ThermoJet is a proprietary design which uses air stripping to remove water and gas from lubeoil. The main features and benefits are that it is simple to use and maintain.

1. Lubrication Engineers Pty Ltd
Effective Water & Gas
Removal from Oil
Introduction to ThermoJet
Purifiers

2. Lubrication Best Practice
Our business is based around assisting our
customers to improve equipment reliability
through lubrication best practice.
LE protects our customers equipment
through applying –
• the Right product
• in the Right place
• at the Right time
• in the Right Quantities
• with the Right equipment

3. 3

4. ThermoJet Oil Purifiers
The ThermoJet Oil purifier is an
advanced, effective and reliable
method to remove water and gas
from industrial oils.
The ThermoJet utilises the
unique principle of air/gas
stripping making it technically
sound and mechanically simple.

5. ThermoJet – Water Removal
The Thermojet will remove free and emulsified /
dissolved water from the system oil
Reductions in water contamination from 1,000PPM
down to < 100PPM are possible in as few as 5
passes of the system volume
– Dependant on oil condition, ingress rates, process operation

6. ThermoJet – Principle of Operation

7. Principle of Operation (cont’d)
The process of the ThermoJet is noted below.
– The Jet Mixer provides the interface of hot oil and
air to deliver enhanced purification

8. Principle of Operation (cont’d)
System fluid is drawn into the ThermoJet via the
inlet pump
The fluid is then pumped through an inline filter to
remove contamination before entering the heater
– Oil temperature is controlled and set via main control
cabinet interface
After the heater, the fluid passes through the heart
of the ThermoJet, the dual stage Jet Mixer
The oil leaves the Jet Mixer and enters the
separation vessel
Processed oil is returned by the 2nd fluid pump

9. Principle of Operation (cont’d)
The key to the simple yet effective
operation of the ThermoJet is the dual
stage Jet Mixer
– As filtered and heated oil is passed through the
Jet Mixer air is added and mixed with the oil
– This mixing increases the air / oil surface
interface
– The increased surface area allows the ‘heated
water’ to efficiently evaporate into the air
pockets or bubbles
– The air / oil mix flows into the separation tank
and under reduced pressure the air / water or
gas vents to atmosphere

10. ThermoJet – Key Components (Front)

11. ThermoJet – Key Components (Rear)

12. ThermoJet - Features & Benefits
Stand alone system, requiring inlet / outlet
fluid connection and power supply
Minimal maintenance – Plug & Play
In-built heater with adjustable thermostat and
safety controls to protect fluid
Designed to operate on fluids from 32cst to
220cst
Can be used on fire resistant fluids

13. ThermoJet Options
The N2000E is the standard industrial
version of the ThermoJet range
– Designed for non-hazardous areas
The G3000 is specifically designed for
hazardous areas
– Used in Petrochemical refineries around the
world
Various options can be incorporated in the
basic Thermojet design including:
– Advanced filtration
– Mobile unit mounted on four wheel trolley

14. Lubrication Engineers Pty Ltd
Lubrication Engineers Pty Ltd
Contact information:
sales@lubeng.com.au
Ph: +61 2 9636 5655