Indo Aerospace SolutionsPrivate Limited (IAS),                                                                            ...
ALUMINUM SHEET & PLATE                                                 Aluminum Sheet (Non Heat Treatable)      Aluminum P...
ALUMINUM SHEET & PLATE                                                 Aluminum Sheet (Non Heat Treatable)      Aluminum P...
ALUMINUM SHEET & PLATE                                                 Aluminum Sheet and Heat Treatable                  ...
ALUMINUM SHEET & PLATE                                                 Alloys for AEROSPACE Industry and            Also A...
STAINLESS SHEET & PLATE                                             Aluminum Sheet & Plate Guide to                       ...
Steel rounds and flatsHIgh Temp        N Series      VAR (Low Alloy)    Conditions     Melt TypesA286          N32 (XM-28)...
carbon steel SHEETCold Roll Commercial Quality                                             Expanded MetalMaximum carbon co...
carbon steel plateA-36 Carbon Steel Plate                       4140 PreHard Alloy Steel Plate                            ...
copper, Brass, bronze & beryllium                                                                                         ...
ALUMINUM rod & bar              Aluminum Rounds                              Aluminum Rounds                           Alu...
ALUMINUM rod & bar                                        European & British Specifications    Aluminum Squares (Cold Finis...
STAINLESS rod & bar                                             Stainless Bar Guide to FERRITIC                           ...
STAINLESS rod & bar            Stainless Round                                  Stainless Squares                         ...
TITANIUM                                                                  Titanium6AL-4V            AMS 4928, AMS 4911, MI...
carbon steel rod & bar                Carbon Steel Rounds                  Carbon Steel Hexagons1018 (Cold       ASTM A 10...
ALLOY STEEL & MARAGING steel                   Alloy Steel                                     Maragring Steel4340 MOD “30...
NICKEL BASE ALLOY and INVAR                                                          INVAR        Nickel Base Alloy       ...
tube and pipe                                                          copper alloysALUMINUM ALLOYS                       ...
aircraft consumables & hardwaresEMTEQ                                                            Aerospace Hardware Standa...
Upcoming SlideShare
Loading in...5
×

Indo Aerospace Solutions - Product catalog

963
-1

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
963
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Indo Aerospace Solutions - Product catalog

  1. 1. Indo Aerospace SolutionsPrivate Limited (IAS), indo e-mail: enquiry@indo-aerospace.com indo aerospace solutions (P) ltd.Headquartered in New Delhi, India, isa leading provider of innovativeDistribution and Supply Chain aerospaceManagement services.We are an International spare parts solutionssupplier and distributor ofConsumables, Expendables, Chemicals privateand Metals for Aerospace and otherIndustries. Indo Aerospace has a limitedwarehouse in the Special EconomicZone located in Noida which is 20minutes drive from the NationalCapital Delhi.In addition to the regular supply ofparts, we have worldwide links withnumerous major manufacturers withimmediate stock at competitive prices. Uttar Pradesh-201305 Dadri Road, Noida, Phase - II Noida Special Economic Zone, SDF L-2This enables us to draw from theirstocks and reduces the waiting time forthe parts our customer needs.We are an ISO 9001: 2008Certified Company www.indo-aerospace.com Email: enquiry@indo-aerospace.com Phone: +91-11-24322007, +91-11-24317007 Fax: +91-11-24321504
