1. MAKING OF ROBONGIERS Design Journey

3. Wearing clothes

4. What to eat at a restaurant

5. Shopping

6. Preparing food

7. Creating or Making something

8. Thefour main attributes to design are

9. Investigate

10. Plan

11. Create

13. The initial designs of the trophies Inspiration was a Gyro Scope Gyro scope is a device that balances the structure it is integral to Robotics The form was interesting, but we felt something wasmissing …probably a strong connection with the topic or the event.

14. The missing link was the NAME of the EVENT and a most importantly an identity of its own – a LOGO

15. The Name Hunt Creativity is at its best in young minds ….acknowledging that Middle School Students brainstormed on Possible names and this is what they came up with RobofestRoboconRobocomRefreshRobotechTechshopRoboshopRobowars Open mindRoboroboExperimentRobattles- (robot battle)ScrewbotRockbotMachimaRobodex- (robot Dexter) Bloobots(blooming robots)Thinkbots TechnobotRobopps- (robo operations)RobowareTechbot Dexbot- (Dexter robot)RobongiersBotnologicRobotica RobotiaRobotonica The hunt got over with a name ROBONGIERS = Robot + Engineers

16. The Name Hunt Was Over and the LOGO HUNT began….

18. This wasn’t the end…after a lot of debate the FINAL LOGO that came into existence is…….

19. Black & White Version of the LOGO…

20. Colour Version of the LOGO…

21. The forgotten story of the TROPHY will start now….

22. Creation of the Trophy… The journey started again but this time it was more clear and well defined and so designing the trophy looked easy… So I decided to go with a flow and to keep the elements of the logo in the trophy ( to make my job easier)….. The best way to retain uniformity was to play with the form of a gear as its already there in the logo… And keeping the logo in the trophy was the basic rule to make it much more relevant to the overall theme…

23. And so the First Draft of TheTROPHY was created….

25. The Logo inside is not Visible

26. The base of the trophy is not so pleasing as it isbreaking the visual continuality.

27. The nut bolt on the trophy looks unique but at the same time are distracting

28. The transparent surface has an engraved logo but the logo might get damaged so cant keep it exposedAnd so the second draftwas made to overcome present flaws…

30. The engraved logo is protected as it has a protecting layer

31. The base looks more aesthetically pleasing

32. The bolts are not disturbing.And the design got approved and it was time to finalize the optimum size….

33. So one more MOCK-UP was created to check the size….

35. The proposed bolts of this size will be disturbing and so cant keep them this big

36. The base on which the vertical gear is installed needs to be elevated

37. The most important thing How will it balance?

38. How to fix the vertical gear to the horizontal one? Then to check these issues one more mock trophy was created … Made of Cardboard

40. The vertical gear is slightly tilted to make it stable and strong.

41. The elevated base for the vertical gear is at a perfect height.

42. The base of the vertical trophy is visible, so either the base should grow high or the vertical gear should go down.

43. Still incomplete as the event logo and school logo is not created to evaluate the whole thing.First sample using MDF Board

45. The frame outside is aesthetically pleasing

46. The logo inside doesn’t look compact

47. Even the school logo is not so visible and wont be visible if seen from the front

48. The visibility of the two logos is the main concern.

49. How to distinguish between a runners up trophy and a trophy for the first position

52. the logos are very visible due to its proper positioning

53. The bolts are not disturbing the view.

55. The Help of the Following … All Middle School Students Mrs. Narang Mrs. Sharma Bodh -Lenovo Thinkpad ( My Computer) -Coral Draw 11 -Epilog Mini Helix ( Laser Cutter) Thanks a lot ….. Dasharha Sevak Design & technology