Multech is a PCB manufacturer who committed to technological innovation in electronics industry, manufacturing pcb boards and supporting electronic devices and their circuit applications of enterprises, helping the world’s electronics industry to improve energy efficiency.

1. Multech Electronic Limited
Multech Electronic Limited is a Chinese PCB manufacturer which founded in 2003, in 2010 we invest new
factory in a mainland town Xinfeng, Jiangxi province in order to make cost lower. We have 120 staff and our
production capacity is 10,000 sq meter per month. We are ISO9001 certificated and UL approved. Now we have
customer from China, Europe, USA, Japan, etc. Welcome to cooperate we’ll provide you a good service.
Our advantage:
A. Very competitive price
B. Fast lead time from 2days
C. Perfect service and good relation ship with customer
D. Good quality.
Business Philosophy:
Mission: To become a leading PCB manufacture in China. Customer’ satisfaction is more important than
profit. Keep good quality and on time delivery is essential to satisfy clients.
To do right the first time and do right every time.

2. Every one is important in the team, employees are the heart and soul of our company, we try to make every
one satisfied so that they can make our clients satisfied.
Young But Experienced Team Quality Audit Staff
Product Show:
We can manufacture PCB from single sided to 24 layer in house.

3. FR-4 Single side PCB Double side, panel no x-out
Roger 4 Layer PCB Blue Solder Mask
10 Layer Immersion Gold Aluminum PCB
Heavy copper Back board 6.0mm thicker
Production Line:

4. E-test Drilling
Plated Through Hole Image Transfer
Pattern Platting Etching
Brush Hot Air Levering
Quality Control:
Our company is ISO 9001 certificated and UL approved, all of PCB are manufacturing under a stable
management.

5. Quality Policy:
Quality is commercial integrity 1% defect may brings
100% disaster for customer. Our management goad is to make
client 100% satisfied. Offering perfect products is essential to
satisfy clients.
Quality Goal:
Rate of customer complaints: 0.5%
Rate of customer satisfaction: 99.5%
We ensure:
We use good brand base material and solder mask
In order to increase the reliability and performance, we never use local and
unknown brand supplier.
Enough copper thickness inside hole
Since some of our customer has complained the problem of les copper, we have improved and
pay more attention the copper thickness inside hole.
It’s important because we know if not have enough copper inside hole it will increase the risk of
electrical continuity problems (blow hoes, out gassing, inner layer separation, barrel cracking)
We platted to 25 um on normal board.
No short or open circuit repair
Poor repair can actually lead to open circuits being supplied. Even a “good” repair has risk of failure under
load conditions (vibration etc.) leading to potential field failures.

6. No x-out board require are accept
Special set-ups are necessary for each panel with a defect, and if the x-outs, are not clearly marked or not
sepregated from the main delivery, there is a risk of assembling a known bad board, waste of components and
time.
It is possible to deliver PCB on time with zero defects.
Our Capability:
Item Capability
PCB Layers 1-24 Layers
Base Material
FR4,CEM1,CEM3,ALU,FR2,FR1,Polymide,
Rogers,Arlon,Teflon
Copper Thickness 0.5-6 OZ
Impedance Control Yes
Peeable Mask Yes
Min.Line Width 0.08mm
Min.Line Spacing 0.08mm
Min.Annual Ring PTH 0.15mm
PTH 0.20mm±0.05mm
Non-PTH 0.15mm±0.05mm
Hole Aspect Ratio 10
Singel&Double side 0.2mm
Min.Board Thickness Multilayer(4,6,8,10
layer)0.4mm,0.55mm,0.8mm,0,8mm
Max Board Sixe 600*900mm,400*1200mm
Solder Mask Pitch 0.1mm
Outline Tolerance ±0.15mm
V-CUT Tolerance ±0.10mm
thickness Tolerance MIL-P-13949 Class 2
Gold Finger 5u"-50u"
Surface Finish
HASL,LF HAL,Immersion Gold,Immersion silver,
Flash Gold,Flux Coat&OSP
Special Capability
Burial/blind vias,Impedance Control,via plug,
BGA,Gold Finger
Test Fly probe test,E-test,Inspection AOI test
Certificate RoHS,ISO9001:2000,ISO14001:2004,SGS,UL
Contact Us
Tel: +86-0755-27821591/27821592
Email: info@mul-tech.com / sales@mul-tech.com

7. Address:
Room 4F-09, Baotong building, Baomin Rd, Ban’an district, Shenzhen,Guangdong, China, 518133
Website: www.mul-tech.com