  2. 2. ALUMINUM SHEET & PLATE Aluminum Sheet (Non Heat Treatable) Aluminum Plate (Non Heat Treatable)Aluminum Sheet & PlateThe non-heat treatable alloys attain 1100-0 AMS QQA 250/1 ASTM B 209 1100-H112 AMS QQA 250/1 ASTM B 209maximum strength beyond the annealedcondition through cold work hardening. In 1100-H14 AMS QQA 250/1 ASTM B 209 3003-H14 AMS QQA 250/1 ASTM B 209the H tempers of sheet and plate, this isinitially the result of cold rolling to finalthickness, or may be the result of 3003-O Non Heat Treatable 5052-O AMS QQA 250/8 ASTM B 209subsequent cold forming. They possesshigh corrosion resistance, goodformability, pleasing appearance and 3003-H14 AMS QQA 250/2 ASTM B 209 5052-H32 AMS QQA 250/8 ASTM B 209good weldability. They are widely used formanufactured products and general sheet 5052-H34 AMS QQA 250/8 ASTM B 209and plate applications. 5052-H32 AMS QQA 250/8 ASTM B 209 5052-H321 Non Heat Treatable 5052-H112 AMS QQA 250/8 ASTM B 209 5052-H324 Non Heat Treatable 5083-H112 AMS QQA 250/6 ASTM B 209 5052-H34 AMS QQA 250/8 ASTM B 209 5086-H112 AMS QQA 250/7 ASTM B 209 5083-H116 AMS QQA 250/6 ASTM B 209 5086-H116 AMS QQA 250/7 ASTM B 209 5086-H116 AMS QQA 250/7 ASTM B 209 3003-H22/24 Bright Finish 5005-H14 AMS QQA 250/6 ASTM B 209 1100-O, Aluminum Circles 3002-O
  3. 3. ALUMINUM SHEET & PLATE Aluminum Sheet (Non Heat Treatable) Aluminum Plate (Non Heat Treatable)Aluminum Sheet & PlateThe non-heat treatable alloys attain 1100-0 AMS QQA 250/1 ASTM B 209 1100-H112 AMS QQA 250/1 ASTM B 209maximum strength beyond the annealedcondition through cold work hardening. In 1100-H14 AMS QQA 250/1 ASTM B 209 3003-H14 AMS QQA 250/1 ASTM B 209the H tempers of sheet and plate, this isinitially the result of cold rolling to finalthickness, or may be the result of 3003-O Non Heat Treatable 5052-O AMS QQA 250/8 ASTM B 209subsequent cold forming. They possesshigh corrosion resistance, goodformability, pleasing appearance and 3003-H14 AMS QQA 250/2 ASTM B 209 5052-H32 AMS QQA 250/8 ASTM B 209good weldability. They are widely used formanufactured products and general sheet 5052-H34 AMS QQA 250/8 ASTM B 209and plate applications. 5052-H32 AMS QQA 250/8 ASTM B 209 5052-H321 Non Heat Treatable 5052-H112 AMS QQA 250/8 ASTM B 209 5052-H324 Non Heat Treatable 5083-H112 AMS QQA 250/6 ASTM B 209 5052-H34 AMS QQA 250/8 ASTM B 209 5086-H112 AMS QQA 250/7 ASTM B 209 5083-H116 AMS QQA 250/6 ASTM B 209 5086-H116 AMS QQA 250/7 ASTM B 209 5086-H116 AMS QQA 250/7 ASTM B 209 3003-H22/24 Bright Finish 5005-H14 AMS QQA 250/6 ASTM B 209 1100-O, Aluminum Circles 3002-O
  4. 4. ALUMINUM SHEET & PLATE Aluminum Sheet and Heat Treatable Aluminum Sheet (Heat Treatable) Conditions 2024-O Bare AMS QQA 250/4 AMS 4035 ASTM B 209Aluminum Sheet & Plate Guide toHeat Treatable Alloys 6061 O, T4, T6 2024-O ALCAD AMS QQA 250/5 AMS 4040 ASTM B 209The heat treatable alloys attain maximum 7050 T4, T6 2024-T3 Bare AMS QQA 250/4 AMS 4037 ASTM B 209strength through controlled heattreatment either before or after forming 2024-T3 Alclad AMS QQA 250/5 AMS 4041 ASTM B 209operations. They are the highest strength 7075 T73, T6, Oalloys and are hard, with good 2024-T81 AMS QQA 250/4 ASTM B 209appearance, and generally good resistanceto corrosion and abrasion. They are 2024-T81 Alclad AMS QQA 250/5 ASTM B 209particularly suited for structural Aluminum Sheet & Plate Guide to Castapplications and other uses requiring both 6061-O AMS QQA 250/11 AMS 4025 ASTM B Tooling Plate 209formability and strength. MIC-6 cast aluminum plate holds close 6061-T4 AMS QQA 250/11 AMS 4026 ASTM BALLOY 2024 is known widely as an tolerances in all dimensions and is thermally 209“aircraft” alloy. This grade can offer stabilized. MIC-6 is excellent for design 6061-T6 AMS QQA 250/11 AMS 4027 ASTM Bstrength similar to or exceeding those of components requiring metal removal without 209mild steel in the heat treated condition. distortion. This molten metal is continuouslyThis alloy does not have good corrosion fed, eliminating defects. 7075-O Bare AMS QQA 250/12 AMS 4044 ASTM Bresistance 209TYPICAL END USES: Aircraft skins, cowls Aluminum Sheet & Plate Guide to 7075-O Alclad AMS QQA 250/13 AMS 4048 ASTM Band structurals, aircraft structural Aluminum Mold Plate 209application, side panels, molds for plasticsindustry. M-1 was developed especially for the Molding 7075-T6 Bare AMS QQA 250/12 AMS 4045 ASTM B 209 Industry. It is used for mold applications where 1 to 12 cavities are required. This cost- 7075-T6 Alclad AMS QQA 250/13 AMS 4049 ASTM B effective aluminum plate lowers production 209 costs by eliminating the need for reworking material as in tool steel or wrought aluminum 7475-T761 Alclad AMS 4100 alloys.
