Johan Svenmo, Albis

1. Johan Svenmo
20170309
PLASTRÅVAREDAGEN, ODENSE

2. INSPIRATION FRA BILINDUSTRIEN
2

3. 3
ALBIS PRODUCT RANGE

4. ALBIS PRODUCT RANGE
4

5. ALBIS DISTRIBUTION PROGRAM
5
AN OVERVIEW OF OUR PARTNERS

6. TECHNICAL COMPOUNDS
6

7. LIGHTING PRODUCTS
7
• LD - LIGHT DIFFUSION
• Homogenous, almost loss-free light diffusion,
excellent light transmission
• LB - LIGHT BLOCKING
• Low light transmission, High reflection of light
• LG - LIGHT GUIDING
• Efficient and homogeneous light guiding
• LC - LIGHT COLLECTING
• Light collecting with edge effect

8. LIGHT DIFFUSION
8
• LD materials provides sharp contours of
illuminated symbols from any viewing angle.
Individual color matched variants, light
diffusion, transmission grades and good
thermal stability against climate changes are
also no problem. Standard Light Diffusion

9. 9
GEAR SHIFT
• Automotive
• BMW AG
• Gear shift
• ALCOM® PC 740/4 UV WT1306-07LD
• Benefits:
• Homogenous illumination of the
functional lighting
• Sharp contours of illuminated symbols from any
viewing angle
• Excellent light transmission
LIGHT DIFFUSION

10. LIGHT BLOCKING
10
• enables separation of different light sources in
a confined space. At the same energy
performance level, effectiveness is increased
and brightness is improved, without shining into
neighboring chambers.

11. LIGHT GUIDING
11
• Material for light guides on polycarbonate
basis. It reaches the high transmission values
of conventional light conductor-technology and
provides directed luminous efficiency.

12. LIGHT COLLECTING
12
DISPLAY
• Automotive
• Speedometer
• ALCOM® PC 740/4.14 RD1171-12LC
• Benefits:
• Exeptional color
• Edge effect

13. ALBIS GROUP
• Transportation Automotive
• Head light Cover
 Makrolon AL2647 NC 550396
 Makrolon 2407 BK 901768
•Benefits
•Heat bond with two shot process
•Clarity of material
•Impact resistance
•Top coat for improved scratch resistancee
•Light transmission
MAKROLON PC
HEAD LIGHT COVER
13

14. ALCOM® WP - WEAR PROTECT
14
ALCOM WEAR PROTECT materials are compounds modified with PTFE, silicone, aramide, MoS2, graphite
and SL special lubricants based on various thermoplastics (such as PA, POM, PBT, PC or PPS).
Areas of application (examples):
• Bearings
• Bushings
• Sliding shoes
• Slide rails
• Gears

15. 15
• Automotive industry
• VW
• Bushing for brake pedal
• ALCOM POM 770/1 AR10 PTFE10
• Benefits
• Improved sliding
and friction properties
• Reduced wear
• Long service life
ALCOM® WP - WEAR PROTECT
BUSHING FOR BRAKE PEDAL

16. ALCOM® CFX COLOR EFFECTS
16
• Colored compounds for high quality design and
construction concepts
• Metallic effect – galvano, aluminium, etc.
• Flip-flop effect
• Pearl effect
• Fluorescent effect
• Afterglow effect
• Marble effect

17. ALCOM® CFX COLOR EFFECTS
17
AUTOMOTIVE
• BMW
• Engine cover 2L-Diesel
• ALCOM® PA6 900/8 GF10 MR20 SV12-778MCF
• Benefits
• Metallic surface
• Reduced tendency to warp
• High heat resistance

18. • – a perfect combination of properties
• Next generation of PP-based compounds
• High-temperature PP GF compounds
• NXT PP - engineering thermoplastics
• Glass fiber reinforced PP
• Innovative formulation
• Advanced processing technology @ ALBIS
• Benefits
• Closing the gap between standard PP and PA6
• Low density
• Superior mechanical properties
• Great chemical resistance
• Extraordinary thermal properties
• Easy flow, robust processing
• Direct overmolding with ALFATER XL TPV
Metal
PPA
PPS
PA
ALTECH
NXT PP
18
ALTECH NXT PP®

