping you create some of the most beautiful projects around!

Important Macramé Terms
Of course, you could also expect that there are certain terms you would be
dealing with while trying Macramé out. By knowing these terms, it would be
easier for you to make Macramé projects. You won’t have a hard time, and
the crafting would be a breeze!
For this, you could keep the following in mind!
Alternating
This is applied to patterns where more than one cord is being tied together. It
involves switching and looping, just like the half-hitch.
Adjacent
These are knots or cords that rest next to one another.
Alternating Square Knots (ASK)
You’ll find this in most Macramé patterns. As the name suggests, it’s all
about square knots that alternate on a fabric.
Bar

When a distinct area is raised in the pattern, it means that you have created a
“bar”. This could either be diagonal, horizontal, or vertical.
Bangle
Bangle is the term given to any design with a continuous pattern.
Band
A design that has been knotted to be flat or wide.
Buttonhole (BH)
This is another name given to the Crown or Lark’s head knot. It has been
used since the Victorian Era.
Button Knot
This is a knot that is firm and is in a round shape.
Bundle

These are cords that have been grouped together as one. They could be held
together by a knot.
Braided Cord
These are materials with individual fibers that are grouped together as one. It
is also stronger than most materials because all the fibers work together as
one.
Braid
Sometimes called Plait, this describes 3 or more cords that have been woven
under or over each other.
Body
Bight
Crook

This is basically just the part of the loop that has been curved and is situated
near the crossing point.
Core
This term refers to a group of cords that are running along the center of a
knot. They’re also called “filling cords”.
Cord
This could either be the material, or cord/thread that you are using, or specific
cords that have been designed to work together.
Combination Knot
These are two knots that have been designed to work as one.
Cloisonne

A bead with metal filaments that is used for decorative purposes.
Chinese Crown Knot
This is usually used for Asian-inspired jewelry or décor.
Charm
This is a small bead that is meant to dangle and is usually just an inch in size.
Doubled
These are patterns that have been repeated in a single pattern.
Double Half Hitch (DHH)
This is a specific type of knot that’s not used in a lot of crafts, except for
really decorative, unusual ones. This is made by making sure that two half
hitches are resting beside each other.

Diameter
This describes the material’s weight, based on millimeters.
Diagonal
This is a row of knots or cord that run from the upper left side all the way to
the opposite.
Excess Material
This describes the part of the thread that’s left hanging after you have knotted
the fabric. Sometimes, it’s hidden by means of using fringes, too.
Fusion Knots
This starts with a knot so you could make a new design.
Fringe

This is a technique that allows cords to dangle down with individual fibers
that unravel themselves along the pattern.
Flax Linen
This is material coming from Linseed Oil that’s best used for making jewelry,
and even Macramé clothing—it has been used for over 5000 years already.
Finishing Knot
This is a kind of knot that allows specific knots to be tied to the cords so they
would not unravel.
Findings
These are closures for necklaces or other types of jewelry.
Gemstone Chips
This is the term given to semi-precious stones that are used to decorate or
embellish your Macramé projects. The best ones are usually quartz, jade, or

turquoise.
Horizontal
This is a design of the cord that works from left all the way to the right.
Holding Cord
This is the cord where the working cords are attached to.
Hitch
This is used to attach cords to cords, dowels, or rings.
Inverted
This basically means that you are working on something “upside-down”.
Interlace
This is a pattern that could be woven or intertwined so different areas could

be linked together.
Micro-Macramé
This is the term given to Macramé projects that are quite small.
Metallic
These are materials that resemble silver, brass, or gold.
Mount
Mount or Mounting means that you have to attach a cord to a frame, dowel,
or ring and is usually done at the start of a project.
Netting
This is a process of knotting that describes knots formed between open rows
of space and is usually used in wall hangings, curtains, and hammocks.
Natural

These are materials made from plants, or plant-based materials. Examples
include hemp, jude, and flax.
Organize
This is another term given to cords that have been collected or grouped
together as one.
Picot
These are loops that go through the edge of what you have knotted.
Pendant
A décor that you could add to a necklace or choker, and could easily fit
through the loops.
Synthetic

This means that the material you are using is man-made, and definitely not
natural.
Symmetry
This means that the knots are balanced.
Standing End
This is the end of the cord that you have secured so the knot would be
properly constructed.
Texture
This describes how the cord feels like in your hand.
Tension or Taut

This is the term given to holding cords that have been secured or pulled
straight so that they would be tighter than the other working cords.
Vertical
This describes knots that have been knitted upwards, or in a vertical manner.
Working End
This is the part of the cord that is used to construct the knot.
Weave
This is the process of letting the cords move as you let them pass over a
number of segments in your pattern.
Common Materials Used
Of course, as you’ll be doing various projects, you can expect that you’ll also

be using various materials. However, there are basic materials that you
always have to have with you when creating Macramé projects. These
include the following:
1. Cords. The best ones you can use are 3-ply cords, which are made of 3
different fibers twisted together, just like the one shown below. These cords
can also be made from any of the following: yarn, leather, jute, hemp, linen,
cotton twine.
3-Ply Cords
2. Beads. These are used to create jewelry, such as bracelets, necklaces, and
the like. The best beads you can use are those made from glass, wood, or
resin.
Example of Macramé Beads
3. Gemstones. Sometimes, gemstones are also added to lend more flair to
your projects, making them great eye-candy!

Macramé Necklaces made from gemstones
4. Knotting Board. Finally, you can use a knotting board to keep your
macramé items in place as you create those jewelries!
A Macramé Board that’s available in the market
Beginner’s Bracelet

This is an easy Macramé project that’s perfect for beginners!
What you need:
Glue-on end clasps
Jewelry glue
Ring connector
Cotton or hemp twine
Instructions:
First, take three of the hemp or cotton twine strands and make a loop out of
them. Loop the loop that you have made around the connector and then make
a knot on each side.
Now, you’ll see 6 strands coming off the sides of your loop after you have
inserted it through the connector. Braid each side—you can make simple
braids, or even 6-strand braids, if you can do it.

Trim the ends off once you get to the end. Make sure to use jewelry glue and
secure the braid by gluing it on. Fully twist the end caps to coat the spine of
your bracelet. Check the length before securing so you can be sure that it
would really fit you.

Chapter 2: Macramé Knots Book
Alternating Square Knots
This is the perfect knot to use for basket hangings, decorations, or any
projects that are going to require you to put weight on the project. Use a
heavier weight cord for this, which you can find at craft stores or online.
Watch the photos very carefully as you move along with this project, and
take your time to make sure you are using the right string in the right point of
the project.

Don’t rush, and make sure you have even tension throughout. Practice makes
perfect, but with the illustrations to help you, you’ll find it’s not hard at all to
create.
Start at the top of the project and work your way toward the bottom. Keep it
even as you work your way throughout the piece. Tie the knots at 4-inch
intervals, working your way down the entire thing.

Tie each new knot securely before you move on to the next one. Remember
that the more even you get the better it is.
Work on one side of the piece first, then tie the knot on the other side. you are
going to continue to alternate sides, with a knot joining them in the middle, as
you can see in the next photo.
Again, keep this even as you work throughout.

Bring the knot in toward the center and make sure you have even lengths on
both sides of the piece.
Pull this securely up to the center of the cord, then move on to the next
section on the cord.

You are going to gather the cord on one side for the next set of knots, then
you are going to go back to the other side of the piece to work another set of
knots on the other side.
Work this evenly, then you are going to come back to the center.

It’s a matter of sequence. Work the one side, then go back to the beginning,
then go back to the other side once more. Continue to do this for as long as
your cords are, or as long as you need for the project.
For the finished project, make sure that you have all your knots secure and
firm throughout, and do your best to make sure it is all even. It is going to
take practice before you are able to get it perfectly each time, but remember
that practice does make perfect, and with time, you are going to get it without
too much trouble.
Make sure all is even and secure, and tie off. Snip off all the loose ends, and
you are ready to go!
Capuchin Knot

This is a great beginning knot for any project, and can be used as the
foundation for the base of the project. Use lightweight cord for this – it can
be purchased at craft stores or online, wherever you get your macramé
supplies.
the project.
create.