  5. 5. ALUMINUM SHEET & PLATE Alloys for AEROSPACE Industry and Also Available. Aluminum Plate (Heat Treatable) Tempers M-1 Aluminum Mold Plate2024-T351 AMS QQA 250/4 AMS 4037 ASTM B 209 MIC-6 Cast Aluminum Tooling Plate2014-T651 AMS 4029 2014, 2024, T351, T851, T7651, T651, K100-S Cast Aluminum Tooling Plate 2124, 7050, T7351, T652, T74512024-T851 AMS QQA 250/4 7075, 7475, European & British Specifications 6013, 2014, (Plate)6061-T651 AMS QQA 250/11 AMS 4027 2124, 2219, 7175 We also stock Plate for 2014, 5083, 6061, ASTM B 209 6082 & 7075 along with Cast Tooling Plate (5000 / 7000 Series) in EUROPEAN6061-T6 AMS QQA 250/11 and BRITISH Specifications.6061-T652 AMS QQA 250/11 SHEETS - Alclad / Bare European & British Specifications (Sheet)7050-T7451 AMS 4050, BMS 7-323, BAMS 2024, 7075 O-Temper, T6, T3, T81, T73 516-03, BSS 7055, DMS 2233, We also stock Plate for 1050, 1200, 3103, MMS1420 2014, 5083, 5251, 5754 & 6082 in EUROPEAN and BRITISH Specifications.7050-T7651 AMS 4201, DMS 2233, BSS 7055,7075-T651 AMS QQA 250/12 AMS 4045 ASTM B 209 SPACE Industry - Certified To Write to us at7075-T7351 AMS QQA 250/12 AMS 4078 enquiry@indo-aerospace.com to AMS, DMS, ASTM, BMS, FMS, Additional ASTM B 209 know about Coil, Strip and BSS, BAMS, MMS, MIL STD, Specifications AMS-QQA available on Extrusions.7475-T7351 AMS 4202, request
  6. 6. STAINLESS SHEET & PLATE Aluminum Sheet & Plate Guide to Stainless Sheet Precipitation Grade - MagneticAluminum Sheet & Plate Guide to 301 ASTM A 177 and Heat TreatableAustenitic Grade - Non Magneticand Non Heat Treatable Precipitation Hardening grades are 304 ASTM A 167, ASTM A 240, AMS5513 martensitic stainless steel and can beAustenitic stainless steels contain precipitation hardened by a low 304 #4 ASTM A 167, ASTM A 240, AMS5513chromium and nickel as the principal temperature heat treatment, thereby Finishalloying elements. They can be hardened minimizing scaling and distortion, whileonly by cold working. In the annealed allowing parts to be machined to close 304 #8 ASTM A 167, ASTM A 240, AMS5513condition, they are not attracted to a tolerances prior to heat treatment. Finishmagnet but may become slightly magnetic 316L ASTM A 167, ASTM A 240, AMS5524 316L #4 ASTM A 167, ASTM A 240, AMS5524Aluminum Sheet & Plate Guide to Aluminum Sheet & Plate Guide to 321 ASTM A 167, ASTM A 240, AMS5510Martensitic Grade - Magnetic and Ferritic Grade - Magnetic andHeat Treatable Non Heat Treatable Stainless PlateMartensitic Stainless Steels are straight- Ferritic Steels are straight-chromiumchromium types bearing AISI 400 series types also identified by AISI 400 series 303 ASTM A 480/895numbers. They can be hardened to numbers. They have low carbonto-tensile strengths exceeding 200,000 psi chromium ratio and are not hardenable 304L ASTM A 167, ASTM A 240, AMS5511by heat treatment. They resist corrosion by heat treatment. However, they arein mild environments and they are strongly magnetic and have good 304 ASTM A 167, ASTM A 240, AMS5513always strongly magnetic. resistance to corrosion and oxidation. 304 ASTM A 793 (Diamond Floor Plate) Also Available in Coil, sheet & Strip: 316L ASTM A 167, ASTM A 240, AMS5507 A286, 302, 316, 15-5PH, 17-4 PH, 17-7 410 ASTM A 240, AMS 5504 PH & 347 Plate:321, 15-5 PH & PH13-8MO 17-4 ASTM A 693, AMS 5604
