White Fused Aluminum Oxide

White Aluminium Oxide Grit (SYNWAL)SYNCO White Fused Aluminium Oxide (SYNWAL) grit is over 99.5% pure grade ofaluminium based abrasive blasting media. The purity of this media along with thevariety of grit sizes available make it ideal for various blast cleaning applicationsparticularly where ferrous contamination is not desirable i.e. cleaning engineheads, valves, pistons and turbine blades in the aircraft, automotive industriesand non ferrous forgings, castings and components. SYNWAL is also superbchoice for roughening of hard surfaces prior to painting or coating for adhesionand bond strength.SYNWAL is an extremely sharp, long-lasting blasting abrasive which can berecycled many times having a break down rate of 5-7% per cycle. SYNWAL is asuitable choice as for blast finishing and surface preparation because in view of itssuperior longevity, hardness matrix and cost. Having hardness of 9 on MOH scaleand specific gravity of 3.9 gm/cc SYNWAL grains penetrate and cut even thehardest metals and sintered carbide effectively.Approximately 50% lighter than metallic media, SYNWAL has twice as manyparticles per kilogram. The fast-cutting action minimizes damage to thin materialsby eliminating surface stresses caused by heavier, slower-cutting media blastinggrits requiring more no of cycles to achieve the same result which sometimestends to deformity in the object.SYNWAL contains less than 0.2% free silica and is safer to use than sand. The gritsize is consistent and gives a smoother and uniform surface. For More Details Contact Us At SYNCO INDUSTRIES LIMITED 16-A (III), Heavy Industrial Area, Jodhpur - 342 005 Cell: +91 - 9214407021 Tel: +91 - 291 - 2741571/671 Fax: +91 - 291 - 2742557 Email: mail@synco.co.in Web: www.synco.co.in

White Fused Aluminum Oxide

by Synco Shot Blasting on Apr 18, 2011

Accessibility

Upload Details

Usage Rights

Statistics

White Fused Aluminum Oxide Document Transcript