More than Just Lines on a Map: Best Practices for U.S Bike Routes
Optical fiber type mismatch problem when using otdr
1. Optical fiber type mismatch problem when using OTDR
OTDR (Optical time-domain reflectometer ) is classic fiber optic test equipment used to
characterize an optical fiber. It is most easy to use but it is also one of the most expensive, OTDR
could give you an overview of the whole system you test.OTDR may be used for estimating the
fiber optic cable length and fiber optic cable overall attenuation.It may also be used to locate
faults,such as breaks, bend and so on by measuring the return loss. The common types of OTDR-
like test equipment are:Full-feature OTDR,Hand-held OTDR,Fiber Break Locator,RTU in RFTSs.
Fiber Type mismatching is mean OTDR’s guide optical fiber is different with the under test
Optical fiber core. In the while, measurement results of optical fiber vertical axis will be
inaccurate. Transverse measurement accuracy.
The reason of Fiber Type mismatching, when the light incident from the Core diameter small
optical fiber to the fiber core diameter larger core diameter optical fiber, the large core diameter
fiber can not be incident light is completely full, so measurement error caused loss parameter.
The method of eliminate fiber Type mismatching is choosing right instrument guidance optical
fiber, so that measured optical fiber and guide optical fiber phase matching. Such as, use single
mode guiding fiber optic measuring single mode fiber, use multimode guide optical fiber
measurement multimode fiber. Perhaps, select the corresponding guiding fiber according to the
measured Optical fiber type and size.
Ingellen is a leading manufacturer and supplier of OTDR. All of the OTDR are tested in-house
prior to shipping to insure that they will arrive in perfect physical and working condition. And
they guarantee the OTDR to work in your system and all of fiber optic products coming with a
lifetime advance replacement warranty.