1. Heat Sealer
Laboratory Heat Sealer
Scenario # 1 :
You want to do any trials on a new Laminate (or vendor).
But taking a Trial Run on the production will mean Huge
production losses and wastage of time.
Scenario # 2 :
Your current vendor has sent you a new consignment
which needs to be tested before acceptance.
How do you create samples for testing without putting
a production trial.
Scenario # 3 :
You want to prepare a new pouch design.
But modifying the production machine is time consuming,
expensive and also a loss of regular production.
Solution :
Laboratory Heat Sealer is an equipment to prepare
lab samples of heat sealed pouches / sachets.
So whether it’s a new pouch design, new laminate,
new supplier and just raw material testing,
you can create finished samples quickly and that too
within the comforts of your own laboratory.
Specifications :
Adjustable force : 15 – 300 Kg (Analog or Digital Pressure Display)
Adjustable temperature : 50 – 199.9°C (Digital P.I.D. Controller with Display)
Adjustable dwell time : 0 – 9.99 Seconds (Digital Display / Microprocessor based)
Seal Pattern : Straight lined or as per your design.
Sealing Depth : 6mm / 8 mm / 10 mm / 12 mm or as desired.
Sealing Length : 2 / 4 / 6 / 8 / 10 / 12 Inches or as desired.
Special Features :
Both sealing jaws are heated separately using high-density pencil heaters.
Option of controlling both heaters at a single temperature using a single controller or at single /
differential temperatures using 2 separate controllers for each sealer jaw.
The temperature controllers are not the regular On/Off type temperature controllers.
They are special P.I.D. Logic Temperature Controller for highest levels of control and repeatability.