For more information on this product and more products like it visit - http://www.isbengineering.co.uk/products/plough-share-mixers/engineering-plough-share-mixer-product.html

1. ISB MODEL 1050 PLOUGH SHARE MIXER
Product Description/Purpose
The ISB model 1050 plough share mixer can be
supplied made from mild or stainless steels. There is
also a choice of variable or fixed speed drives, these
may be mechanical or electrical.
The raw materials are fed into the mixing chamber
through the top. Efficient mixing action is then
carried out by the ploughs by moving the product
from one end of the mixing chamber to the other
turning and throwing at the same time. The ploughs
run with a close tolerance to the mixing chamber wall
this helps to stop a build up of
material.
Sometimes with difficult to disperse products, such as
colours, one or more high speed cutters are fitted, the
product is moved by the ploughs over the cutters and
is finely dispersed.
SPECIFICATION
Power supply - 415v and neutral
Volume - 500L
MAINTENANCE
The ISB 1050 plough share is easy to maintain, the bearings and seals require regular greasing
and servicing and as for general cleaning down of the mixing chamber, access is gained in
seconds by removing the interlock key from the control panel releasing the clamps and opening
the mixing chamber access door.