24. [NEW] シンプルモデル:DC電源モデル Copyright (C) Bee Technologies Inc. 2011 Operation Area Characteristics Rated output voltage Rated output line Rated operation range Maximum output current 9
25. [NEW] シンプルモデル:ヒューズモデル Copyright (C) Bee Technologies Inc. 2011 the minimum fusing current is 620mA, FF = 20m/400m = 1.55 Fig. Shows the complete setting of fuse model parameters by using data from the datasheet of CCF1N0.4 provided by KOA Speer Electronics, Inc. 10
26. [NEW] シンプルモデル:ヒューズモデル Copyright (C) Bee Technologies Inc. 2011 Simulation Result Simulation Circuit tF = 960.962usec. at IF = 5A tF = 6.0051msec. at IF = 2A *Analysis directives: .TRAN 0 1s 500u 100u .STEP PARAM dc_current LIST 1, 2, 5 tF = 24.013msec. at IF = 1A The simulation result shows the fusing times, tF, (the time that fuse blows) at the different fuse currents, IF . 11
27.
28. [NEW] シンプルモデル:リチウムイオン電池モデル Copyright (C) Bee Technologies Inc. 2011 Model Parameters: Cis the amp-hour battery capacity [Ah] e.g. C = 0.3, 1.4, or 2.8 [Ah] NS is the number of cells in series e.g. NS=1 for 1 cell battery, NS=2 for 2 cells battery (battery voltage is double from 1 cell) SOCis the initial state of charge in percent e.g. SOC=0 for a empty battery (0%), SOC=1 for a full charged battery (100%) TSCALEturns TSCALE seconds into a second e.g. TSCALE=60 turns 60s or 1min into a second, TSCALE=3600 turns 3600s or 1h into a second, (Default values) From the Li-Ion Battery specification, the model is characterized by setting parameters C, NS, SOC and TSCALE. 13
29. [NEW] シンプルモデル:リチウムイオン電池モデル Copyright (C) Bee Technologies Inc. 2011 Battery capacity is input as a model parameter The battery information refer to a battery part number LIR18500 of EEMB BATTERY. 14