Recommended
More Related Content
Recently uploaded
Recently uploaded (19)
Featured
Featured (20)
Doodler1 share
- 1. PRESENTATION ON 3DOODLER Submitted By: Aarti Yadav (Student of M.Sc.(C.Sc.))
- 2. WHAT IS 3DOODLER? • Developed by Peter Dilworth and Maxwell Bogue • It is World’s first 3D pen • Capable of drawing in the air or on surface • Uses ABS and PLA plastics • Contains a mains-powered electric heater that melts plastic
- 3. KNOW YOUR DOODLER • Nozzle • Extrusion Speed Control(Fast) • Extrusion Speed Control(Slow) • Cooling Fan • LED Indicator • Plastic/Filament Loader • Maintenance Cover • Cleaning Tool • ON/OFF switch • Temperature Adjuster
- 4. STEPS TO USE 3DOODLER: • Plug in your pen and turn it on • Allow your doodle to heat up before loading plastic/filament • Load the pen • Extrude/Select your speed • Double click for continuous flow • Unloading/Reversing the plastic filament
- 5. TURN ON DOODLER • Turn the pen on • Set the slide switch to select HI for high temperature plastics like ABS LO for low temperature plastics like PLA • Takes approximately 1.5 minutes to heat up • During that time the LED indicator will be RED
- 6. LOAD THE PLASTIC • Load the plastic into the plastic loader • Give it a gentle clockwise twist
- 7. SELECT THE SPEED • Press and hold the button • Wait for the heated material to emerge from the pen tip • Releasing the chosen speed button will cause the pen to stop extruding the heated material
- 8. DOUBLE CLICK FOR CONTINUOUS FLOW • For continuous flow simply double-click on the desired extrusion speed • It will continuously extrude plastic up to 10 minutes • To stop the continuous flow of plastic, simply click on either the FAST or LOW button • To temporarily pause the continuous flow of plastic, hold down on either the button
- 9. UNLOAD THE PLASTIC • Hold down BOTH the FAST and SLOW extrusion buttons at the same time • The LED indicator will flash • When the plastic stops moving in reverse • Take it out from the back of pen
- 10. BENEFITS OF 3DOODLER • Dries quickly • Easy to Feel • Various Colour Options • Durable and Long Lasting • Economical • Easy-to-use
- 11. LIMITATIONS OF 3DOODLER • Does not adhere to everything • Requires access to power • Creating uniform dots can be difficult • Device can jam
- 12. USES 3Doodler can be used in many ways as follows: • Basic 3D shapes and 3D models • Jewellery, pendants and hanging ornaments • Decorative art and fridge magnets and much more……..
- 13. RELATED ARTWORK
- 14. THANK YOU