Start with the base cord, tying the knot onto this and working your way along
the project.
Twist the cord around itself 2 times, pulling the string through the center to
form the knot.

too much trouble.

Crown Knot
supplies.
the project.
create.

Use a pin to help keep everything in place as you are working.
Weave the strings in and out of each other as you can see in the photos. It
helps to practice with different colors to help you see what is going on.

Pull the knot tight, then repeat for the next row on the outside.

Continue to do this as often as you like to create the knot. You can make it as
thick as you like, depending on the project. You can also create more than
one length on the same cord.
too much trouble.
Diagonal Double Half Knot

the project.
create.

Weave in and out throughout, watching the photo as you can see for the right
placement of the knots. Again, it helps to practice with different colors so you
can see what you need to do throughout the piece.

too much trouble.
Frivolite Knot

Use the base string as the guide to hold it in place, then tie the knot onto this.
This is a very straightforward knot; watch the photo and follow the directions
you see.

Pull the end of the cord up and through the center.

Horizontal Double Half Knot
supplies.

the project.
create.

too much trouble.
Josephine Knot

Use the pins along with the knots that you are tying, and work with larger
areas all at the same time. This is going to help you keep the project in place
as you continue to work throughout the piece.
Pull the ends of the knots through the loops, and form the ring in the center of
the strings.
too much trouble.

Lark’s Head Knot
supplies.

the project.
create.
Use the base string as the core part of the knot, working around the end of the
string with the cord. Make sure all is even as you loop the string around the
base of the cord.

Create a slip knot around the base of the string and keep both ends even as
you pull the cord through the center of the piece.

too much trouble.
Reverse Lark’s Head Knot

Use two hands to make sure that you have everything even and tight as you
work. You can use tweezers if it helps to make it tight against the base of the
string.

Use both hands to pull the string evenly down against the base string to create
the knot.

Again, keep the base even as you pull the center, creating the firm knot
against your guide cord.
too much trouble.
Lark’s Head Half Stitches Knot

supplies.
’
the project.
create.

You are going to work this the same as the lark’s head, just going in the
opposite direction. Make sure you keep it firm against the base of the cord
and work through the steps as you did with the last.
Watch the photos as a guide, following each step as you see them outlined
there.

too much trouble.
Single Half Stitch
supplies.
the project.

create.
Use both hands to work around the cord, and make sure you follow each loop
before you put on the next loop. One step at a time as you see in the photo,
and you’re going to be fine.

too much trouble.
Spiral Stitches

Chapter 3: Macramé Projects I
DIY Macramé Feathers
Beautiful, wispy macramé feathers clogged my social media pages as late as
possible-but I'm not crazy about it. They are incredibly beautiful, and I
certainly got to buy them so I had to bookmark, to hang in the room of the
children. But I was also curious about how they were made, of course. How
do you achieve this perfectly soft fringe in the world? It involves a brush of a
cat. Enough has been said. Honestly though, there are endless possibilities
here, and I could not wait to play more with this technique. But I hope I'll
inspire you to do these at home in the meantime.
Cut for a medium sized feather:
• 1 32" strands around the spine
• 10-12 14" strands around the top
• 8-10 12" strands around the middle
• 6-8 10" strands around the bottom
Fold in half the 32 "strand. Choose one of the 14”, fold them in half and tuck
them under the spine. Take the next 14 "strand, fold it in half and attach it
into the top horizontal strand loop. Pull this through and lay it horizontally on
top of the oppositional strand. Now pull the bottom strands through the top
loop all the way. Pull both ends of the spectrum tightly. In the next row, you
will alternate the starting side. Pull through the top loop the lower threads.
And squeeze. Keep going and work in scale slowly.
Push up the strands to tighten-grab the lower end of the middle strand (spine)
with one hand and push up the strands with the other. Once finished, drag the
fringe down to meet the middle strand's bottom. Give her a rough trim
instead. Not only does this help guide the shape, but it also helps brushing out
the strands. To be honest, the shorter the lines, the better. It also helps to have
a very sharp tissue shear pair!
Start at the spine when brushing and push hard when brushing into the thread.
To get that perfect, delicate fringe, it will take many hard strokes. Work down
your way. Do not want the brush to throw off any strands while you brush the
lower end of the spinal cord. You're going to want to stiffen the feather next.

The cords are soft that it is just flopping if you collect it and try to hang it.
Give it a spray, or two, and allow at least a few hours to be tried.
DIY Tassel and Macramé Keychains
Who doesn't love a sweet ring? Particularly a lovely DIY version which takes
no time to make, uses stuff you've already got, can be as simple or as
fantastic as you want? If you need an excuse to make a personalized
keychain, we have you:
Update your keychain before remembering it, create a replacement set of
keys for your domestic pet sitter, make a replacement set of keys you can
leave from your neighbour so that when you lock out you have not to break
into your own place.
Organize yourself by making a special key ring for all those small rewards
cards. Use this to improve your macramé skills. In order for the stripped
Macramé keychain, I used vertical clove hitch knots and wool-roving thread.
The third and fifth personalized keychain are super easy – strings and a few
Perles with a tassel. And the fourth DIY keychain is only a long braid, folded
in half, wrapped in floss of embroidery. Beads are hand-painted and made
from Sculpey.
Materials needed for Macramé Keychains
• Key Ring
• 3/16” Natural Cotton Piping Cord
• Beads
• Embroidery yarn or floss
• Scissors
You can make things fancy on your keychains tassel or macramé by
wrapping them in different yarn or floss colors.
Simple Modern DIY Macramé Wall Hanging
Here's one Macramé's funny thing. They may think the hanging patterns of
the larger macramé wall are super complicated to complete, but trust me,
they're not! It's an easy idea as long as you keep the knots and the overall
design quite simple. That's exactly what this project is about macramé. The

shape! It's extra-long and slim and it's going to work in those itty-bitty
random wall areas where you need some texture. Or hang it out of a door. It's
a decent size. It's a pretty little nod for your decor.
Materials Needed for Macramé wall hanging
• Macramé Rope– I have been using this 4 mm rope– 12– 16′ (as in feet)
cords are required (twelve). Note that this is a thick hanging wall, which is
why we need longer cords. To act as your hanger, you will also need 1
shorter piece of cording. Simply tie it on either end with a simple knot.
• A dowel or a stick– I used a long (ha- ha) knitting needle. As long as it
is straight and robust and as long as you need to work with what you have!
Here is the step-by-step guide for Macramé hanging wall.
The first thing you want to do with each end is to knot a cord. For our project,
this will serve as the hanger. Making a macramé wall hanging when its
hanging is much easier than lying flat. This can be hanged from cabinet
knobs, door knobs, a wreath hanger or even a hanger for a picture. Just make
sure it is robust!
Begin by folding in half your 16′ cords. Make sure that the ends are the same.
Place the cord loop under the dowel and thread through the loop the ends of
the rope. Pull closely. That's the Head Knot of your first Reverse Lark. (For
assistance, refer to basic macramé knots). Repeat with the other 11 cords.
First make 2 Square Knots rows. Now make 2 rows of Square Knots
Alternating. Now make 2 more Square knots sets. Follow this pattern until
you have 10 rows in total (2 rows of knots in square, 2 rows of square knots
in alternation). Working from left to right– make two half-hitch knots across
your piece in a diagonal pattern. Now, from right to left– make double half-
hitch knots across your piece in a diagonal pattern.
have 4 rows in all. Make 2 more rows of knots of square. We will finish the
hanging wall with a set of spiral knots– This is basically a half-square node
sequence (or left-side square branch). (Do not end on the right side of the
knot, just make square knots and spiral on the left side for you again and
again.)
To build this spiral, I made a total of 13 half square knots. Finally– I trimmed
in a straight line the bottom cords. The total size for the hanging of my wall is

