A comprehensive and very simple to use POS solution for Petrol-pump with Invoicing (40/80 Column), Accounting and Inventory Management with back office and statutory requirement and modules for Meter Reading with Unlimited Nozzles/Tanks, Auto Dip from Calibration Chart, Integrated & Online Ledger, Product / Stock Ledger & Stock Movement,
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Installation Procedure for Quicksoft Petrol-pump Management Software
1. Installation Procedure
Insert Installation CD & Explore/Open the CD. Just Run the
Setup from the Package folder and follow the instruction given
below:
If you do not have the installation CD. then you can also
download the software from
http://www.quicksoftservices.com/download or
http://www.quicksoftservices.com/inf_download.aspx and
Follow the instruction given in the next slide to download.
2. Select the Item to download by clicking the radio button shown above
3. Click on
Scroll-bar
to Scroll-
down and
fill the form
at the
bottom of
the page.
After filling the form Email ID and Verification Text, Click on
Download button to Download the chosen item. Repeat the
same process to download Reports, Manual,etc.,
4. You may extract the Files from zip using “winzip” or “winrar”
software either by clicking “Extract here” or “Extract to Folder”
5. Just Run the Setup from the Package folder in the Installation CD or
locate the folder where you have extracted the files from package.zip.
Just Double Click On Setup.Exe to Run Setup
and the Installation Will Start . . . . .
6. Select OK To Proceed Further Or Exit Setup For Exit.
When you Press OK in the above screen, then the Screen in the
next slide will appear. This allows you to install the software at the
location other than default location.
7. In case, when the User wish to change the Path then he/she can do
so by clicking On the Change Directory Button.
To continue setup Press the Computer Icon / Setup button
displayed on the top-left corner of the screen.
8. Then following screen will appear to allow you to select the
Program Group under which the shortcut is to be created or
create new program group.
Just Press Continue to proceed with Installation.
9. Just Click on “Yes” button whenever you see this type of message
appearing on your screen.
10. At any stage during the Installation, if you see any message like
problems registering file with the computer (for e.g.
MSADO21.TLB), as shown below then just Ignore them to continue
the Installation.
On Clicking Abort Button Installation will be aborted, Retry Button if
Clicked, will again try to register the same file, and if it fails again,
the same message will appear On The Screen Again,
Therefore it is suggested to Click On Ignore to Proceed Further.
At the end the software will display the message as
“ArtRM for Petrol Pumps Setup was completed successfully”.
11. How to Run the Software?
• After Completion of Installation of the Software,
• Copy the “ArtRM.exe” (application) from the root folder of the CD or from the
recently extracted software folder to C:Program FilesArtRM folder to
update the latest version with the Default version installed in the above
folder.
• (C:Program FilesArtRM is the default folder in which by default the
software gets installed unless changed by user at the time of installation.)
• Copy the Reports folder to C:Program FilesArtRM folder. Make sure all
the *.rpt files contained in Reports folder are available in the C:Program
FilesArtRMReports Folder.
• Run the ArtRM from C:Program FilesArtRM folder or Click on
• Start->Programs->Quicksoft ArtRM ShortCut created in Programs section.
12. Next Just follow the Users Manual to create the necessary master
and instructions for daily entry in chronology as specified.
You may download users manual, software update or reports from
http://www.quicksoftservices.com/download
Or email your queries to info@quicksoftservices.com
Thank You.