  7. 7. Steel rounds and flatsHIgh Temp N Series VAR (Low Alloy) Conditions Melt TypesA286 N32 (XM-28) 4330 Annealed AOD N33 (XM-29) 4340 Heat Treated ESR N40 (21-6-9) 300M Cold Drawn VAR N50(XM-19) D6AC Rough Turned N60(UNS 21800) 9310 Smooth Turned 52100 Centerless Ground H11 Polished Nit135Mod HY-TUF 6150 4620 9430
  8. 8. carbon steel SHEETCold Roll Commercial Quality Expanded MetalMaximum carbon content .10. Soft Steel Sheet - Commercial Qualityenough to bend flat on itself in any Expanded Metal may be used for manydirection without cracking. Ductile enough industrial purposes such as open Cold Rolled ASTM A 366-CRCQfor moderate drawing applications. Light partitions, window guards, machineoil protects surface from rust. guards, and other manufacturing and Cold Rolled ASTM A 366-CRCQ maintenance uses. It is more rigid than an equal weight of solid plate or wire mesh. In Hot Rolled, ASTM A 569-HRPOHot Roll Commercial Quality fabricating it may be cut to any desired Pickled andMaximum carbon content .10. A low cost shape without loss of its original strength. Oiledsteel sheet, soft enough to bend on itselfin any direction without cracking. Shallow Galvanized ASTM A 527(Lockforming Quality)drawing and forming O.K., weldable.Surface has normal mill oxide. To be usedwhere surface finish is not crucial. Galvanized Galvanized ASTM A 526 Zinc coating applied by either hot dippedHot Roll Pickled and Oiled Expanded Carbon Steel (Both Falttened and or electrolytic deposition. With this Metal Not Flattened)Acid pickling removes mill oxide, coating, sheets can be formed withoutimproving surface appearance and flaking.finishing quality. Paint and enamel will Cold Rolled ASTM A 366-CRCQadhere after cleaning. Same propertiesand forming characteristics as commercialquality.
  9. 9. carbon steel plateA-36 Carbon Steel Plate 4140 PreHard Alloy Steel Plate Steel PlateExcellent forming and welding ability, also Mill heat treated to a 3 Brinell hardnesscan be hardened within carbon limitations. Mild Carbon Steel ASTM A 36 262/231, this usually eliminates the needTypical applications - machinery for heat treating by the customer. Thecomponents, plastic and rubber molds, As Rolled 4140 machining quality and toughness remainscams, bushings, fixtures, gears . excellent. Typical applications - same as 4140 as rolled but more difficult to Pre Hardened 4140 machine due the prehard material state.4140 Rolled AlloySteel Plate There are several additional material grades available upon request, such as:Heat treatable to a 250/300 Brinell 4340, Pressure Vessel, Abrasivehardness with good machinability and Resistance. Each of the grades has theretoughness. Typical applications - fixtures, own characteristics and application duemachine parts, adapters, molds, dies, to the wide range of elements.tools.