6.5′′ wide by 34.
DIY Round Macramé Boho Coasters
I don't seem to be able to rest every time I find a craft idea, until I know how
to do that, these coasters are the perfect example, I've done a macramé
bracelet before, but to make a macramé round is strange for me. After
exploring the internet, finding some confusing posts and making my first
coaster after ways to create it. That's the way I found it easier (although
there's another one I tested as well) and it also got me the most beautiful
result.
Supplies:
• 3 mm cotton cord
• Something to hold the cords, a cork coaster or a board, either tape or as
I used it.
• Pins to hold if the cork is used.
• Fabric Scissors
• Ruler or measuring tape
• Comb
Boho Christmas Trees
Cut the yarn in 7-8-inch bits. Take two strands and fold them in half in order
to form a loop. Place one of the loops under a twig. Start with the bowed end
of the other strand and move the ends of the strand under the twig through the
loop. Thread through the loop below the twig the ends of that strand. Pull
tightly and repeat, okay? If you have added enough knotted strands, use a
brush or a comb to separate the threads. The "almost finished" tree is going to
be a little floppy so you have to stiffen it with some starch.
When erect, cut the Boho Christmas trees into a triangle shape and decorate
them with small baubles or beads. I just made the jewelry wire a little flower
star. They're going to take about 10 minutes to make a whole bunch. I think
they'd make beautiful gifts or you could hang them on your Christmas tree.
Macramé Curtain
Tie four strands together on the same foam core board and place pins in the

top knot to keep those in place beneath the two center strands. Take the right
outer strand (pink) and pass it over the other two center fibers to the left side.
Take the left (yellow) outer strand and pass it under the pink strand, that is
behind the middle fibers, and on the other side over the pink strand. Push
closely the two strands. Then, in the first step, you just reverse what you did!
Take the leftmost strand (now the pink) and lay it over two strands in the
middle. Take the extreme right strand (which is now the yellow) and transfer
it under the pink, behind the two middle strands, and on the other side over
the pink. Pull the two strands tightly until they create a knot from the woven
strands. That's the most difficult part! These basic motions are repeated by
the rest of the steps. To make another knot right next to your first knot, repeat
steps 1-3 with four more threads. Put in two right strands of the first knot for
a new group with two leftmost strands of the second knot.
Repeat with the new group your basic knot by taking the outer right (purple)
strand and passing it over the middle two strands to the left side. Take the
outside (green) left and pass it through the purple strand, after the medium
strands, and across the purple strand on the other side. Push closely the two
fibers. Now turn the first step back! Take the leftmost strand (which is the
purple now) and lay it over two strands in the middle. Take the extreme right
strand (the green) and pass it under the purple, behind the two middle strands
and across the violet on the other side. Pull closely these two threads. By
moving the two leftmost threads and the two rightmost strands, divide the
middle group of strands. Repeat the fundamental knot with both classes and
continue until so long as you like.
I built 14 rope classes, each with four lines, all 100 inches long, when I began
the actual curtain. It made a clean knot to cut two cords twice as long (thus
200 inches) on top of the curtain and then hung strands across the rod at the
middle point and tied up a knot to create a group of four strands. Since doing
this method with big ropes is much larger than the thread, you're going to
have to find something to hang your rod from so you let your rope hang
under it (we've used a bike rack to hang our rope).
You can see that making the simple knots with the yarn is really the same
idea, but only on a much larger scale. I rendered the base knot near the top of
all 14 bands and then made a new knots line below and above them (as in the
yarn instructions). I then went down a new row, took knots under the original
knots and kept the knots rowing until I had finished all the rows I needed.

Make sure you stay back while you make your knots to make sure you tie
your knots in even rows. I maintained a handy ruler so that I could measure
the distance between each knot and the wooden curtain rod to make sure that
they turned out. I dropped the rest of the strands to complete the curtain until
5 rows of knots were completed.
Hang your new curtain in your perfect place once you have finished braiding
the ropes. Finally, wrap the masking cassette at the ends where the cloth
reaches the ground, which is 6 1/2 feet tall (or white cassette which is "dorm
cassette') I have used. Slice the candle and leave intact 2/3 to half of the
candle. It helps to prevent spawning of overtime. I hung an off-white piece of
textile on the macramé curtain (on the existing clothes rack). I love how it
turned out that curtain! It feels different but still functional, not too loud.
We've got a very loud rug in the room so we didn't need anything with tons of
colour or a lot of attention.
Friendship Bracelet Watch
You'll need your watch face and floss to get started. I use art floss in the
colours of brown, white and minty blue. Cut strips approximately 48 inches
long. You will need 10 of these long strands for each side for this watch face
(but just cut 10 right now, leave the others until you're ready to start from the
other side). To start making our harness, we will lash each piece of floss onto
the chain. Bring together the ends of a long piece of floss and pick up the
end. Push through the bar and pull the ends through the loop you've built.
Start with all your floss cutting. Make sure you keep the colors in your
pattern as you want them. I wanted thick orange and mint stripes and thin
white stripes. My order was therefore: orange, orange, white, mint, mint,
mint, mint, mint, white, orange, orange.
And now you're just starting to braid your friendship. We won't have this
weird thing bundled up in most friendship bracelets that begins with a knot,
because we've latched on the message. Pretty better, huh? You have the
choice, like any other friendship bracelet, to twist and then tie when you are
wearing it. This is not the most beautiful option, but it's going to work well.
But if you want to use closures, continue reading.
You want to take a decent amount of glue when you get the length and run a
line where you need to cut. Apply the glue on the front and back sides of the
threads. For our next move, this will hold the braid securely together. I used

the fast-dry tacky glue from Aleena because I'm very impatient. I didn't think
about this and I had to shorten my straps after a few wears. Perhaps you'd like
to go ahead and make the watch a bit tight. The first wear may be
uncomfortable, but it will be perfect for a couple of hours. Use sharp scissors
to cut the area where you applied the glue through your strap. See how well it
sticks with each other? Go ahead and run a little at the very end to help avoid
fraying. Place the clamp on the end of the straps and use the pin to firmly
lock on. Finish with a jumping ring on one Anda jumping ring and closing on
the other.
And you got it there! It's a pretty fun wear watch and brings in a new way the
whole trend of the friendship bracelet. What do you think about it? Are you
going to make one? Sounds like a great project for me on the weekend!

Chapter 4: Macramé Projects II
Serenity Bracelet
(Note: if you are familiar with the flat knot, you can move right along into the
next pattern)
This novice bracelet offers plenty of practice using one of micro macramé’s
most used knots. You will also gain experience beading and equalizing
tension. This bracelet features a button closure and the finished length is 7
inches.
Knots Used:
Flat Knot (aka square knot)
Overhand knot
Supplies:
White C-Lon cord, 6 ½ ft, x 3
18 - Frosted Purple size 6 beads
36 - Purple seed beads, size 11
1 - 1 cm Purple and white focal bead
26 - Dark Purple size 6 beads
1 - 5 mm Purple button closure bead
(Note: the button bead needs to be able to fit onto all 6 cords)
Instructions:
Take all 3 cords and fold them in half. Find the center and place on your
work surface as shown:

Now hold the cords and tie an overhand knot, loosely, at the center point. It
should look like this:
1. We will now make a buttonhole closure. Just below the knot, take each
outer cord and tie a flat knot (aka square knot). Continue tying flat knots
until you have about 2 ½ cm.
2. Undo your overhand knot and place the ends together in a horseshoe shape.

3. We now have all 6 cords together. Think of the cords as numbered 1
through 6 from left to right. Cords 2-5 will stay in the middle as filler cords.
Find cord 1 and 6 and use these to tie flat knots around the filler cords.
(Note: now you can pass your button bead through the opening to ensure a
good fit. Add or subtract flat knots as needed to create a snug fit. This size
should be fine for a 5mm bead). Continue to tie flat knots until you have 4
cm worth. (To increase bracelet length, add more flat knots here, and the
equal amount in step 10).
4. Separate cords 1-4-1. Find the center 2 cords. Thread a size 6 frosted
purple bead onto them, then tie a flat knot with cords 2 and 5.

