Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates

•

0 likes•229 views

sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Business

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack
Screw Jack For Raising and Lowering Sluice Gate
Important Components:
1. Heavy duty and self lock screw jack. Special requirements stainless steel jack
2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction
mechanism.
3. Limit switches or prevent overtravel limiter for control full extension and retraction travel
stroke, which installed on steel protective pipe cover.
4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when
full retraction stroke.
Other Features:
1. Inverted type installation, tension load.
2. Translating screw with female thread cylinder rod clevis end.
3. Low speed gear ratio screw jack with gear reduction mechanism geared motor.
4. Lifting screw total length = required stroke + foundation beam thickness + jack housing
height + screw top end length.
5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements.
6. Selection screw jack, should consider gate sizes, self weight, water pressure force,
water impulsive force.
7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500
mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm,
6000 mm. Please note, longer travel stroke slower travel speed.
Customers Used Screw Jacks Models:
1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.
2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.
3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum
tension lifting force, inverted mounting screw jack, translating screw configuration, long
travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter,
protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit
switches.

Jacton Electromechanical Co.,Ltd | Tel: +86 (0)769 81585852 | Fax: +86 (0)769 81620195
Email: sales@screw-jack.com | Web: www.screw-jack.com | Skype: jactonjack

What's hot

A new range of PSC Hands-off safety tools(lift assist manual lifting aids), it prevents back pain problems from bending, and simultaneously improves ergonomics in workplace. It also reduces possible chances of hand and finger injuries associated with lifting carrying the small equipment with bare hands. The manual lifting aids are used with chicksan and bop choke valves, pup joints, fishing tools, pipe, tubing, deck cargo etc.

PSC Lift-Mate Manual Lifting Aids

Project Sales Corp

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn screw thread actuator lift, 50000 lbs worm screw actuator, worm gear screw actuator, worm gear linear actuator features: 1. Maximum load capacity 20 ton, maximum torque 228 Nm. 2. Lift screw diameter 65 mm, pitch 12 mm. 3. 8:1, 24:1 gear ratios 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both. 7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2250 mm/min and 750 mm/min. 8. No standard lift screw stroke, maximum travel stroke 3000mm when tension load. 9. Top plate, clevis end, plain end and threaded end are available. 10. Individually or multiple screw jack lift system arrangements are available. 11. Applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry. 12. Customers,distributor,agent,retails,branches are distributed throughout the world such as New Zealand, Australia, Spain, UK, France, Ireland, Belgium, Germany, Netherlands, Switzerland, Austria, Italy, Sweden, Finland, Poland, Denmark, Czech Republic, Russian Federation, Armenia, Hong Kong, India, Indonesia, Iran, Iraq, Israel, Japan, Korea, Kuwait, Malaysia, Pakistan, Philippines, Russia, Saudi Arabia, Singapore, SriLanka, Taiwan, Thailand, Turkey, United Arab Emirates, Vietnam, Yemen, Brazil, Chile, Canada, Mexico, USA, Egypt, Zambia, Mauritius, South Africa.

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...

Jacton Electromechanical Co.,Ltd

CHAIN-PRODUCT- USA-FOLLETO

villaallendemagazine

Kubota l3130 tractor service repair manual

fjskekazswdmme

Kubota l3430 tractor service repair manual

fhhsjdkmem

This is the Highly Detailed factory service repair manual for theKUBOTA L4630 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KUBOTA L4630 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly. Service Repair Manual Covers: General Engine Clutch Transmission Rear Axle Brake Front Axle Steering Hydraulic System Electrical System Cabin File Format: PDF Compatible: All Versions of Windows & Mac Language: English Requirements: Adobe PDF Reader NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKUBOTA L4630 TRACTOR Service Repair Workshop Manual. Looking for some other Service Repair Manual,please check: https://www.aservicemanualpdf.com/ Thanks for visiting!

KUBOTA L4630 TRACTOR Service Repair Manual

fusefjjjsekkemd

manual screw jack with hand wheel operation adjusting upper rolls in Coil Processing Sheet Slitter Line.Two worm gear screw jacks are connected by a line shafting, a 8" diameter hand wheel manual adjustment upper rolls in the vertical plane to permit synchronized roll penetration into the material to be achieved from the operator side of this machine, and all lower flattening rolls and pinch rolls are fixed. Two worm gear screw jacks model JT-3T-IS-300-H-II-C-PP/HW, maximum load capacity 3 ton, inverted translating screw type, 300mm(12") travel stroke, high gear ratio 1/6, clevis end, double input worm shaft, additional protective pipe for dust-proof and 8" diameter hand wheel.

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

Jacton Electromechanical Co.,Ltd

5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...

Jacton Electromechanical Co.,Ltd

Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet

Thorne & Derrick International

Ring spinning-BSL

Rajeev Sharan

Torque systems ms400_specsheet

Electromate

TS-04A 150X20mm WPC outdoor decking

威小

Webtools SL55 Softline Cutters - Data Sheet

Thorne & Derrick International

What's hot (13)

PSC Lift-Mate Manual Lifting Aids

Jtw 20 t worm screw jack, 20 ton linear actuator lead screw jack, 200 kn scre...

