SlideShare a Scribd company logo
1 of 10
PROBLEM:- DESIGN A WIRED/WIRELESS ROBOT WHICH CAN TRAVERSE A MAXIMUM DISTANCE IN MINIMUM TIME.
GENERAL RULES:- 1. Only one team will race at a time.2. THE TEAM WILL CONSIST OF MAX 4 MEMBERS.3. the robot must not cause damage to the                                 TRACK,IF DONE IT WILL CAUSE DISQUALIFICA-   -ION OF THE TEAM.4. 2/3 chances will be given to each team.   Best of their time will be taken into   consideration.
Track Specifications: 1.THE TRACK WILL BE MORE THAN 40CM WIDE.2.There might be abrupt angles, but THESE  WILL NOT EXCEED 30 DEGREES.3.There will be certain obstacles in the  race track which will try to slow                  down the bot.4.The design and size of the obstacles     may vary from that shown in the   pictures.
          ARENA
Robot Specifications: 1.Robots can be Human-operated OR WIRELESS,   onboard power supply is allowed.2.For wireless control, the team must use  a dual frequency controller.3.The maximum robot dimension is400mm(L) x 400mm(B) x 400mm(H).4.NO CONSTRAINTS ON ROBOT’S WEIGHT.5.The wire must remain slack all the time.   Failing to do so will cause penalty.
TECHNICAL SPECIFICATION 1.Robot should not be made of any artificial lego kit.2.robot involving programming module can be programmed in any programming language and programming software ex.avr code vision,keil,matlab.3.microprocessor used should  strictly follow ieee standars.
Power Supply and Voltage Regulation: The electric voltage between 2 points anywhere in the machine should not be more than 12 V DC at any point of time. If a team is using AC voltage in any of its parts then the voltage should not exceed 12 V AC at any point of time as well.
JUDGING CRITERIA :- 1.The points will be rewarded according  to the time elapsed in reaching the  finish line.2.if none of them reached the cross    line,the team which cover max distance   will be declared as winner.3.compeition will go on until we get a  winner.4.Judges' decision shall be treated as  final and binding on all.
JUDGING CRITERIA :- 1.The points will be rewarded according  to the time elapsed in reaching the  finish line.2.if none of them reached the cross    line,the team which cover max distance   will be declared as winner.3.compeition will go on until we get a  winner.4.Judges' decision shall be treated as  final and binding on all.

More Related Content

Viewers also liked

Pdhpe within schools
Pdhpe within schoolsPdhpe within schools
Pdhpe within schools16718193
 
Asgnment terbaek entrepreneur
Asgnment terbaek entrepreneur Asgnment terbaek entrepreneur
Asgnment terbaek entrepreneur Yanadh Nadhirah
 
Seedbuzz recruitment helping you reach potential talent in agri industry
Seedbuzz recruitment   helping you reach potential talent in agri industrySeedbuzz recruitment   helping you reach potential talent in agri industry
Seedbuzz recruitment helping you reach potential talent in agri industrySeedbuzz.com
 
Reglas Básicas de Netiquette
Reglas Básicas de NetiquetteReglas Básicas de Netiquette
Reglas Básicas de Netiquetteavalenzano
 
Phoenix Contact's CF500, semi automatic crimping machine
Phoenix Contact's CF500, semi automatic crimping machinePhoenix Contact's CF500, semi automatic crimping machine
Phoenix Contact's CF500, semi automatic crimping machinePhoenix Contact
 
Why is pdhpe important in schools
Why is pdhpe important in schoolsWhy is pdhpe important in schools
Why is pdhpe important in schoolsSasha_1
 
TOOL fox hand tools from Phoenix Contact
TOOL fox hand tools from Phoenix ContactTOOL fox hand tools from Phoenix Contact
TOOL fox hand tools from Phoenix ContactPhoenix Contact
 
Original research presentation
Original research presentationOriginal research presentation
Original research presentationEndalkachew Abebe
 
Servicio amigables para adolescentes y jóvenes
Servicio  amigables para adolescentes y jóvenesServicio  amigables para adolescentes y jóvenes
Servicio amigables para adolescentes y jóvenesDiego Cortes
 
Adjustable Torque Screwdriver tools by Phoenix Contact
Adjustable Torque Screwdriver tools by Phoenix ContactAdjustable Torque Screwdriver tools by Phoenix Contact
Adjustable Torque Screwdriver tools by Phoenix ContactPhoenix Contact
 
Small Electronic Plier Hand Tools by Phoenix Contact
Small Electronic Plier Hand Tools by Phoenix ContactSmall Electronic Plier Hand Tools by Phoenix Contact
Small Electronic Plier Hand Tools by Phoenix ContactPhoenix Contact
 