5. We will now work with cords 1 and 6. With cord 1, thread on a seed bead,
a dark purple size 6 bead and another seed bead. Repeat with cord 6, then
separate the cords into 3-3. Tie a flat knot with the left 3 cords. Tie a flat
knot with the right 3 cords.
6. Repeat step 4 and 5 three times.
7. Find the center 2 cords, hold together and thread on the 1cm focal bead.
Take the next cords out (2 and 5) and bead as follows: 2 size 6 dark purple
beads, a frosted purple bead, 2 dark purple beads. Find cords 1 and 6 and
bead as follows: 2 frosted purple beads, a seed bead, a dark purple bead, a
seed bead, 2 frosted purple beads.
8. With cords 2 and 5, tie a flat knot around the center 2 cords. Place the
center 4 cords together and tie a flat knot around them with outer cords 1 and
6.

9. Repeat steps 4 and 5 four times.
10. Repeat step 3.
11. Place your button bead on all 6 cords and tie an overhand knot tight
against the bead. Glue well and trim the cords.
Lantern Bracelet

This pattern may look simply, but please don’t try it if you are in a hurry.
This one takes patience. Don’t worry about getting your picot knots all the
exact same shape. Have fun with it! The finished bracelet is 7 ¼ inches in
length. If desired, add a picot knot and a spiral knot on each side of the center
piece to lengthen it. This pattern has a jump ring closure.
Knots Used:
Lark’s Head Knot
Spiral Knot
Picot Knot
Overhand Knot
Supplies:
3 strands of C-Lon cord (2 light brown and 1 medium brown) 63-inch lengths
Fasteners (1 jump ring, 1 spring ring or lobster clasp)
Glue - Beacon 527 multi-use
8 small beads (about 4mm) amber to gold colors
30 gold seed beads
3 beads (about 6 mm) amber color (mine are rectangular, but round or oval
will work wonderfully also)
Note: Bead size can vary slightly. Just be sure all beads you choose will
slide onto 2 cords (except seed beads).
Instructions:
1. Find the center of your cord and attach it to the jump ring with a lark’s
head knot. Repeat with the 2 remaining strands. If you want the 2-tone

effect, be sure your second color is NOT placed in the center, or it will only
be a filler cord and you will end up with a 1 tone bracelet.
2. You now have 6 cords to work with. Think of them as numbered 1
thorough 6, from left to right. Move cords 1 and 6 apart from the rest. You
will use these to work the spiral knot. All others are filler cords. Take cord
number 1 tie a spiral knot. Always begin with the left cord. Tie 7 more
spirals.
3. Place a 4mm bead on the center 2 cords. Leave cords 1 and 6 alone for
now and work 1 flat knot using cords 2 and 5.
4. Now put cords 2 and 5 together with the center strands. Use 1 and 6 to tie a
picot flat knot. If you don’t like the look of your picot knot, loosen it up and
try again. Gently tug the cords into place then lock in tightly with the next
spiral knot.

Notice here how I am holding the picot knot with my thumbs while pulling
the cords tight with my fingers. If you look closely you may be able to see
that I have a cord in each hand.
5. Tie 8 spiral knots (using left cord throughout pattern).
6. Place a 4mm bead on the center 2 cords. Leave cords 1 and 6 alone for
now and work 1 flat knot using cords 2 and 5. Now put cords 2 and 5
together with the center strands. Use strands 1 and 6 to tie a picot flat knot.
7. Repeat steps 5 and 6 until you have 5 sets of spirals.
8. Next place 5 seed beads on cords 1 and 6. Put cords 3 and 4 together and
string on a 6 mm bead. Tie one flat knot with the outermost cords.

Repeat this step two more times.
Now repeat steps 5 and 6 until you have 5 sets of spirals from the center
point. Thread on your clasp. Tie an overhand knot with each cord and glue
well. Let dry completely. As this is the weakest point in the design, I advise
trimming the excess cords and gluing again. Let dry.
Celtic Choker

Elegant loops allow the emerald and silver beads to stand out, making this a
striking piece. The finished length is 12 inches. Be sure to use the ribbon
clasp which gives multiple length options to the closure.
Knots Used:
Lark’s Head Knot
Alternating Lark’s Head Chain
Supplies:
3 strands of black C-Lon cord; two 7ft cords, one 4ft cord
18 - green beads (4mm)
7 - round silver beads (10 mm)
Fasteners: Ribbon Clasps, silver
Note: Bead size can vary slightly. Just be sure all beads you choose will
slide onto 2 cords.
Instructions:
1. Optional – Find the center of your cord and attach it to the top of the
ribbon clasp with a lark’s head knot. I found it easier to thread the loose ends
through and pull them down until my loop was near the opening, then push
the cords through the loop. Repeat with the 2 remaining strands, putting the
four-foot cord in the center. If this is problematic, you could cut all the cords
to 7ft and not worry about placement. (If you really trust your glue, you can
skip this step by gluing the cords into the clasp and going from there).

2. Lay all cords into the ribbon clasp. Add a generous dap of glue and use
pliers to close the clasp.
3. You now have 6 cords to work with. Find the 4 ft cords and place them in
the center. They will be the holding (or filler) cords throughout.
4. Begin your Alternating Lark’s Head (ALH) chain, using the outmost right
cord then the outermost left cord. Follow with the other right cord then the
last left cord. For this first set, the pattern will be hard to see. You may need
to tug gently on the cords to get a little slack in them.

5. Now slide a silver bead onto the center 2 cords.
6. The outer cords are now staggered on your holding cords. Continue with
the ALH chain by knotting with the upper right cord…
then tie a knot with the upper left cord.
7. Finish your set of 4 knots, then add a green bead

8. Tie four ALH knots followed by a green bead until you have 3 green beads
in the pattern. Then tie one more set of 4 ALH knots.
9. Slide on a silver bead and continue creating sequences of 3 green, 1 silver
(always with 4 ALH knots between each). End with the 7th silver bead and 1
more set of 4 ALH knots, for a 12” necklace.
10. Lay all cords in the ribbon clasp and glue well.

11. Crimp shut and let dry completely. Trim excess cords.
Climbing Vine Keychain
This pattern is a fun way to practice the Diagonal Double Half-Hitch knot. It
works up quickly and is a fun piece to work in various colors. Just be sure to
use enough beads on the fringe work to weigh the threads down.
Knots Used:
Lark’s Head

Flat Knot
Diagonal Double Half-Hitch
Supplies:
Measure out 3 cords of Peridot C-Lon, 30” each
1 key ring
2 (5mm) beads
8 (plus extra for ends) pink seed beads
4 (plus extra for ends) gold seed beads
12 (plus extra for ends) green seed beads
8 (plus extra for ends) 3mm pearl beads (seed pearl beads will work also)
Note: You can vary slightly the bead size. Just be sure that 2 cords will fit
through the 2 main beads (the 5mm size beads)
Instructions:
1. Fold each cord in half and use a lark’s head knot to attach it to the key
ring. Secure onto your work surface with straight pins. You now have 6
cords to work with.
2. Separate cords into 3 and 3. Using the left 3 cords, tie 2 flat knots. Repeat
with the right 3 cords.

3. Place all six cords together and think of them as numbered 1-6, left to
right. Skip cord 1 and place a pink seed bead on cord 2. Skip cord 3 and place
2 gold seed beads on cord 4. Skip cord 5 and put 3 pink seed beads on cord 6.
4. Using cord 1 as your holding cord, tie a row of diagonal double half-hitch
(DDHH) knots beginning on the left and ending on the right. Using cord 1 on
the left, move it to the right as a holding cord and tie DDHH knots to the
right.
5. Put all six cords together. Place 7 small beads on cord 1. Skip cord 2 and
string your focal bead onto cords 3 and 4. Skip cord 5 and put 3 small beads
on cord 6.