  10. 10. copper, Brass, bronze & beryllium Rod & BarCopper Sheet & Plate Yellow Brass Sheet & Plate Alloy 260 Cold Rolled 70/30 Composition CDA 172, CDA 175, CDA 464, CDA 642, CDAAlloy 110 - Cold Rolled ETP - per ASTM B 36 Alloy 6 (Cartridge Brass), 173, CDA 360, CDA 630Commercially pure per ASTM B 152 -Electrolytic Tough Pitch Copper (ETP) - with a nominal composition of 70% copper110 alloy is the most widely used of the and 30% zinc is the most widely usedcoppers because of its combination of copper alloy because of its combination ofelectrical and thermal conductivity, outstanding characteristics. The namecorrosion resistance, and workability as originated from its use as the standardwell as its aesthetic beauty. alloy for artillery shell and small-arms Coil, Sheet & STrip cartridge cases. Today, the alloy is widely used for clips, contacts, brackets in CDA 110, CDA 175, CDA 172, CDA 260 electrical wiring devices, especially for residential and commercial construction, and is often times fabricated with hot dip tin coatings. Copper Sheet and Plate Brass Sheet and Plate ALLOY 110 ASTM B 152 ALLOY 260 (Half Hard) 4140 (Cold Rolled)
  11. 11. ALUMINUM rod & bar Aluminum Rounds Aluminum Rounds Aluminum Hexagons 2011-T3 AMS QQ A225/3 ASTM B 211 6061-T6 AMS QQ A 225/8, ASTM B 211, 2011-T3 ASTM B 211, QQ A 225/3 AMS4117 (Cold Finish) 2011-T451 AMS QQ A225/3 ASTM B 211 6061-T651 AMS QQ A 225/8, ASTM B 211, 2024-T4 AMS QQ A 225/6, ASTM B 211, AMS4117 AMS 4120 (Cold Finish) 2024-T4 AMS QQ A225/3 ASTM B 211 6061-T6511 AMS QQ A 200/8 ASTM B 221 AMS 4120 2024-T351 AMS QQ A 225/6, ASTM B 211, AMS 4120 2024-T351 AMS QQ A225/3 ASTM B 211 6061-T6 AMS QQ A 200/8 ASTM B 221 (Cold Finish) AMS 4120 6061-T6 AMS QQ A 225/8, ASTM B 211, 2024-T851 AMS QQ A225/6 ASTM B 211 6262-T9 AMS QQ A 225/10 ASTM B 211 AMS 4117 (Cold Finish) 2024-T3511 ASTM B 221 7075-T6 AMS QQ A 225/9 ASTM B 211 6061- AMS QQ A 225/8, ASTM B 211, AMS 4123 AMS 4117 (Cold Finish) 2024-T3 ASTM B 221, ASTM B 594 7075-T651 AMS QQ A 225/9 ASTM B 211 AMS 4123 6061-T6511 AMS QQ A 200, ASTM B 211 5086-H111 AMS QQ A200/50 ASTM B 221 (Cold Finish) 7075-T6511 ASTM B 221 (Extruded) 7075-T6 AMS QQ A 225/9, ASTM B 211 6020-T8 Yellow 7075-T6 ASTM B 221 ASTM B 594 (Cold Finish) 6061-T6 HS QQ A 225/8, ASTM B 211, AMS 7075-T73 AMS QQ A 225/9 ASTM B 211 7075-T651 AMS QQ A 225/9, ASTM B 211 4117 7075-T7351 AMS QQ A 225/9, ASTM B 211, (Cold Finish)Also Available: 2618, 4032, 7050 & 7150 AMS4124
  12. 12. ALUMINUM rod & bar European & British Specifications Aluminum Squares (Cold Finish) Aluminum Rectangles (Cold Finish) We also stock 2014, 5083, 6061 & 70752011-T3 ASTM B 211, ASTM B 594 2024-T4 AMS QQ A 225/6, ASTM B 211, in EUROPEAN and BRITISH Specifications. AMS 41202024-T4 AMS QQ A 225/6, ASTM B 211, 2024-T351 AMS QQ A 225/6, ASTM B 211, AMS4120 AMS 41202024-T351 AMS QQ A 225/6, ASTM B 211, 7075-T6 AMS QQ A 225/9, ASTM B 211, AMS4120 AMS 41236061-T6511 AMS QQ A 200/8, ASTM B 211 7075-T651 AMS QQ A 225/9, ASTM B 211, AMS 41237075-T651 AMS QQ A 225/9, ASTM B 211, 7075-T7351 AMS QQ A 225/9, ASTM B 211, AMS 4123 AMS 41247075-T7351 AMS QQ A 225/9, ASTM B 211, AMS 41247075-T6511 AMS QQ A 200/11, ASTM B 211 Aluminum Rectangles (Extruded) 2024-T3511 AMS QQ A 200/3, ASTM B 211 Aluminum Squares - Extruded 6061-T6511 AMS QQ A 200/8 ASTM B 2116061-T651 AMS QQ A 200/8, ASTM B 221 6063-T52 ASTM B 221(Extruded) 7075-T6511 AMS QQ A 200/11, ASTM B 221