Eletronica basica vol 01_lr de oliveira
Eletronica basica vol 01_lr de oliveiraEletronica basica vol 01_lr de oliveira
Eletronica basica vol 01_lr de oliveirafpv_transilvania
 

Viewers also liked (12)

Pdhpe within schools
Pdhpe within schoolsPdhpe within schools
Pdhpe within schools
 
Asgnment terbaek entrepreneur
Asgnment terbaek entrepreneur Asgnment terbaek entrepreneur
Asgnment terbaek entrepreneur
 
Seedbuzz recruitment helping you reach potential talent in agri industry
Seedbuzz recruitment   helping you reach potential talent in agri industrySeedbuzz recruitment   helping you reach potential talent in agri industry
Seedbuzz recruitment helping you reach potential talent in agri industry
 
Reglas Básicas de Netiquette
Reglas Básicas de NetiquetteReglas Básicas de Netiquette
Reglas Básicas de Netiquette
 
Phoenix Contact's CF500, semi automatic crimping machine
Phoenix Contact's CF500, semi automatic crimping machinePhoenix Contact's CF500, semi automatic crimping machine
Phoenix Contact's CF500, semi automatic crimping machine
 
Why is pdhpe important in schools
Why is pdhpe important in schoolsWhy is pdhpe important in schools
Why is pdhpe important in schools
 
TOOL fox hand tools from Phoenix Contact
TOOL fox hand tools from Phoenix ContactTOOL fox hand tools from Phoenix Contact
TOOL fox hand tools from Phoenix Contact
 
Original research presentation
Original research presentationOriginal research presentation
Original research presentation
 
Servicio amigables para adolescentes y jóvenes
Servicio  amigables para adolescentes y jóvenesServicio  amigables para adolescentes y jóvenes
Servicio amigables para adolescentes y jóvenes
 
Adjustable Torque Screwdriver tools by Phoenix Contact
Adjustable Torque Screwdriver tools by Phoenix ContactAdjustable Torque Screwdriver tools by Phoenix Contact
Adjustable Torque Screwdriver tools by Phoenix Contact
 
Small Electronic Plier Hand Tools by Phoenix Contact
Small Electronic Plier Hand Tools by Phoenix ContactSmall Electronic Plier Hand Tools by Phoenix Contact
Small Electronic Plier Hand Tools by Phoenix Contact
 
Eletronica basica vol 01_lr de oliveira
Eletronica basica vol 01_lr de oliveiraEletronica basica vol 01_lr de oliveira
Eletronica basica vol 01_lr de oliveira
 

Similar to R O B O R A C E

Problem statement - Sakshama
Problem statement  - SakshamaProblem statement  - Sakshama
Problem statement - SakshamaSubhojit Dey
 
T'12_robotics_Shadow
T'12_robotics_ShadowT'12_robotics_Shadow
T'12_robotics_ShadowTechniche
 
Mobilink Project On Site Swap SOP V2_4
Mobilink Project On Site Swap SOP V2_4Mobilink Project On Site Swap SOP V2_4
Mobilink Project On Site Swap SOP V2_4ij qkka
 
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...Fluke Networks
 
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...Fluke Networks
 
3 g rf_optimisation_basics
3 g rf_optimisation_basics3 g rf_optimisation_basics
3 g rf_optimisation_basicsMd.Akm Sahansha
 
IRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous MonitoringIRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous MonitoringIRJET Journal
 
IRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET-  	  Amphibian Spy Robot for Continuous MonitoringIRJET-  	  Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous MonitoringIRJET Journal
 
Multifunctional Robot (PPT).pptx
Multifunctional Robot (PPT).pptxMultifunctional Robot (PPT).pptx
Multifunctional Robot (PPT).pptxRuthviq
 
Home automation and Digital notice board using android app
Home automation and Digital notice board using android appHome automation and Digital notice board using android app
Home automation and Digital notice board using android appRishikesh .
 
project_NathanWendt
project_NathanWendtproject_NathanWendt
project_NathanWendtNathan Wendt
 
WIRELESS ROBOT PPT
WIRELESS ROBOT PPTWIRELESS ROBOT PPT
WIRELESS ROBOT PPTAIRTEL
 
Iaetsd autonomous pick and place rover for long distance
Iaetsd autonomous  pick and place rover for long distanceIaetsd autonomous  pick and place rover for long distance
Iaetsd autonomous pick and place rover for long distanceIaetsd Iaetsd
 

Similar to R O B O R A C E (20)

Problem statement - Sakshama
Problem statement  - SakshamaProblem statement  - Sakshama
Problem statement - Sakshama
 
T'12_robotics_Shadow
T'12_robotics_ShadowT'12_robotics_Shadow
T'12_robotics_Shadow
 
Mobilink Project On Site Swap SOP V2_4
Mobilink Project On Site Swap SOP V2_4Mobilink Project On Site Swap SOP V2_4
Mobilink Project On Site Swap SOP V2_4
 
Robowar
RobowarRobowar
Robowar
 
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-EFM2 Fiber Modules to Test Installed Corning Multimode Pre...
 