6. Use cord 6 as your holding cord and tie a row of DDHH knots from right
to left. Repeat once more.
7. Repeat beading from step 3.
8. Repeat a row of diagonal double half-hitch knots from step 4 (left to right)
twice.

9. Bead as stated in step 5.
10. Repeat a row of DDHH knots as written in step 6 (right to left) twice.
11. Separate cords into 3 and 3. Tie 1 flat knot with the left 3 cords and 2 flat
knots with the right 3 cords.
12. Separate cords into 1 – 4 – 1 and tie 1 flat knot with the center 4 cords
only, letting cords 1 and 6 float.
13. Separate cords into 3 and 3. Tie 1 flat knot with each section.
14. Repeat step 12.

15. Bead ends with various size beads. Be sure there is enough weight to hold
the ends downward. Tie an overhand knot with each cord and glue well. Let
dry completely and trim cords.
Filigree Lacelet Bracelet
The Overhand knot, Flat knot, Alternating Lark’s Head knot and Diagonal
Double Half Hitch knot are all in play here.
This “Lace-let” fits the very definition of filigree as it is both delicate and
fanciful. I hope you enjoy this design that is open and light. The finished
length is 7 1/2 inches and includes a button closure.
Knots Used:
Overhand Knot
Diagonal Double Half Hitch

Flat Knot
Alternating Lark’s Head Knot
Supplies:
66” length white C-Lon cord, 4 strands
6 clear beads, 5mm
56 clear beads, 3mm
5 clear beads, 4mm
1 bead for button closure, about 7mm
164 clear seed beads
Note: You can vary the bead sizes slightly. Just be sure the beads you
choose will slide onto 2, and sometimes 3 cords. (The seed beads only need
to fit onto one cord).
Instructions:
1. Pin this onto your project board. Tie about 9 flat knots (for 7mm button
closure bead). Now undo the overhand knot and fold the flat knots into a
horseshoe shape. Using the outer cord from each side, tie 1 flat knot.
2. Take the rightmost cord and place it over all others down to the left to
work Diagonal Double Half Hitch (DDHH) knots from right to left. Put 1
clear seed bead on each cord, then tie another set of DDHH knots from right
to left.

3. Separate cords into 4-4. Working with left 4 cords bead as follows: on the
left most, cord put 4 clear 3mm beads with a seed bead between each one.
The next cord in gets 5 clear seed beads. The next cord in needs a 5mm clear
bead. And the last cord of this section gets 5 clear seed beads. Use the outer 2
cords to tie a flat knot around the inner cords.
4. Working with right 4 cords: Place a 3mm clear bead on the center 2 cords.
Place a seed bead on the right most cord. Now use this right most cord to tie
an Alternating Lark’s Head (ALH) knot around the other 3 cords. Repeat 4
times.
5. Using the left most cord as a holding cord, work DDHH knots from left to
right. Place a seed bead on each cord then work another set of DDHH knots

(from left to right again) using the left most cord as your holding cord.
6. Separate cords into 4-4. Working with left 4 cords: Place a 3mm clear
bead on the center 2 cords. Place a seed bead on the left most cord. Now use
this left most cord to tie an ALH knot around the other 3 cords. Repeat 4
times.
7. Working with right 4 cords: the right most cord gets 4 clear 3mm beads
with a seed bead between each one. The next cord in from the right needs 5
seed beads. The next cord in gets a 5mm clear bead. And the last cord of this
section gets 5 seed beads. Use the outer 2 cords to tie a flat knot around the
inner cords.
8. Repeat steps 2-7 for pattern until you have about 6 1/2 inches in length.
9. Separate cords into 3-2-3. On the left set of cords, place a 4mm bead. With
the center 2 cords thread on a 3mm bead, a 4mm bead and another 3mm
bead. On the right 3 cords place three 4mm beads. Find the outermost cord on

each side and tie a flat knot around the rest.
10. Thread your button bead onto the center 4, or 6 cords if possible. Use the
outer cords to tie a flat knot. Glue flat knot and let dry. Trim excess cords.

Chapter 5: Instruction Books
Learn macramé with step by step instructions accompanied by real knot
pictures.
Plant Hanger Ayla

Description: Plant hanger of 2 feet and 3,5 inches (70 cm)
Used Knots: Square knot, half square knot, alternating square knot, crown
knot, gathering knot and half hitch knot
Supplies: 4 strands of cord of 13 feet and 1,5 inches (4 meter), 4 strands of 16
feet and 4,8 inches (5 meter), 2 strands of 3 feet and 3,4 inches (1 meter), 1
wooden ring of 2 inches (50 mm) and 4 wooden beads: diameter 0,4 inches
(10mm)
Directions (step-by-step):
1. Fold the 8 longer strands of cord in half through the wooden ring. Tie all
(now 16) strands together with 1 shorter strand of 3 feet and 3,4 inches (1 m)
with a gathering knot. Cut the cord ends off after tying the gathering knot.
2. Now follows the crown knot. It is the easiest when you turn your project
up-side-down in between your legs, as shown on the photos. Divide the 16
strands into 4 sets of 4 strands each. Each set has 2 long strands and 2 shorter
strands. Tie 5 crown knots in each set. Pull each strand tight and smooth.

3. Tie 15 half square knots on each set of four strands. In each set the 2
shorter strands are in the middle and you are tying with the 2 outer, longer
strands. Drop down 2,4 inches (6 cm of no knots).
4. Tie 1 square knot with each set.

5. Then add the wooden bead to the 2 inner cords of each set and tie 1 square
knot with each set again. Drop down 2,4 inches (6 cm of no knots) and tie 6
square knots with each of the 4 sets.
6. Take 2 strands of 1 set and make 10 alternating half hitch knots. Repeat for
the 2 left strands of that set. And then repeat for all sets.

7. Tie an alternating square knot to connect the left two cords in each set with
the right two of the set next to it. Followed by 3 square knots for each new set
(so you have 4 square knots in total for each new formed set).

8. Place your chosen container/bowl into the hanger to make sure it will fit,
gather all strands together and then tie a gathering knot with the left-over
shorter strand of 3 feet and 3,4 inches (1 m). Trim all strands to the length
that you want. If you want you can unravel the ends of each strand.
Plant Hanger Bella

Description: Plant hanger of 60 cm (not counting the fringe)
Supplies: 6 strands of cord of 13 feet and 1,5 inches (4 meter), 4 strands of 16
feet and 4,8 inches (5 meter) and a wooden stick of 11,8 inches (30cm)
Used Knots: Half knot, Lark´s Head knot, (Alternating) square knot and Coil
knot
1. Fold all strands in half and tie them to the wooden stick with Lark´s Head
knot. The longest strands are on the outer side (2 strands at the left side and 2
at the right).

2. Make 4 rows of alternating square knots. (See knot guide for explanation)
3. In the 5th row you only make 2 alternating square knots on the right and 2
on the left.

4. In the 6th row you only tie 1 alternating square on each side.
5. Then, with the 4 strands on the side, you tie 25 half (square) knots. Do this
for both sides, left and right side.

6. Take 4 strands from the middle of the plant hanger, first drop down 2,4
inches (6 cm of no knots) and then tie a square knot with the 4 center strands.
Now with the 4 strands next to the middle, drop down 3,15 inches (8 cm of
no knots), and tie a square knot. Do this for both sides (left and right).
7. Drop down 2,4 inches (6 cm of no knots) and tie 2 (alternated) square

knots by taking 2 strands from both sides (right and left group). Then 3
alternating square knots with the other groups. These knots must be about at
the same height where the strands with the half knots have ended.
8. Take the 2 outer strands of the left group, which you made 25 half knots,
and take the 2 outer strands of the group on the right. First dropping down 2,4
inches (6 cm of no knots), you tie a square knot with these 4 strands.