  13. 13. STAINLESS rod & bar Stainless Bar Guide to FERRITIC Stainless RoundStainless Bar Guide to Austenitic Ferritic Steels are straight-chromium 303 ASTM A 582 AMS 5640Grade - Non Magnetic and Non types identified by 400 series numbers. The low carbon-to-chromium ratio 304L ASTM A 276/479, AMS 5639 AMSHeat Treatable eliminates effects of thermal 5647 QQ S 763Austenitic stainless steels contain transformation. They can be hardenedchromium and nickel as the principal slightly by cold-working, however the 316L ASTM A 276/479, AMS 5648 AMSalloying elements. They can be hardened ferritic stainless steels are strongly 5653 QQ S 763only by cold working. In the annealed attracted to a magnet, have goodcondition, they are not attracted to a ductility, and have good resistance to 321 ASTM A 276/479, AMS 5645 QQ Smagnet but may become slightly magnetic corrosion and oxidation. 763after cold working. 347 ASTM A 276/479, AMS 5646 QQ S 763Stainless Bar Guide to Martensitic Stainless Bar Guide to 416 ASTM A 582 AMS 5610 QQ S 764Grade - Magnetic and Heat Precipitation Hardening -Treatable Magnetic and Heat Treatable 416 HT Heat Treated to RC 26-32, ASTM A 582, AMS 5610, QQ S 764Martensitic Stainless Steels are straight- PH Grades are martensitic magneticchromium types bearing AISI 400 series stainless steels, can be hardened by a 410 ASTM A 276/479, AMS 5612 AMSnumbers. They can be hardened to low temperature heat treatment, thereby 5613 QQ S 763tensile strengths exceeding 200,000 psi minimizing scaling and distortion andby heat treatment. They resist corrosion allowing parts to be machined to close 420/420F ASTM A 276, ASTM A484/582 AMSin mild environments and they are tolerances prior to heat treatment. 5620/5621 QQ S 763always strongly magnetic. Developed strengths up to 200,000 psi tensile in condition H 900. Corrosion 430 ASTM A 276/479, AMS 5627 QQ S resistance in most applications and 763 media. It is comparable to Type 304. 430F ASTM A 582 440C ASTM A 276 AMS 5630 QQ A 763 302, 304, 316, 410, 416, 418
  14. 14. STAINLESS rod & bar Stainless Round Stainless Squares Stainless Hexagons17-4 PH ASTM A 564, Grade 630, AMS 5643, 17-4 PH ASTM A 564, Grade 630, AMS 303 ASTM A 582, AMS 5640 AMS 5643, AMS5604, 5643 304 (Annealed ASTM A 276/479, AMS15-5 PH ASTM A 564, Grade XM12, AMS 303 ASTM A 582 AMS 5640 and Cold 5639/5647, QQ S 763(Vacuum 5659, BMS 7-240, AMS 5862 Drawn)Melt) 304 ASTM A 276/479, AMS 5639, QQ S 763 316L ASTM A 276/479, AMS13-8 PH AMS 5629, BMS 7-240, AMS 5862, (Annealed and 5648/5653, QQ S 763 ASTM-A564 416 (Annealed ASTM