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...
How to Use the DTX-MFM2 Fiber Modules to Test Installed Corning Multimode Pre...
 
Segregare
SegregareSegregare
Segregare
 
3 g rf_optimisation_basics
3 g rf_optimisation_basics3 g rf_optimisation_basics
3 g rf_optimisation_basics
 
IRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous MonitoringIRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous Monitoring
 
IRJET- Amphibian Spy Robot for Continuous Monitoring
IRJET-  	  Amphibian Spy Robot for Continuous MonitoringIRJET-  	  Amphibian Spy Robot for Continuous Monitoring
IRJET- Amphibian Spy Robot for Continuous Monitoring
 
Tk116 user mannual min gsp vehicle tracker
Tk116 user mannual min gsp vehicle trackerTk116 user mannual min gsp vehicle tracker
Tk116 user mannual min gsp vehicle tracker
 
Multifunctional Robot (PPT).pptx
Multifunctional Robot (PPT).pptxMultifunctional Robot (PPT).pptx
Multifunctional Robot (PPT).pptx
 
Home automation and Digital notice board using android app
Home automation and Digital notice board using android appHome automation and Digital notice board using android app
Home automation and Digital notice board using android app
 
project_NathanWendt
project_NathanWendtproject_NathanWendt
project_NathanWendt
 
WIRELESS ROBOT PPT
WIRELESS ROBOT PPTWIRELESS ROBOT PPT
WIRELESS ROBOT PPT
 
Robonex
RobonexRobonex
Robonex
 
Iaetsd autonomous pick and place rover for long distance
Iaetsd autonomous  pick and place rover for long distanceIaetsd autonomous  pick and place rover for long distance
Iaetsd autonomous pick and place rover for long distance
 
LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink
 
Project
ProjectProject
Project
 
Robonex2
Robonex2Robonex2
Robonex2
 

R O B O R A C E

  • 1.
  • 2. PROBLEM:- DESIGN A WIRED/WIRELESS ROBOT WHICH CAN TRAVERSE A MAXIMUM DISTANCE IN MINIMUM TIME.
  • 3. GENERAL RULES:- 1. Only one team will race at a time.2. THE TEAM WILL CONSIST OF MAX 4 MEMBERS.3. the robot must not cause damage to the TRACK,IF DONE IT WILL CAUSE DISQUALIFICA- -ION OF THE TEAM.4. 2/3 chances will be given to each team. Best of their time will be taken into consideration.
  • 4. Track Specifications: 1.THE TRACK WILL BE MORE THAN 40CM WIDE.2.There might be abrupt angles, but THESE WILL NOT EXCEED 30 DEGREES.3.There will be certain obstacles in the race track which will try to slow down the bot.4.The design and size of the obstacles may vary from that shown in the pictures.
  • 5. ARENA
  • 6. Robot Specifications: 1.Robots can be Human-operated OR WIRELESS, onboard power supply is allowed.2.For wireless control, the team must use a dual frequency controller.3.The maximum robot dimension is400mm(L) x 400mm(B) x 400mm(H).4.NO CONSTRAINTS ON ROBOT’S WEIGHT.5.The wire must remain slack all the time. Failing to do so will cause penalty.
  • 7. TECHNICAL SPECIFICATION 1.Robot should not be made of any artificial lego kit.2.robot involving programming module can be programmed in any programming language and programming software ex.avr code vision,keil,matlab.3.microprocessor used should strictly follow ieee standars.
  • 8. Power Supply and Voltage Regulation: The electric voltage between 2 points anywhere in the machine should not be more than 12 V DC at any point of time. If a team is using AC voltage in any of its parts then the voltage should not exceed 12 V AC at any point of time as well.
  • 9. JUDGING CRITERIA :- 1.The points will be rewarded according to the time elapsed in reaching the finish line.2.if none of them reached the cross line,the team which cover max distance will be declared as winner.3.compeition will go on until we get a winner.4.Judges' decision shall be treated as final and binding on all.
  • 10. JUDGING CRITERIA :- 1.The points will be rewarded according to the time elapsed in reaching the finish line.2.if none of them reached the cross line,the team which cover max distance will be declared as winner.3.compeition will go on until we get a winner.4.Judges' decision shall be treated as final and binding on all.