Shield Spill-repellent/Scotchguard/Fabric protector/Stain proof look Like Fresh your Fabrics many time

1. Shield Spill Repellent
How to apply Shield Spill Repellent to any
kind of fabric (paper etc.)and make it ‘spill
repellent’, ‘stain proof’, ‘dust resistant’ etc.
etc. (Any material that can absorb chemical
can be made spill repellent).
1. Items you should have……
1

2. Shield Spill Repellent Contd ….
1. i.Chemical
ii. Spray machine (available at
Most hardware stores)
iii. Open space which is duly
ventilated
iv. Away from electrical points (as
chemical is flammable) and
other flammable items.
2

3. Shield Spill Repellent Contd ….
2. Open chemical can, shake
it well and pour Chemical in
the spray machine
Pump up pressure.
3

4. Shield Spill Repellent Contd ….
3. Test on a small piece of fabric,
spray and ensure it is color
fast i.e. color does not bleed.
Once dry, test for spill
repellence with a water
drop
4

5. Shield Spill Repellent Contd ….
4. Once tested, keep
the fabric ready for
treatment and ensure
it is dust free. If
needed, vacuum clean
it.
5

6. Shield Spill Repellent Contd ….
5. start the treatment, spray
chemical on the fabric moving
nozzle at least three to four times
to ensure fabric is well and evenly
wet.
One litre of chemical should give
approx. 80 sft. of coverage of
250gsm fabric. Lighter fabric will
get more coverage and heavier one
less.
6

7. Shield Spill Repellent Contd ….
6. Leave the fabric to dry for at
least one hour at room
temperature.
7. Fabric has been treated.
Once dry, roll it back.
It can now be put to normal use
in production after three
hours though technically
drying process would
complete after 24 hours.
7

8. Shield Spill Repellent Contd ….
Thank you.
For any clarifications please do get in
touch with us.
www.mags-novel.com
info@mags-novel.com
8