2. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 2 of 13
SHYAMAL DESAI R J DESAI
OUR ESTABLISHMENT
A dynamic organization, Priyank Engineering is a full-service manufacturer
and exporter of sheet metal parts, sheet metal fabricated parts, sheet
metal pressed & stamped components for original equipment
manufacturing applications in almost all industries.
A name to reckon with, Priyank Engineering is An ISO 9001: 2008 Company
engaged in manufacturing precision pressed and stamped sheet metal components,
precise sheet metal fabricated assemblies which are widely used in the industries
like electrical switch-gears, textile machineries, fuel dispensing pumps, consumer
electronics, automobile and other general engineering industries. The installed
facilities are versatile & are capable of manufacturing products as per the
specifications of the customers.
We are engaged in manufacturing products that not only meet our customers
specification but also surpass their expectations. Our array include Sheet Metal
Parts, Sheet Metal Fabricated Parts, Sheet Metal Articles, Metal Stampings, Pressed
Component, Powder Coated Parts, Shims & Washer, Flanges for timing pulleys,
Metal Pressings, Press Work, Switch Gear Parts, Mounting, Clamping & Supporting
Parts and Security Seal (metal) press tools. We provide Sheet Metal Parts for the
following industries.
Achievements
More than just being a metal fabricating company, Priyank Engineering partner with
customers, providing innovative and cost effective products that achieve
competitive and strategic market advantages for the customers. We had achieved
ISO 9001:2008 by M/s Bureau Varitas Certicication for designing of toolings and
manufacture of sheet metal parts.
3. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 3 of 13
SHYAMAL DESAI R J DESAI
Company Details
Location Verification
Name: Priyank Engineering
Address:
14-A, Jaylaxmi Estate,
CMC Compund, Sonini Chali,
Odhav GIDC, Ahmedabad-382415
Gujarat, India,
E-Mail Address :- info@sheetmetalarticle.com, priyank_eng@yahoo.co.in
Contact Telephone(s): +91-079-22974631,22974635,
Statutory Registration
S.S.I. NO. 24-007-11-05660 Dt 27-01-2001
Income Tax Registration: PAN No:- AACFP4700A
Central Sales Tax No: 24575104211
State Sales Tax No: 24075104211
EXCISE REGISTRATION: ECC NO.AACFP4700AXM001
Import Export Code (IEC): 0806015420
ISO 9001 : 2008 FOR PRESSTOOLS, SHEET METAL PRESSED
STAMPEED AND FABRICATED COMPONENTS
CERT NO. IND 92035 DT 10 APRIL 2009
D&B D-U-N-S ® NUMBER AND RRATING 86-280-8116, RATING : SE3B DATED 25 NOV 2011
Other Details
Year of Establishment: 1995
Legal Status of Firm: Partnership Firm
Person to Contact Technical :- Mr. R.J.Desai ( Mo 9879042241)
Mr. Rajdeepbhai Desai (Mo 9426443030)
Commercial :- Mr. Shyamal Desai (Mo 9998843356)
4. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 4 of 13
SHYAMAL DESAI R J DESAI
QUALITY POLICY
“PRIYANK ENGINEERING” is
committed 100% customer satisfaction
by providing consistent, reliable and cost
effective Sheet Metal Pressed, Stamped &
Fabricated Components and Press Tools.
We will achieve this:
By implementing ISO 9001:2008 Quality Management
System.
By identifying and fixing suppliers capable of supplying
qualitative Raw Materials.
By continually improving our products & processes based
on analysis of data.
By optimising our 5M resources like; Man, Machine,
Material, Measurement & Method.
5. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 5 of 13
SHYAMAL DESAI R J DESAI
6. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 6 of 13
SHYAMAL DESAI R J DESAI
General Engineering Parts
Precision Engineering Parts
7. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 7 of 13
SHYAMAL DESAI R J DESAI
Textile Machinery Parts
Fuel Dispansing Pump Parts
8. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 8 of 13
SHYAMAL DESAI R J DESAI
Consumer Electronics Parts
Electrical Switchgear Parts
9. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 10 of 13
SHYAMAL DESAI R J DESAI
Manufacturing Facilities
Production:-
Sr No Machine / Equipment Capacity Qty
1 Power Press 75 Tones 1 NO
2 Hydraulic Sheer 8 Feet 1 NO
3 Press Brake ( Hydraulic ) 4 feet 1 NO
4 Power Press 50 Tones 1 NO
5 Power Press 30 Tones 1 NO
6 Power Press 20 Tones 3 NO
7 Power Press 10 Tones 3 NOS
8 Deep drawn Press 60 Tones 1NO
9 Hand Press No-6 1NO
10 Hand Press No-1 1NO
11 Bench Grinder 1 inch 2 NOS
12 Spot welding M/c 15 kva 1 NO
13 Hand Sheer 18 inches 1 NO
14 Vibrating Finishing M/c 50 Kg 1 NO
15 Arc Welding M/c 300 amp 1 NO
10. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 11 of 13
SHYAMAL DESAI R J DESAI
Tool Room
1. Computer Aided Designing System CAD 2 Station
2. CNC Wire-cut EDM OMNI CUT 1 NOS
3. Surface Grinding Machine 225 mm x 450mm 2 NOS
3. Centre Lathe 4.5 Feet 1 NO
4 Pillar Drill 3/4 Inch 3 NOS
5 Pillar Drill 1/2 Inch 2 NOS
6 Pillar Drill 1 Inch 1 NO
7 Power Hacksaw 9 Inch 1 NO
8 Bench Grinder 3/4 Inch 3 NO
9 Surface Plate 450 mm X 600 mm 2 NOs
10 Universal Milling M/c 450mm x 250mm 1 NO
11. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 12 of 13
SHYAMAL DESAI R J DESAI
Certification
12. PRIYANK
ENGINEERING
Doc. No: PE/RMC/01 Issue No.: A1/2011 Issue Date : 1st
April, 2011
PRIYANK ENGINEERING
Rev. No: Rev. Date:
Prepared & Issued By: Approved By:
Page 13 of 13
SHYAMAL DESAI R J DESAI
Rating