9. Do the same with the rest of the strands left over, make groups of 4 strands
and tie alternated square knots on the same height as the one you made in
step 8. Drop down 2,4 inches (6 cm of no knots) and make another row of
alternated square knots using all strands.
10. Drop down 2,4 inches (6 cm of no knots) and make 5 rows of alternated

square knots. Be careful: this time leave NO space in between the alternated
square knots and you make them as tight as possible.
11. Drop down as many inches/cm as you want to make the fringe and tie at
all ends a coil knot.
12. Then cutoff all strands, directly under each coil knot.

Description: Plant hanger of 2 feet and 9,5 inches (85 cm) - not counting the
fringe
Supplies: 4 wooden beads of 1,2 inches (3cm), 3 inches (7,5cm) wooden ring,
4 cords of 18 feet (5,5 meter), 2 cords of 15 feet (4,5 meter) and 1 cord of 2
feet and 1,6 inches (65 centimeters)
Used Knots: Gathering knot, crown knot, (double) half hitch, (Half) square
knot and Square knot
1. Fold the 6 longer cords in half, placing the loops neatly side by side. Use a
gathering knot for tying the cords together with the shortest cord. This gives
you twelve cords in total.
2. Arrange the cords in four groups of three cords each. Make sure that each
group consist out of 2 longer cords and 1 shorter cord. Tie three Chinese
Crown knots with the four groups of cords.

3. Slip the wooden ring over the top loop and drop it down 1,2 inches (3 cm)
from the last Chinese Crown knot. With each of the twelve cords, tie one
double half hitch on the ring to secure it. This gives you a ring of double half
hitches.

4. Arrange the cords into four groups of three cords each. The middle cord of
each group is the shorter one, this is called the filler cord. Repeat step five
thru eight for each group.
5. Tie four square knots, each having one shorter, filler cord.
6. Skip down 2 inches (5 cm). Tie one square knot picot.

7. Slide a bead up the filler cord. Tie another square knot picot directly under
the bead.
8. Skip down 2 inches (5 cm). Tie five square knots, each having one filler
cord.

9. Skip down 2 inches (5 cm). Tie 10 half square knots, each having one filler
cord.
10. Repeat the following procedure for each of the four groups you have just
knotted: skip down 2,4 inches (6 cm); take one cord from each neighboring
square knot to tie a square knot WITHOUT a filler cord. This gives you four

square knots made of two cords each. The cords in the middle of each group
are NOT used to knot.
11. Skip down 4,8 inches (12 cm). Gather and tie all cords together with one
of cords hanging using to tie 10 times a half hitch.
12. Cut the fringe to measure 6 inches (15 cm).

Chapter 6: Macramé Necklaces
Next up are Macramé necklaces. If you want necklaces that are glamorous
but unlike anything you see on the market.
Silky Purple Necklace
This silky necklace looks quite regal as it is in the color of purple. With the
help of rhinestones, it becomes all the more elegant!
What you need:
Rhinestones
Clasp
2 inches of chain
Thread and needle (in the same color scheme)
6 yards silk rattail cord
Instructions:
Cut string into 6 yards, and the other to be 36 inches. Make sure that you loop
the last chain link.
Make use of square knots to tie the outer cord with the inner cord, and make
sure to overlap on the left. Bring the string’s end right under the center
strings. Knot by pulling the right and left ends of the cord.

Repeat the process on the opposite side of the chain and make sure to pull
tight through the loop and make use of square knots until you reach your
desired length.
Double knot the cord once you read your desired length so you could lock it
up. Make use of fabric glue to secure the ends of the cord together.
Attach rhinestones with glue and let dry before using.

Enjoy your new necklace!
Leathery Knotted Necklace
A leather necklace has that rustic and earthy feel. Now, if you want to add
some edge to an already beautiful thing, you could try Macramé and go and
knot the thread!
What you need:
Pliers
Scissors
Chain
Crimp ends
Jump rings
Clasp

7 silver beads
5 meters of leather cord
Instructions:
Cut leather into a meter each and make 4 parts, then make a four-strand braid
out of it.
Make use of the square knot to secure the loops. Copy on the left side of the
cord.
Add beads after you have done the first two knots. Hold it as you hold the
right string. Create an empty knot, loop, and add some beads again.
Secure both ends of the cord using the crimp end. You could also use glue to
keep it all the more secure.

Attach a piece of the chain at the end with a jump ring so your necklace could
be ready.
Enjoy your new necklace!
Macramé Gem Necklace
This one has that enchanting, beautiful feel! Aside from knots, it makes use
of gemstones that could really spruce up your look! Surely, it’s one necklace
you’d love to wear over and over again!
What you need:
Your choice of gemstones

Beads
Crocheted or waxed cotton
Water
Glue
Instructions:
Get four equal lengths of cotton—this depends on how long you want the
necklace to be.
Tie a base knot as you hold the four cotton lengths. Once you do this, you’d
notice that you’d have eight pieces of cotton lengths with you. What you
should do is separate them into twos, and tie a knot in each of those pairs
before you start knotting with the square knot.
Tie individual strands of the cotton to the length next to it. Make sure you see
some depth before stringing any gemstones along, and make sure to knot
before and after adding the gemstones to keep them secure.

Take four of the strands in your hand and tie a knot on the top side of the bag.
Tie strands until you reach the length and look you want.
Knot the ends to avoid spooling, and use water with glue to keep it more
secure.
Yarn Twisted Necklace
This one is quite simple as you can use any kind of yarn that you want,
especially thick or worsted ones to give your projects more flair and to make
it modest—but wearable!
What you need:
Yarn in various colors
Water
Glue
Instructions:
Cut two to four pieces of yarn—it’s up to you how much you want.

Start braiding, and knot using the square knot. Make sure that you secure the
pieces of yarn together.
Knot until your desired length, then secure the piece with a mix of glue and
water at the ends.
Nautical Rope Necklace

This one is light and easy on the eyes, and is quite edgy—literally and
figuratively, without being over the top! It will also remind you of the sea—
or the waves of the ocean!
What you need:
Pendant with jump ring or bail
Ruler
Scissors
White nylon cord
Knotting board
Instructions:
Cut 7 feet or 84” of nylon cord.
Then, keep the strands together as a group. Tie an overhand knot around the
two strings. Make sure there’s 1 to 2” of space between them.
Make an overhand knot 6” away from the end. Tighten the knot by pulling
individual strands and make sure to secure it on the knotting board. Separate
the strands into two groups.
Take the left part of the cord and cross it under the right corner of the cord.
Get the right cord group and cross it over the left side. Tighten as you pull
down and knot until you reach 16 inches.
Check the last double chain and make an overhand knot. Tie them 6 inches
from what you have created. Add a pendant, if you want, and make sure you
knot before and after adding it to keep it secure.

Chapter 7: Everything You Need to Start
Macramé Materials
Macramé stylists make use of different types of materials. The materials can
be classified in two major ways; the natural materials and the synthetic
materials.
• Natural Materials
The qualities of natural materials differ from the synthetic material and
knowing these qualities would help you to make better use of them. Natural
cord materials existing today include Jute, Hemp, Leather, Cotton, Silk and
Flax. There are also yarns made from natural fibers. Natural material fibers
are made from plants and animals.
• Synthetic Materials
Like natural materials, synthetic materials are also used in macramé projects.
The fibers of synthetic materials are made through chemical processes. The

major ones are nylon beading cord, olefin, satin cord and parachute cord.
Cord Measurement
Before you can embark on a macramé project, it is essential that you
determine the amount of chord you will need. This includes knowing the
length of the required cord and the total number of materials you have to
purchase.
Equipment: to measure, you will need a paper for writing, pencil, tape rule
and calculator. You would also need some basic knowledge of unit