CHAIN-PRODUCT- USA-FOLLETO

Kubota l3130 tractor service repair manual

Kubota l3430 tractor service repair manual

KUBOTA L4630 TRACTOR Service Repair Manual

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

5 ton machine screw jacks, 20 ton upright translating screw jacks for lift di...

Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet

Ring spinning-BSL

Torque systems ms400_specsheet

TS-04A 150X20mm WPC outdoor decking

Webtools SL55 Softline Cutters - Data Sheet

Similar to Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates

solar tracking screw jack, ball screw jack applications solar panels, solar screw jack, screw jack type solar tracker motor, solar jacks and actuators regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar tracking screw jack, ball screw jack applications solar panels, solar s...

Jacton Electromechanical Co.,Ltd

solar actuators and motorized jacks, solar tracking jacks and actuators, solar tracking drive jacks, solar tracking drive actuators, self-locking powered actuators regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar actuators and motorized jacks, solar tracking jacks and actuators, sola...

Jacton Electromechanical Co.,Ltd

solar jacks type, solar panel positioning gears jack, solar tracker jack with ball joint, uses of solar power screw jack, screw jack for solar panel tracking system mechanism regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar jacks type, solar panel positioning gears jack, solar tracker jack with...

Jacton Electromechanical Co.,Ltd

Worm screw jack for solar trackers, solar tracking machine screw jack actuators, electric lightweight scew jacks solar tracking, self positioning solar panel jack regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Worm screw jack for solar trackers, solar tracking machine screw jack actuato...

Jacton Electromechanical Co.,Ltd

solar panel adjustment jack, solar panel tracking using screw jacks, solar tracker linear actuator, solar system screw drive, solar positioning system screw jack regular screw jack model: JT-10T-US-1500-L-II-M1-PP/BB/GM/LS/SP 10ton static lifting force, upright type jack, translating screw configuration, customized threaded end matches female rod end (clevis end), exact 1200mm travel length (1500mm = travel stroke + bellows boot full retraction length + swivel plate thickness), low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism. Optional JT-10T-UK-1500-L-IV-M1-PP/BB/GM/LS/SP, 10ton static lifting force, upright type jack, anti-rotation keyed screw configuration, threaded ends with ball joint rod end bearing, low worm gear ratio 1/32, left side flange adapter, protective pipe, bellows boot, geared motor, limit switches and swivel plate. Normaly, using 24 volt DC gear motor driven screw jack, travel speed from 150mm/min to 300mm/min with gear reduction mechanism.

Solar panel adjustment jack, solar panel tracking using screw jacks, solar tr...

Jacton Electromechanical Co.,Ltd

Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...

Jacton Electromechanical Co.,Ltd

Mini manually operated screw driven jacks, lightweight screw jacks, light dut...

Jacton Electromechanical Co.,Ltd

Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features 1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed). 2. Lifting screw diameter 16 mm, pitch 4 mm. 3. High gear ratio 1/4, low gear ratio 1/16. 4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations. 5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor. 7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length. 8. Lead screw end fittings include top plate, clevis end, plain end and threaded end. 9. Individually or multiple screw jack lift system arrangements are available. Applications Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.

Miniature linear screw adjustment, lightweight gear drive lifting, lightweigh...

Jacton Electromechanical Co.,Ltd

Mini worm gear screw jack, mini machine screw jack, micro worm drive lifting ...

Jacton Electromechanical Co.,Ltd

Mini screw jack lifting, micro worm gear screw lifter, micro screw jacks, min...

Jacton Electromechanical Co.,Ltd

Micro lift jack, small screw jacks, 2.5kn mini worm gear screw jack, mechanic...

Jacton Electromechanical Co.,Ltd

Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...

Jacton Electromechanical Co.,Ltd

Light weight screw lift equipment, 16mm screw jack gearbox, micro motor screw...

Jacton Electromechanical Co.,Ltd

Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...

Jacton Electromechanical Co.,Ltd

Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...

Jacton Electromechanical Co.,Ltd

Smallest cubic screw jack, miniature wormgear screw jack, 2.5kn cubic screw j...

Jacton Electromechanical Co.,Ltd

Mini screw lift jack, miniture lifter mechanism, light duty gear jack, light ...

Jacton Electromechanical Co.,Ltd

Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...

Jacton Electromechanical Co.,Ltd

electric screw jack gear hoist raising lowering sluice gate of canal

Jacton Electromechanical Co.,Ltd

machine screw jack,electric machine screw actuator,electrical mechanical actuators,manual actuator lifts features: 1. Lifting force 2.5kN to 1000kN. Under max. lifting force, input shaft required torque, high ratio 10.83Nm to 2040Nm, low ratio 0.42Nm to 1278Nm. 2. Machine screw diameter 12 mm to 150 mm, screw pitch 3 mm to 20 mm. 3. Worm gear ratio 1/5 to 1/36. 4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation. 5. Heavy duty, precision positioning, self-locking machine screw, low efficiency, low frequency, low travel speed, low duty cycle. 6. electric machine screw jack by 3-phase or single phase electric motor/gearmotor, manual machine screw jack by handle/crank. 7. Machine screw ends include top plate, clevis end, plain end and threaded end. 8. Individually or multiple machine screw jack lift system arrangements are available. 9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.

machine screw jack,electric machine screw actuator,electrical mechanical actu...

Jacton Electromechanical Co.,Ltd

Similar to Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates (20)