Certain Accent, i30, Elantra, i40, Veloster, ix35 and Santa Fe vehicles may experience peeling of the steering wheel leatherette cover. This technical service bulletin provides an updated procedure to rectify this by replacing just the steering wheel body rather than the complete steering wheel assembly. The bulletin details the affected vehicle models and production dates, required parts, operation codes and times, and service procedure for replacing the steering wheel body on Santa Fe and Elantra vehicles. Technicians are instructed to check for this condition and replace the steering wheel body if peeling is present.

1. Please ensure this bulletin is read and initialled by: -
Service / Parts
Manager
Warranty
Officer
Foreman /
Leading Hand
Technicians
SE03513 Page 1 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA, and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
RREEVVIISSIIOONN NNOOTTIICCEE::
TThhiiss TTSSBB hhaass bbeeeenn rree--iissssuueedd aanndd ssuuppeerrsseeddeess TTSSBB SSEE0022991133,, ttoo aaddvviissee ooff tthhee
ffoolllloowwiinngg cchhaannggeess::
 AAffffeecctteedd VVeehhiiccllee iinnffoorrmmaattiioonn hhaass cchhaannggeedd
 PPaarrttss RReeqquuiirreedd iinnffoorrmmaattiioonn hhaass cchhaannggeedd
 OOppeerraattiioonn CCooddee && TTiimmee iinnffoorrmmaattiioonn hhaass cchhaannggeedd
PPlleeaassee ddiissccaarrdd tthhee pprreevviioouuss TTSSBB..
1. DESCRIPTION
Certain Accent (RB), i30 (GD/GDe), Elantra (MD), i40 (VF), Veloster (FS),
ix35 (LM/EL) and Santa Fe (CM) vehicles may experience peeling of the
steering wheel leatherette cover coating.
This bulletin provides the procedure to rectify the concern by replacing the
steering wheel body only. Previously, the complete wheel was only available.
For vehicles experiencing this condition, replace the steering wheel body
assembly following the Service Procedure below.
2. AFFECTED VEHICLES
Models: Accent (RB)*, i30 (GD/GDe)*, Elantra (MD)*,
i40 (VF)*, Veloster (FS)*, ix35 (LM/EL)*,
Santa Fe (CM)*
*fitted with leatherette steering wheel only
Affected production date range: RB, GD, MD, VF, FS, CM:
January 2008 ~ June 2012
GDe, LM/EL:
1st
production ~ December 2012
Technical Service Bulletin
Hyundai Motor Company Australia ABN: 58 008 995 588
394 Lane Cove Road Macquarie Park, NSW, 2113 P: (02) 8873 6444 F: (02) 8873 6326
Model:
Accent (RB), i30 (GD/GDe), Elantra (MD), i40 (VF),
Veloster (FS), ix35 (LM/EL), Santa Fe (CM)
Issue Date: 30th
Aug 2013
TSB Type: Field Fix
Campaign
Number:
- TSB Number: SE03513
Group: Body Interior
Parts
Availability:
Refer to
Parts Dept.
Supersedes: SE02913
Subject: [Revised] Steering Wheel Peeling - Body Replacement – [F/Fix]
It is important to check all Hyundai vehicles for outstanding campaigns whilst in your
dealership. Campaign information can be checked on the GWMS.
NOTE:

2. SE03513 Page 2 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
3. PARTS REQUIRED
A: Former (complete wheel) B: Current (body only)
Model
PART NUMBER
Colour OptionFormer
(Complete Wheel)
Current
(Body Only)
Accent
(RB)
561101R2159Y
561111R103RYFFF Black Leatherette
561101R2189Y
561101R215RY
561101R218RY
i30
(GD)
56110A5430MGB
56111A5800RYFFF Black Leatherette56110A5330RDR
56110A5430RDR
i30
*(GDe)
56110A6830RDR 56111A6200RDRFF Black Leatherette
Elantra
(MD)
561103X750RY
561113X700RYFFF Black Leatherette561103X451RYZ
561103X751RYZ
i40
(VF)
561003Z230RY
561113Z200RYFFF Black
Leatherette
561003Z530RY
561003Z534RY
561003Z630RY
561003Z530HZ 561113Z200HZFFF Dark Brown Black
Veloster
(FS)
561102V550RSD
561112V100RYFFF Black Leatherette
561102V710RSD
561102V550RY
561102V710RY
NOTE: *(GDe) denotes Czech (HMMC) built i30
A B