conversion as shared below:
1 inch = 25.4millimeters = 2.54 centimeters
1 foot =12 inches
1 yard = 3 feet = 36 inches
1 yard = 0.9 meters
Note: The circumference of a ring = 3.14 * diameter measured across the ring
Measuring Width
The first thing to do is determine the finished width of the widest area of your
project. Once you have this width, pencil it down.
Next, determine the actual size of the materials, by measuring its width from
edge to edge.
You can then proceed to determine the type of knot pattern you wish to use
with the knowledge of the knot pattern. You must know the width and
spacing (if required) of each knot. You should also determine if you want to
add more cords to widen an area of if you would be needing extra cords for
damps.
With the formula given above, calculate and determine the circumference of
the ring of your designs.
Determine the mounting technique to be used. The cord can be mounted to a
dowel, ring or other cord. Folded cords affect both the length and width of
the cord measurement.
Cord Preparation
Though usually rarely emphasized, preparation of the cords and getting them
ready for use in Macramé projects is one of the core pillars of the art of
Macramé. At times, specialized processes such as conditioning and stiffening
of cords need to be carried out before Macramé projects can be begun. In
general, however, cord preparation in Macramé is mainly concerned with
dealing with cut ends and preventing these ends from unraveling during the
course of the project. During the course of a project, constant handing of
materials can cause distortion in the ends which can end up having disastrous
consequences on your project. Before starting your project, if you do not
appropriately prepare special kinds of cords, like ones that were made by the

twisting of individual strands, that cord is likely to completely come apart,
effectively destroying your project.
Therefore, cord preparation is extremely and incomparably important to the
success of any Macramé project, the preparation of each cord is meant to be
done during the first step of making any knot, which is the step where you cut
out your desired length of cord from the larger piece.
For cord conditioning, experts recommend rubbing beeswax along the length
of the cord. To condition your cord, simply get a bit of beeswax, let it warm
up a bit in your hands, and rub it along the cord’s length. This will help
prevent unwanted tight curls on your cord. Note that beeswax may be applied
to both natural and synthetic materials. For synthetic materials however, only
Satin and fine Nylon beading cords actually compulsorily require
conditioning. After conditioning, inspect your cords for any imperfections
and discard useless pieces to ensure the perfection of your project. After
conditioning, then comes the actual process of cord preparation. Cords can be
prepared (i.e. the ends can be prevented from fraying) through the use of a
flame, a knot, tape and glue.
To prevent unraveling of your cord using a flame, firstly test a small piece of
the material with the flame from a small lighter. The material needs to melt,
not burn. If it burns, then such a cord is not suitable for flame preparation. To
prepare using a flame, simply hold the cord to the tip of the flame for 2 to 5
seconds, make sure the cord does not ignite, but melts. Flame preparation is
suitable for cords made from olefin, polyester and nylon, and the process is
compulsory for the preparation of parachute cords.
Tying knots at the end of the cord is another effective method to prevent
fraying. The overhand knot is an all-time favorite, but knots such as the
figure 8 knot which is best suited to flexible cords can be used if you think
the knot might have to be undone at some point of your project. The
Stevedore knot can be used to prevent fraying when using slippery materials.
Glue is another priceless alternative that can be used to efficiently prevent
fraying at the ends of cords. However, not all kinds of glue may be used in
cord preparation. Only certain brands, such as the Aleen’s Stop Fray may be
used in cord preparation. Household glue might also be used, but only when
diluted with water. TO prepare your cord, simply rub the glue on the ends of
the material and leave it to dry. If you intend to pass beads over the glued

end, roll the cord’s end between your fingers to make it narrower as it dries.
Nail polish may also be used as an alternative to glue.
Tape is also a reliable method to prepare your cords. Simply wrap the tape
around the end of the cord where you want to prevent fraying of your
material. Make sure the end of the cord remains narrow by squeezing it
between your fingers. It is advisable to use masking tape or cellophane tape
for your preparations.
A special class of Macramé cords, known as a parachute cord requires a
special form of preparation. Parachute cords are composed of multiple core
yarns surrounded by a braided sleeve. To prepare a parachute cord (also
called a Paracord), pull out the core yarns from the sleeve, and expose the
yarns by about half an inch. Now cut the core yarns back, so that they
become even with the outer sleeve, and then push the sleeve forward till the
yarns become invisible. To complete the preparation, apply flame to the outer
sleeve till it melts, and then press the handle of your lighter onto the sleeve
while it’s still warm to flatten the area and keep it closed up. The melted area
will look darker and more plastic than the rest of the material.
Finishing Techniques
Finishing techniques refer to the methods by which the ends of cords, after
knots have been created may be taken care of to give a neat and tidy project.
Finishing is often referred to as tying off. Several finishing knots are
available, and are extremely effective methods for executing finishing
processes. Reliable finishing knots include the overhand knot and the barrel
knot.

Folding techniques are also dependable finishing techniques. For flexible
materials like cotton, all you need to do is fold the ends flat against the back
surface and add glue to the ends to hold them in place. For less flexible
materials, fold the cords to the back, then pass them under a loop from one or
more knots, and then apply glue, allow it to dry, and cut off excess material.
Finally, you can do your finishing with the aid of fringes. You may choose
between a brushed fringe and a beaded fringe.
Adding Cords

During Macramé projects, you would constantly be faced by the need to add
a cord to an existing cord or any other surface such as a ring or a dowel. The
process of adding cords to surfaces is usually called mounting. To add extra
cords to a ring or dowel, the most common technique to use is the Reverse
Larks Head Knot. When adding cords to already existing cords in use,
however, it is important that the new cords blend into the overall design. To
prevent lopsidedness of the pattern, it is also important to add an equal
number of cords to both sides in some projects. It is also important to avoid
gaps when adding new cords. You can add new cords to an already existing
cord using the square knot, the linked overhand knot and of course the
regular overhand knot. Other techniques used for adding cords include the
diamond stitch and the triangle knot.

Chapter 8: Simple Tie Macramé Knots
Methods?
There are different macramé knots. It may be difficult to explain all of them.
And that's why we concentrated on the most common macramé knots. Go
through the steps below to learn how easy it is to make the nodes.
Square Macramé Knot
• You'll need a protection pin along with cardboard to make this knot-3 cords
(red, green & orange).
• Take all three cords in one hand and tie a knot to bind to them. Use a safety
pin to tie them to the carton.
• Maintain cord pattern-red, green and orange-from left to right. Take the
right orange cord over the white cable.
• Then take the same orange cord and go to the left under the red cord.
• Then pick up the red string and place it under the green rope. Then the
orange rope passes down. That's a circle.
• Remove red and orange strings to complete the tie. Bring this new knot as
close as we did to the first.
• Repeat steps to make square knots as long as you want the string to be in the
same way.
Played Stitch Chain
• You need to have four cords (grey, purple, pink & white), safety pin and
cardboard to make this macramé knot.
• Take all four cords in one hand and tie the node upside down to protect
them. Use a safety pin to tie them to the carton.
• Retain the pattern of cords-pink, green, red, and blue from left to right.
Remove the black rope and travel on white and purple strings.
• Build and drop a circle around the two cords. Go behind each of the four
cords and bring to the left the grey cord.
• Now take a lilac cord and walk across white and rose cords. Create and
draw a string around both cords.

• You should fasten the cords together with a knot. Now bring down the grey
cord and continue precisely the same measures with the pink rope.
• You will work your way down cords and make bracelets or collars with
macramé knots.
Vertical head of Lark
• You've got to need two cords (dark blue & white), a safety pin and a carton
to get this knot.
• Pick up the two cords in one hand and tie a knot in the top to secure it. Use
a safety pin to patch it on the carton.
• Bring the cord pattern from right to left-white & dark blue.
• The white cord will carry out most of the work. Then wrap the white string
over the dark blue string and fold it down and then through the loop.
• At the back, bypass the dark blue cord with a white string, then take it
upwards and above, and at the end of the string.
• Something similar should be-over, under and under, over, over and over.
All you have to do is repeat the steps across the cords.
Advanced Knots of Macramé
Learn how to buy the right type of macramé cord, measure the correct cord
amount to use, and know-how to knot the cords correctly, so that they
produce the right macramé pattern. A pattern not aesthetically pleasing with
too tight or too loose ties or cords would undoubtedly affect how the finished
piece looks.
If you've experienced cord loss or if you have too much cord left over, you
can understand how important these tips are. The most important thing to
remember is that you should select the right thickness when selecting the
macramé cord because it is a crucial factor. A thicker cord requires more
length; it also requires a longer cord in a pattern with many knots.
If you choose to use a different type of cord from the specified kind in the
example, you face a result you don't like. If you have enough experience with
macramé cords, though, you can replace cord styles so long as they have the
desired amount, thickness, flexibility, texture and strength.