A 582 AMS 5610 QQ S 763 Cold Drawn) and Cold17-7 PH AMS 5528, MIL-S-25043 Drawn) 321 (Annealed ASTM A 276/479, AMS 5645, QQ S and Cold 763301 AMS 5517, AMS 5118, AMS 5519, Drawn) AMS 5901 Stainless Flats 347 (Annealed ASTM A 276/479, AMS 5646, QQ S303 SU AMS 5640 TYPE 1, MIL-S-7720, 303 (Annealed ASTM A 582, AMS 5640 and Cold 763 ASTM A582, AMS-S-7720 and Cold Drawn) Drawn)303 SE AMS 5640 TYPE 2, AMS 5641, MIL- 416 ASTM A 582, AMS 5610 S-7720, ASTM A582, AMS-S-7720 304 (Hot ASTM A 276/479, AMS 5639/5647 Rolled QQ S 763 17-4 PH ASTM A 564, Grade 630, AMS304 QQ-S-763, AMS 5639, AMS 5513, Annealed and 5643 ASTM-A240, AMS-QQ-S-763 Pickled)321 QQ-S-763, AMS 5639, AMS 5510, 316 (Hot ASTM A 276/479, AMS 5648/5653 ASTM-A240, AMS-QQ-S-763 Rolled QQ S 763 Annealed and Pickled) 17-4 PH (Hot ASTM A 564 Grade 630, AMS 5643 Rolled Annealed and Pickled)
  15. 15. TITANIUM Titanium6AL-4V AMS 4928, AMS 4911, MIL-T-9047, MIL-T-9046, MIL-F-83142, DMS 1592, DMS 1583, DMS 1570, ASTM-B-348, ASTM-F-1472, 770.102516AL-4V ELI AMS4930, MIL-T-9047, MIL-T-9046, ASTM-F-1366AL-6V-2SN AMS 4971, AMS 4979, MIL-T-9047, 59429, DMS 1870, GM3111, AMS 49786AL-2SN-4ZR-2MO AMS 4975, AMS 4976, MIL-T-9047, MIL-T-90466AL-2SN-4ZR-6MO AMS 4981, 770.10652, 770.103138AL-1MO-1V AMS 4972, AMS 497310V-2FE-3AL AMS 4984, AMS 4986, AMS 4987
  16. 16. carbon steel rod & bar Carbon Steel Rounds Carbon Steel Hexagons1018 (Cold ASTM A 108 1018 (Cold ASTM A 108Finish) Finish)11L17 (Cold ASTM A 108 1215 (Cold ASTM A 108Finish) Finish)12L14 (Cold ASTM A 108 12L14 (Cold ASTM A 108Finish) Finish)1215 (Drawn, ASTM A 108Ground &Polished) Carbon Steel Flats1045 (Turned, ASTM A 108 1018 (Cold ASTM A 108Ground & Finish)Polished) Carbon Steel Squares1018 (Cold ASTM A 108Finish) Write to us at: enquiry@indo-aerospace.com to know more about Carbon Steel Products.12L14 (Cold ASTM A 108Finish)
  17. 17. ALLOY STEEL & MARAGING steel Alloy Steel Maragring Steel4340 MOD “300M” BMS 7-26, AMS 6257, AMS 6417, C250 AMS 6512, MIL-S-46850 TYPE IV AMS 6419, CPS 4911, DMS 1935, GM 1012 C300 AMS 6514, MIL-S-46850 TYPE IV4340 VAC MELT AMS 6414, MIL-S-8844 CL1, BPS C350 MIL-S-46850 TYPE IV 299-947-0554340 AIR MELT BMS 7-28, AMS 6415, AMS 6484, AMS-S-50009310 VAC MELT AMS 6265, AMS 62679310 AIR MELT AMS 6260, MIL-S-73934340 MOD BMS 7-122, AMS 6427D6AC AMS 6431, FMS 1011,, AMS-S-89494130 AMS 6370, AMS 6350, AMS 6345, AMS 6348, AMS-S-6758, AMS- S-18729H-11 AMS 6487, AMS 6488, CPS 4907 Write to us at: enquiry@indo-aerospace.comHY TUF AMS 6418, AMS 6425, AMS-S-7108 to know more about Alloy Steel Products.NITRIDING VAC AMS 6470, AMS 6471, AMS-MELT S-6709, AMS 2300NITRIDING AIR AMS 6470, AMS 6472, MIL-S-6709MELT9-4-30 BMS 7-182 TYPE 2, AMS 6526
  18. 18. NICKEL BASE ALLOY and INVAR INVAR Nickel Base Alloy E-36 D-33000, ASTM-A-B753718 AMS 5662, AMS 5663, AMS 5664, AMS 5596, B50TF15 E-42 D-33000, ASTM-A-B753625 AMS5666, AMS 5599, ASTM-B-466 Write to us at: enquiry@indo-aerospace.com to know more about NICKLE BASED ALLOYS AND INVAR Products.
