• Like
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
297
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
0
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. Tropos 5210 and 5320 Series Routers Installation Instructions for the Downward Antenna Bracket Kit The downward antenna bracket kit is used to mount downward facing antennas for the Tropos 5210 and 5320 series routers. Follow these instructions to install the bracket kit. For complete Tropos router installation instructions, see the Tropos 5210 Series MetroMesh Router Installation Guide or the Tropos 5320 Series MetroMesh Router Installation Guide. 3 1. Align the antenna bracket with the four protruding screw holes that are on the bottom of the router. 4. Attach the antennas to the connectors on the bottom of the bracket. 2. Use four #10-32 hex screws to attach the bracket to the router. – If you have installed the bottom shell for solar load protection, use the 1/2-inch screws. 3. Attach the antenna extension cables to the antenna ports on the top of the router. 4 1 – If you have not installed the bottom shell kit, use the 3/8-inch screws. 2 trp_187 Tropos Part Number 200230-00, Rev A0 1