2. 9ft Arc Remelt Furnace All components modeled in SolidWorks Rendering of assembled furnace created for marketing purposes Animation of furnace operation created in SolidWorks Motion. Animation shown in continuous loop at clients trade show booth
3. Client Logo Banner Electrode arm 9ft Arc Remelt Furnace All components modeled in SolidWorks Rendering of assembled electrode arm and company logo banner created for marketing purposes
4. Pull Out/Drag Out Device for Aluminum Extrusion Press Modeled in SolidWorks Designed to pull broken extrusions out of press Device has to pull back and lift out of way when not in use
5. Powered Roller Sections for Saw Table Exit Conveyors All components modeled in SolidWorks Roller sections designed to replace unpowered rollers Each section had to be self contained to allow for easy replacement in existing systems
6. Adjustable Lead out Table for Aluminum Extrusion Press All components modeled in SolidWorks New table designed so that front and back raise and lower independently Rear table lowers allowing front table to slide horizontally All movement hydraulically controlled
7. Adjustable TransitionTable for Aluminum Extrusion Press All components modeled in SolidWorks Transition table fills gap between lead out table and slat conveyor Table raises and lowers wit hand wheel Designed to fit on existing slat conveyor frame
8. Fan Housing in Coal Fired Power Plant All components modeled in SolidWorks Housing created from old pencil drawing so the structure could be analyzed by a structural engineer his structural analysis software
9. Wheel Orientation Device for CNC Machining Cell Modeled in Pro/Engineer Designed for wheel manufacturer to orient wheel properly before it enters the CNC cell Rocker system allows one wheel at a time into gripers that center wheel. Mechanism lifts and rotates wheel so sensor can locate wheel for machining
10. Flue Gas Duct Assembly for Regional Energy Company Modeled in Pro/Engineer Created to confirm new structural steel design (in red) with existing duct work. Allowed structural engineer to prove design to customer in less time than previous projects
11. Low Profile Lifting Mechanism for Aluminum Extrusion Press Lift Bed Modeled in Pro/Engineer Design was created with flexibility to test feasibility of concept Animated movie created to show client how design worked
12. Steam Turbine Disc Blade Modeled in Pro/Engineer Created with points imported from AutoCAD Blade shape finalized with Surfacing
13. Hot Gas Expander Fixed Stator Assembly Modeled in Pro/Engineer Blades created with points imported from AutoCAD Created holes in inner and outer rings at assembly using blade models. Allowed for greater accuracy of manufacture of holes
14. Modeled in Pro/Engineer Shapes created using Advanced Surfacing techniques, Sweeps and Curves, and Spinal Bend Levers for Luxury Door Hardware
15. Coat Hook and Door Pull for Luxury Door Hardware Modeled in Pro/Engineer Shapes created using Advanced Surfacing techniques, Sweeps and Curves, and Spinal Bend
16. Just For Fun All components modeled in SolidWorks Renderings created in PhotoView 360 Models created with advanced surfacing and feature techniques