  19. 19. tube and pipe copper alloysALUMINUM ALLOYS STAINLESS ALLOYS2024 304 COPPER ALLOYSHigh strength alloy with excellent fatigue Is carried in both seamless and weldedresistance and machinability. Known conditions, it is non-magnetic, has good Please write to us to know more aboutwidely as an “aircraft” alloy for strength corrosion and heat resistance. Available Copper Alloys that we support. We stockbut not noted for corrosion resistance. in round, squares and rectangular forms. Copper Rounds, Squares, Rectangles, Tellurium Copper Rounds, Commercial6061 304L Bronze Rounds, Brass Rounds, BrassIs the most popular and versatile Is the extra low carbon (.03 max) variety Hexagons, Brass Squares, Brassaluminum alloy. This heat treatable of 304 intended for welding applications. Rectangles, Phosphor Bronze Rounds,grade is weldable and has good strength Aluminum Silicon Bronze Rounds, Solidand corrosion resistance. Extruded can Bearing Bronze etc 316 be supplied in either the structural orseamless condition. Usually light wall With the addition of molybdenum thesections are in the drawn condition. corrosion resistance of the grade is greatly increased.6063 316LIs the “architectural grade” with slightlyless strength than 6061, but is better Is the extra low carbon (.03 max) varietysuited for anodizing. Most popular in of 316, intended for welding application.square and rectangular sections. 321 and 3477075 Are grades that have increased Write to us at: enquiry@indo-aerospace.comOne of the highest strength grades used resistance to intergranular corrosionmainly in aircraft applications. with the additions of titanium and to know more about Tube, Pipe Products columbium. and Copper Alloys.
  20. 20. aircraft consumables & hardwaresEMTEQ Aerospace Hardware Standards CrouzetIn association with EMTEQ, IAS offers acomprehensive solution, specializing in avionics - Microswitches, Limit switches etc • ABS..- Airbus Standard - Position Sensorssystems and integration, cabin connectivity &productivity, interior lighting & cabin comfort, and • ASN../ASNE..-Aerospatiale - Sealed Rangeexterior lighting products. EMTEQ has built upon Standardyears of experience in the airline industry to become • DAN../DIN..-Deutsche Airbusa leading provider of professional engineering, Standarddesign, certification and consulting services. • NSA../Norme AerospatialeE m t e q s e x p e r i e n c e d FA A D E R s , D A R s ,mechanical engineers, structural engineers and • E0../ASNE../-Norme Electrique Amphenol Air LBavionics engineers have the expertise to offer • EN../- European Standards ECE - Quick Junction Modulescomprehensive certification solutions to meet your - Relays - Modular Connectorsprogram requirements. With over 50 years - Power Contactors - Circular Connectorscombined DER experience, and more than 100 - Blocks and Strips JunctionSTCs, trust EMTEQ as your FAA consulting andSTC requirement partner. Airtech Braids- EMTEQ Europe Granted FAA & TCCA Repair LISI Aerospace CheltonStation approvals. - Bonding Straps MG Silikon - Fasteners - Retaining Cords - Antenna Systems- EMTEQ Interior LED Lighting Selected to - Seals - Assembly Components - Bonding Leadsupgrade B767 Fleet. - Gaskets- EMTEQ selected for U.S DOD Research - CablesProgram Phase I Development of Lighting System - Grounding Straps RWG Frankenjura Korry Electronics VOSS Ateliers AHG - Anti Friction Bearing - Knobs - Clamps - Bolts and Screws - Spherical Plain Bearing - Switches - Couplings - Rivets - Journal Bearing - Indicators - Fasteners - Collars - Rod Ends - Fasteners www.indo-aerospace.com enquiry@indo-aerospace.com
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×