19. ALTECH NXT PP®
19
Automotive – Under the hood
• Heat aging resistance
• High heat deflection temperature
• Chemical resistance
Automotive – Interior
• Low emission
• High stiffness & low density
E&E – Power tools
• Low density – low weight
• High strength

20. -The flexible, cross-linked hard-soft solution.
20

21. p://www.plako.de/unternehmen.html
• Grip
• ALFATER XL A55I 4PA0000
• Advantages
• Low abrasion
• Good haptic
• Good bonding to polyamide
• Soft touch
• Adhesion to PA66 GF30

22. BAYBLEND - PC+ABS
Dashboard compartment + universal cradle
• Transportation-Automotive
• VW
• System supplier: BURY
• Dashboard compartment + universal cradle for
VW NEW BEETLE
• BAYBLEND T 85 XF 901450 BBS910
• Advantages
• Excellent flowability
• High impact strength
• Good temperature resistance
ALFATER XL A65I
4GP0000
Source: www.cnet.com

23. – THE SUSTAINABLE PLASTIC SOLUTION
23
ALTECH®ECO technical compounds are composed of up to 100% recycled polymers
• Sustainable technical plastics using secondary raw materials
• High quality proven in demanding technical applications (Auto, E&E…)
Broad range of polymers
• PA6, PA66, PP, PC, PC+ABS
• Tailor-made properties with different fillers and additives in prime quality!
• Different colors (depending on polymer type)
Near-to-prime quality
• Performance almost equal to virgin materials
• Careful selection of raw materials
• Close tolerances
• Fully-detailed datasheets
0%
20%
40%
60%
80%
100%
ALTECH PA6 ECO 2025/509
Technical data compared to prime grade

24. ALTECH PA6 ECO 4230/100
CASE STUDY - ENGINE COVER
24

25. ALBIS GROUP
– PPS the high-performance thermoplastic as metal substitute
25

26. CASE STUDY
TEDUR ®
26
Transportation
Spheros GmbH
Converter: KIPA-PLAST GMBH
Coolant pump
TEDUR L 9107-1 BK 9902
Benefits:
• High impact resistance
• Great dimensional stability (high inner pressure)
• Good creep resistance
• Good chemical resistance
Eric.Fautz@albis.com | tel +49 40 78105 – 444

27. TEDUR - PPS
Frame of a driving assistance camera
• Transportation-Automotive
• Audi A4
• System supplier: Leopold Kostal GmbH
• Frame of a driving assistance camera
• TEDUR L 9107-1 BK
• Advantages
• Thermal expansion coefficient like aluminum
• No absorption of water, high dimensional stability
because of the fine pitch thread for intake of the
camera lens
• No visible part but a consistent surface finish to avoid
disturbing reflections
• Suitable for gluing
• Good mechanical treatment, subsequent cutting of
the fine pitch thread
Source:Leopold Kostal GmbH & Co. KG

28. ALBIS GROUP
ULTRAMID ADVANCED N
28

29. ALBIS GROUP
ULTRAMID ADVANCED N
29

30. ALBIS GROUP
LURAN S 778T SPF30
30

31. ALBIS GROUP
31
WASHINGTON PENN PLASTIC

32. INSPIRATION FRA BILINDUSTRIEN
32

33. 33
ALBIS.
ALWAYS THERE FOR YOU,
WORLDWIDE.

34. 34
Mühlenhagen 35 | D-20539 Hamburg, Germany
Tel. +49 (0) 40 7 81 05-0 | Fax +49 (0) 40 7 81 05-361
info@albis.com | www.albis.com
ALBIS PLASTIC GmbH

35. DISCLAIMER
35
Note:
Any information given on the chemical and physical characteristics of our products, including technical
advice on applications whether verbally, in writing or by testing the product, is given to the best of our
knowledge. However, this information is given without obligation and does not exempt the buyer from
carrying out own investigations and tests in order to ascertain the product’s specific suitability for the
purpose intended. The buyer is solely responsible for the application, utilisation and processing of the
products, and must observe the laws and government regulations and the consequential rights of any
third party. At all times our Conditions of Sale apply. Our product lists include dangerous goods. The
correct marking of such goods is described in the respective data sheets.