3. SE03513 Page 3 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
Model
PART NUMBER
Colour OptionFormer
(Complete Wheel)
Current
(Body Only)
ix35
(LM)
561102S6509P 561112S4009PFFF Black Leatherette
ix35
*(EL)
561102Y6559P 561112Y1009PFFF Black Leatherette
Santa Fe
(CM)
561002B538WK
561102B100WKFFF Black
Leatherette
561002B588WK
561002B249HZ
561102B207HZFFF Dark Brown Black
561002B252HZ
561002B320HZ
561002B340HZ
561002B345HZ
561002B410HZ
561002B440HZ
561002B445HZ
NOTE: *(EL) denotes Czech (HMMC) built ix35
4. OPERATION CODE AND TIME
OP Code Model OP Name OP Time Nature Cause
56100F03 RB
STEERING WHEEL
BODY REPLACEMENT
0.8 M/H
*N52 **C06
56100F01 GD 0.7 M/H
56100F09 GDe 0.7 M/H
56100F00 MD 0.7 M/H
56100F05 VF 0.7 M/H
56100F02 FS 0.8 M/H
56100F12 LM 0.5 M/H
56100F11 EL 0.5 M/H
56100F06 CM 0.5 M/H
*N52 Dirty, Stain
**C06 Broken / Split / Torn

4. SE03513 Page 4 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
5. SERVICE PROCEDURE
NOTE: In reference to the replacement procedure, this bulletin provides the service
procedure for Santa Fe (CM) and Elantra (MD) only. For further information refer to the
applicable Shop Manual.
1) Confirm that the steering wheel leatherette
cover coating is peeling.
A: Peeling leatherette cover coating of
steering wheel
2) Only for vehicles that exhibit this condition
replace the steering wheel body assembly
with the new one according to the service
procedure below.
# SANTA FE (CM)
1. Remove the driver’s airbag module and the
steering wheel assembly (B) referring to the
applicable Shop Manual.
2. Remove the steering wheel under cover
mounting screws (C).

5. SE03513 Page 5 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
3. Disconnect the steering wheel remote
control switch connectors (D) and (E)
on both sides.
4. Separate the under cover assembly
from the steering wheel body.
F: Steering wheel under cover assembly
5. Remove the steering wheel remote control
switches (H) by unfastening the mounting
screws (G).

6. SE03513 Page 6 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
NOTE:
The removed under cover (F) and the
steering wheel remote control switches (H)
must be re-used.
6. Install the removed under cover and
steering wheel remote control switches to the
new steering wheel body (I).
7. Install the steering wheel assembly (J)
and all other removed components in
the reverse order of removal.
# ELANTRA (MD)
1. Remove the airbag module and the
steering wheel assembly (A) referring to the
applicable Shop Manual.

7. SE03513 Page 7 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
2. Remove the under cover mounting
screws (B).
3. Remove the mounting screws (C).
4. Disconnect all the wiring connectors (D)
from the under cover, then remove the
under cover assembly.
E: Under cover assembly

8. SE03513 Page 8 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
5. Remove the remote control switches (F)
from the steering wheel body.
6. Unfasten the steering wheel remote control
switch clips (H, I) and separate the mounting
brackets (G) from the steering wheel body.
Remove the steering wheel remote control
switch assemblies.
CAUTION
Be careful not to damage the clips (H, I).
J: Steering wheel remote control switch
assembly:
: Clips and brackets

9. SE03513 Page 9 of 9 HFE13-91-P052- MDGDFSRBBKVFCMLMFDeGDeJCEL
© HMCA 2013 – This Technical Service Bulletin is the confidential information of HMCA and for internal Dealer Use only.
No part of this TSB is to be published or reproduced without written consent of HMCA.
NOTE:
The removed under cover and the steering
wheel remote control switches must be
re-used.
7. Install the removed under cover and
steering wheel remote control switches to the
new steering wheel body (K).
8. Install the steering wheel assembly (L)
and all other removed components in reverse
order of removal.