The document contains Ahmed Jassim Mohammed's personal and professional details. It summarizes his education in electromechanical engineering and over 7 years of work experience in installation, commissioning, and maintenance roles for companies like KHS, Coca-Cola, and Huawei in Iraq and Afghanistan. His responsibilities involved electrical wiring, PLC programming, troubleshooting machinery issues, and training personnel. He has technical skills in PLCs, Step-7 programming, sensors, and computer programs.

1. Page 1 of 4
PERSONAL DATA :
Date of Birth: 03-12-1991 E-mail: a.jassim1991@gmail.com
ahmed.j199050@yahoo.com
Cell Number: +9647711606878
Marital Status: single
Nationality : Iraqi
EDUCATION :
Bachelor of Electromechanical Engineering Dept/
Control and Systems (2010-2013)
University of Technology, Baghdad, Iraq.
PROFESSIONAL WORK EXPERIENCE
:
1- Organization:- AL-MASEERA COMPANY , IRAQ (for three month)
Position: - PLANT Engineer
 I work with Italian teams of (SACMI COMPANY) in mechanical and electrical
installation for machines and I connect all the electrical panels of the factory
also signal exchange between machines of NRP LINE .
 Commission of NRP filler, SMI shrink and conveyors.
2- Organization:- HUAWEI COMPANY(China company for communication) , IRAQ
(for three month)
Position: - SITE Engineer
 in HUAWEI I work in installations of antenna, make hardware configuration and
software configuration.
 also I was make the electrical installation of the cabinets same as the drawings .
 Install the power system for the towers.
Ahmed Jassim Mohammed
PROFESSIONAL PROFILE:-
one years’ experience of( Electrical wiring , designing and
connect all types of Electrical panels) , Operational and
Maintenance, Installation, Commissioning, Programming,
Sematic step-7 program, Troubleshooting, Breakdown
reduction and smooth operation with( KHS Germany
company for filling and packaging)
in this one years I work many projects with KHS Company:
1- Iraq(Erbil) coca cola, PET LINE .
2- Iraq(Kirkuk) Karwanchi group, CAN LINE.
3- Iraq(Karbala) Afico Company, PET LINE .
4- Afghanistan(Kabul) Pipes, CAN LINE .
5- Afghanistan(Kabul) Pipes, PET LINE .
6- Afghanistan(Kabul) Pipes, Aquafina LINE.

2. Page 2 of 4
3- Organization:- ( KHS COMPANY) PROJECT IRAQ (Erbil Kurdistan Coca Cola ,
I make electrical and mechanical installation for all machines and main power , and electrical
connection between machines and this job by reading the electrical and mechanical Diagrams for the
factory and machines .
 I work in Installation, Commission for all machines
 Repair electrical and software problems in FILLER and MIXER Machines.
 Installation, Commission and Vertical Start-Up of packer shrink and blow
Machines.
4- Organization:- (KHS COMPANY) PROJECT IRAQ, Kirkuk krwanchi group
 Mechanical and Electrical Installation, for all machines
 Installation, Commission and Vertical Start-Up of packer shrink Machine
 Commission of CAN LINE for (Mixer machine, packaging machine )
5- Organization:- (KHS COMPANY) PROJECT IRAQ, KARBALA, AFICO COMPANY
 Cable try drawing, cable pulling, electrical test.
 I make wiring for all machines and I connect all cabinet panel for machines.
 I make signal exchange between the PLC of machines .
 Commission of PET LINE for (Mixer machine, packaging machine and blow machine )
6- Organization:- (KHS COMPANY) PROJECT AFGHNISTAN, KABUL , ALOKOZAY NON
ALCOHOLIC
BEVERAGES COMPANY.
Position: Embedded Engineer plant care (for three lines can line, PET line, Aquafina
line)
Responsibility:.
 control production .
 maintenance engineer for all mechanical and electrical problems in machines.
 Increase the capability and problem solving skills of Operators and Technicians by doing Trainings .
 monitoring the correct execution of maintenance and service.
 reduce the downtime of system.
 planning required maintenance of equipment.
 suggestions for possible improvement.
 assessment of the operating and maintenance personnel.
 training of customer personnel.

3. Page 3 of 4
 Review daily, weekly and monthly Machine efficiencies, downtimes and make short term and long
term action plans to improve the efficiencies and performances.
 compliance with health & safety regulations.
 creating lists with recommended spare parts to order.
6 - Organization:- Vander Land company, Iraq, Baghdad national airport
Position: Electromechanical Engineer
 Electrical installation for the conveyors, counters and transporters of the bags.
 control all the motors with their sensor for all system.
 signal exchange between the units of this system.
 I help in PLC program of this project by Sematis step-7 program.
TECHNICAL TRAININGS :
 three days training for filler machine maintenance by Mr. Sasha KHS expert in Kabul
project.
 three days training for Sematic step-7 program by Mr. Kluse KHS expert in Kabul project.
 One week training for PLC basic by Mr. Kluse KHS expert in Kabul project .
 One week training for Shrink machine by MR. Steve KHS expert in Kabul project in Kabul
project .
 One day Maintenance Safety and Maintenance by COCA COLA Safety Manager.
 One day Package Line Monitoring System (PLMS) training .
 Two days training of Plan Maintenance training .
 Two days training of NCE & Total Performance Management (TPM).
 Three days training of Problem Solving Tools by Focus & Improvement Manager.
 Course English language in BBC Institute .
Qualification and Skills :
 Extensive knowledge of the PLC is equipped with the ability and Interface input and output
cards...The input and output cards digital and analog.
 I can treat wit Sematic step-7 program.
 All PLC Wiring Works.
 Strong knowledge in field devices, instruments and actuators (servo-valves, thermo
elements, transmitters.).
 Ability to handle special tools like pressure pump, multi-meter, frequency generator and
oscilloscope .
 Ability to understand and implement technical drawings (wiring diagram).
 Strong analytic and problem solving skills.
 The ability to repair faults and a logical follow-up and find a solution.

4. Page 4 of 4
 The ability to connect all type of sensors. Pressure and temperature sensors. Optical
Sensors .Metal sensors.
 Some Fields of communication and the Internet
 Hardworking and ready to accept challenges. Can work effectively under immense
pressures.
 A very good team player. Always eager to develop relationships among the team in a very
coherent manner.
 Confident & Optimistic with flexible & dynamic personality.
 computer skills :
Hardware and Software installation, Windows, Microsoft office(Word, Excel and power
point), Auto Cad, Mat lab, C++ and very good experience of using Internet.
Language :
 Arabic first language .
 English (Fluent in both written and spoken).
 German (beginner)