How to Troubleshoot Apps for the Modern Connected Worker
Combo Poly Control Kit Lock and Wired Pad
1. Programming and setting up the Poly-Combo without a
gateway
The Poly-Combo has a default master pin number 9889
To change any pin numbers you will have to change the master pin
number.
To make a new master pin number press:
Open – Open – Master pin number (first time it is 9889) – Open –
New master pin number – Open
Check if the pin number works, other do the process again
Now you are able to change and make new pin numbers.
The Keypad can hold up to 99 user codes, from 1-99
The pin numbers can be 4-10 digits
You can administrate this directly from the Keypad or from your
gateway
To make a new pin number:
Lock – Lock – Master pin – Lock – place for new pin (1-99) – Lock
– new pin – Open
Delete Pin:
Open – Open – Master pin – Lock – Place of pin (1-99) – Open
Security:
If a wrong pin number in pressed 5 times the keypad locks.
Meaning that you are not able to use the keypad for 5 minutes
afterwards.
Deactivating within the 5 minute delay:
Open – Lock – Master pin – Open
To put the keypad back to factory default:
Lock – Lock – Master pin – Open
For more instruction, look at the user guide for Poly-Lock and Poly-Pad