Just like welding, cutting is also an important process in heavy duty industries. Cutting is an important procedure as the accuracy and the clean finish is important for any process. When a metal piece of solid thinness is cut,
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
About oxy fuel cutting machines
1. About Oxy Fuel Cutting Machines:
Just like welding, cutting is also an important process in heavy duty industries. Cutting is an
important procedure as the accuracy and the clean finish is important for any process. When a
metal piece of solid thinness is cut, the cutter must make sure that the machine used to cut is
as efficient to make a clear cut without any chip or cracked finish. Same ways metals sheets of
thinner thickness must be handled carefully. Therefore the importance of a proper cutting
machine is equally significant just like a welding machine. Among the other cutting machines,
Oxy Fuel Cutting Machines are one of the latest and let’s see about them in brief in this article.
Oxy fuel cutting is one such procedure which makes use of pure oxygen for the purpose of
cutting metal sheets like that of steel. The point behind the procedure is the oxygen that reacts
with the steel; this is where the reaction happens which gives rise to iron oxide. The
combustion process happens with the help of fire, which actually heats the steel to a high
temperature, which is calculated to be just about 1800 F. The 1800 F is the temperature at
which the pure form of oxygen used in the Oxy Fuel Cutting machine is made to flow in a
steady stream and this reaction is the one that creates the perfect cut.
Oxy Fuel Cutting Machines are nothing but metal cutting machines that work according to the
above procedure by having oxygen as their fuel. The important point to note down in this
method is that. These machines take help of the high-velocity, high-temperature that the
oxygen gas gives when heated. The cut is actually made because of the ionized oxygen gas
which falls out of the nozzle of the welding machine at a very high velocity. The velocity of the
ionized gas is the force that is behind the necessary heat that is provided to melt down the
metal sheet. The perfection of any cuts made out of this Oxy Fuel Cutting Machines is too high
and is the main reasons why technicians prefer these machines for cutting steel metal sheets.
2. It is not that we have just one single model of Oxy Fuel Cutting Machines in the market. There
are several kinds of Oxy Fuel flame Cutting Machines that are available in the market these
days and each has their own specialties. Portable cutting machines or plasma cutters, shape
cutting machines and profile cutting machines are some of the Oxy Fuel flame Cutting
Machine. If you were thinking that the Oxy Fuel flame Cutting Machine are fit only for cutting
steel, then you are wrong, you can even cute electrically conductive metals such as aluminium
and brass with the help of these machines. As the perfection of these oxy fuel machines is
higher they are widely available as shape cutting machines. These shape cutting machines are
in general used for the purpose of cutting metals into varied shapes as we desire like circular,
flanges, squares, rectangles, straight line and much more.
Source: http://www.everlastgenerators.com