Unless you want to use a thicker thread, please note that you will need to
make fewer knots than the one suggested in the methods. The piece will look
voluminous even if you use lovely accessories like beads and pendants with a
thicker string and a lot of knots.
You should also be sure to tie the ties firmly or loosely. Consistency is
essential when the pattern is made. Too tightly knotted cords tend to bundle.
They are not in the right position to produce the desired result.
However, if you're still running out of cord, which is the best of us, then the
splicing process is still available. This is the urgent trick by lengthening a
string by cutting a string in a half-long direction, then connecting the two
ends by cutting out the strings and coating them with strong, clear adhesive.
Twist them and then air-dry them.
Quick Tips to Design A Macramé Armband
Ever wanted to create your collars, wristbands and designer bags, but did not
know how or did not have the resources? You probably have experienced
such a problem. Well, macramé design is what the physician ordered.
Macramé is a style of fabric that uses knotting. The fabrics used in the
macramé process vary from jute, silk, twine, hemp and cotton cords. It is a
process of combining cords, codes or strings to design a thing. This can be a
shirt, ring, necklace, etc. Macramé patterns could be extended by adding
different knots to create a complex or pattern. A macramé wristband might be
made as below:
Need materials
Scissors or a razor blade, a pencil or a moist board, A hemp thread or a string
of choice
Steps
Step 1 The wrist diameter is first determined. Then cut with the aid of the
scissors two sections of the hemp thread. The cut bits should be at least three
times the length of the handle or the measured diameter. If, for example, the
measurement was 5 cm, two strands of 15 cm, each should be cut.
Step 2 One strand is halved., the elastic string is tied on to the stylus barrel to
hang over the front of the stylus and also to ensure that loose ends are
hanging behind it. Such loose ends would travel through the circle and then

be drawn firmly.
The second strand should also repeat this process. You should put this pencil
in four lines. Mentally, from right to left, you should classify these four
molecules as 1, 2 3 4. You can use any labelling strategy that you find
comfortable.
Step 3 Next take Beach 1 to the west, above beach two and beach 3 (which
are the two beaches in the middle), and then beach four below.
Step 4 Take strand four behind the two strands 2 and 3 at this point, through
the loop that strand 1 created. Push both strand one and strand four firmly to
ensure half a square knot is accomplished.
Step 5 You should now execute a crossing operation. Follow this strand
crossing cycle until the bracelet exceeds the length you want. As you
continue to work, spirals are formed from the half-square nodes.
Step 6 The strings slipped from the pencil. Step 6 Then, take strand two and
strand 3 to reduce just a little the thickness of the loops. Then all four threads
are tied together, and two knots are joined to secure the work. These are
essential knots. Any strings that you find unacceptable should then be cut off,
and this should be achieved as close as possible to those knots.
Step 7 Now, you've got the watch on your hand. The knot should be placed
over the cord so that the necklace stays on your hand.
The above measures will enable you to create a simple macramé bracelet.
This macramé technique uses knotting instead of stitching or knitting. You
can also use beads to make a macramé beaded bracelet. The macramé
approach allows you to design different bracelet types. It's up to you.
Macramé Knot Tying, The Art Form of The Sailors
Well, the art of joining a macramé-knot was introduced by sailors of antiquity
on board ships. We get the very decorative art form of macramé from the
match of hits, figures eight and bowlines. Macramé knot tying has been used
for years to produce some of the finest and most complex work of art ever
done. On a list of these ancient fishermen, people used this practice to break
the décor of their houses. If your mind is like mine, a macramé knot will take
you into an older relative's living room with four or five macramé plant
hangers in the room. But the beauty of the sailor and how to decorate your

house is what I am talking about. It's a much better look, so you won't even
hear about hippies.
The art of the sailor originated from the need nodes. An example of this
technique that comes from necessity is a knot called the first of a monkey.
This knot is known as a fist of a monkey because it looks like a tiny punch.
Usually, the knot was wrapped around a piece of wood, or the paper was
balled and bound at the end of the rope as a weight. It is called a height
section. This raising line would be attached to the heavy mooring lines,
which would allow the sailor to throw the weighted monkey's fist to the
people on the sea, making it easier to pull the divine mooring line to the pier.
A macramé knot used for decoration in the form of key chains is derived
from this functional knot. The great thing is that these art pieces can be found
online and produced by anyone who can tie a knot. The macramé is often
binding with different materials, including cotton, hemp, nylon and manila
rope, to tie jars, render floor tubs, bell ringers, coasters, needle cups, etc.
Consider pouring a drink with a macramé knot covered Rum bottle for a
guest! Imagine what a friend thinks. "Holy Cow is a cool bottle where you
have something like that in the world." Buyers may find the right piece to
accentuate any room in their house by using a variety of materials. I beg you,
use one of these macramé knot artworks in your home and give some
beautiful accents, especially in a nautical room
Macramé knots, a form of patience
The dream of most homeowners is to take a normal daily place and transform
it into a room that surprises visitors. The use of art made of macramé knots is
a great way to make this dream come true. The technique that you put in your
house should say you and your personality. With so many artwork choices
made with macramé ties, you will find something that suits your personality
and style. The best thing is that all of these artworks are handmade so that
they are all a kind of development and will amaze your visitor when they
reach your house next time.
Such works of art are available online and can also be created by anyone who
can tie knots. Now I know that most of you dream about the macramé your
grandmothers made. I remember that the plant hangers from the late 70's
early '80s are the first thing I think about macramé. But the craft I am talking
about is created from materials such as cotton, hemp, nylon and manila. The

artist who makes this work uses these various materials to cover cans, render
mats of walls, bell rings, coasters, needle cases etc.
With the choice of materials used, it's not difficult to find items made from
macramé knots to match whatever furniture you have in your home. Such
pieces of art can then be displayed in your house, particularly any room with
nautical decor.
It is fun to decorate every table, wall or bar with an accent. Wouldn't a
macramé bottle of rum look 100 times better on a bar or shelf than that same
stupid bottle? Imagine drinking a drink from a rope-covered bottle for a
visitor and then setting it on a coaster made of string, all after they have come
into your house and cleaned their feet also on your floor mat made of cloth.
Finally, a home decor, which is a kind of decoration, and now the Jones will
keep up with you instead of the other way. It is a room with a beautiful focus
and art made of macramé knots creates that focus in every room. All these
complex works of art add an atmosphere to your space and people will want
to know from where you got them. When you purchase art to decorate your
house next time, remember that Macramé Knots are no longer your
grandmother's art.

Chapter 9: Easy DIY Macramé Plant Holder
This is not the macramé of your grandma. All right, maybe it is, but at some
point, something makes a comeback or another right? I love this macramé
plant holder's smooth and textured feel. And the best part, the best part? It
can be done in a few minutes! I'm all about basic projects that can be
completed in a couple of minutes.
Macramé plant holder
This is a perfect project to make extra yarn scraps for friends and family. You
can use live plants in your bowl, or you can use a fake one if you're a plant
killer like me. Any watering? No watering? That's up my alley — let's start
now!
Macramé Plant Holder Materials
■Metal or wooden ring
■Yarn
■Scissors

Macramé para iniciantes.pdf

Recommended

Recommended

More Related Content

Similar to Macramé para iniciantes.pdf

Similar to Macramé para iniciantes.pdf (20)

Recently uploaded

Recently uploaded (20)

Macramé para iniciantes.pdf