If you've owned a regular radar detector, you know the hassles of setting it up and hiding it from thieves when not in use. You hate the dangling cords, suction cups and Velcro tabs that destroy the elegant contours of your instrument panel.
K40's exclusive "Divide-and-conquer" concept solves all that. Inside the cockpit, separate alert lights and speakers or custom Warning Pod mounts invisibly into your vehicle's instrument cluster. A unique two piece control switch, installed discreetly under the kick panel or in the dash, adjusts the on/off, city/highway, and volume functions.
More than Just Lines on a Map: Best Practices for U.S Bike Routes
1000 2000 Owners Guide
1. K40-1000 models have one red alert LED for radar
center position, the radar detector is off. In the
the “loudest” position. Counter-clockwise (left)
detection and one bi-color cityhighway LED.
Volume Control: The smaller inner knob is the
K40-2000P models add a second warning Pod
volume control adjustment. Clockwise (right) is
On-Off/City-Highway Switch: The large outer
K40-2000 models have two red alert LED’s for
OWNER’S GUIDE
knob on the control switch is the on-off/city-
position (left), the unit is in the “city” mode.
This switch controls the on-off/city-highway
front/rear radar detection and one bi-color
K40-1000P models use a single LED/piezo
function and volume of the radar detector.
“highway” mode. In the counter-clockwise
highway control. When the switch is in the
clockwise position (right), the unit is in the
K40-2000/2000P
K40-1000/1000P
warning Pod installed in your vehicle.
for separate rear detector indication.
CONTROL MODULE
is the “quieter” position.
UNDETECTABLE
(VISUAL DETECTION)
LED LIGHTS
city/highway LED.
OPERATING YOUR K40-1000/1000P UNDETECTABLE
ALERT LIGHT (RED)*
CITY MODE OFF HIGHWAY MODE
FILTER TURNED ON TURNS OFF ENTIRE UNIT FILTER TURNED OFF
CITY OFF HIGHWAY
VOLUME CONTROL
LEFT = LOW VOLUME
RIGHT = HIGH VOLUME
NOTE: THE VOLUME
CONTROL MODULE IS
CITY/HIGHWAY LIGHT *NOTE: WARNING POD USUALLY LOCATED IN
(GREEN) = HIGHWAY (FILTER OFF) USED IN PLACE OF INDI- OR UNDER THE DASH
(YELLOW) =CITY (FILTER ON) VIDUAL ALERT LED FOR
*USED WITH K40-1000/2000 UNITS ONLY. K40-1000P UNIT.
NOTE: CHECK WITH DEALER FOR PROPER LIGHT (LED) IDENTIFICATION
44507-1 7/07
OPERATING YOUR K40-2000/2000P UNDETECTABLE
FRONT ALERT
LIGHT (RED)*
INDICATES SIGNALS CITY MODE OFF HIGHWAY MODE
TO THE FRONT OF FILTER TURNED ON TURNS OFF ENTIRE UNIT FILTER TURNED OFF
VEHICLE
REAR ALERT
LIGHT (RED)
INDICATES SIGNALS TO
THE REAR OF VEHICLE
CITY OFF HIGHWAY
VOLUME CONTROL
LEFT = LOW VOLUME
RIGHT = HIGH VOLUME
CITY/HIGHWAY LIGHT *NOTE: WARNING PODS NOTE: THE VOLUME
(GREEN) = HIGHWAY (FILTER OFF) USED IN PLACE OF SEPA- CONTROL MODULE IS
(YELLOW ) = CITY (FILTER ON) RATE ALERT LED’S FOR USUALLY LOCATED IN
*USED WITH K40-1000/2000 UNITS ONLY. K40-2000P UNIT. OR UNDER THE DASH
NOTE: CHECK WITH DEALER FOR PROPER LIGHT (LED) IDENTIFICATION
2. TURN-ON SEQUENCE 7. The front and rear red alert lights will go out. LINEAR GEIGER CIRCUIT
(FOR K40-1000/1000P MODELS) This power-up test indicates the radar detector
is functioning and ready to receive radar. During a radar encounter audio and visual alerts
When starting your vehicle, the unit will go will intensify as you get closer to the police threat
through a full audio and visual test. and diminish as the threat passes.
CITY/HIGHWAY ADJUSTMENT
1. The red alert light will illuminate.
When the sensitivity switch is in the HIGHWAY
2. The radar audio tones will be heard: mode, your radar detector will provide full sensi-
1st tone: “Tweet” = X-band tivity and warnings to all FCC allocated radar MUTE CIRCUIT
2nd tone: “Chirp” = K-band bands and technology. Upon selecting this mode
3rd tone: “Buzz” = Ka-band Once radar is detected system audibly alerts for
the optional bi-color LED will glow GREEN.
several seconds and then automatically switches
3. The red alert light will flash and the When the sensitivity switch is in the CITY mode,
to a quiet clicking to reduce distraction during
pulse/instant-on “beep” will sound. your radar detector will virtually eliminate false
prolonged encounters.
alerts by removing all X-band radar signal warn-
4. The red alert light will flash and the continu- ings, the most common source of non-police
ous high pitched laser “beep” will sound (for radar signals. This mode also engages a filter
models that integrate the Defuser EX or EX2). system that is designed to reduce other weaker
ALERT OVERRIDE
5. The red alert light will go out. non-police signals while remaining on total top
alert for police radar. Upon selecting this mode DETECTION CIRCUIT
This power-up test indicates the radar detector is the optional bi-color LED will glow YELLOW. To ensure total protection against police speed
functioning and ready to receive radar. measuring guns, your K40 radar detector is
RADAR ALERT TONES designed to prioritize incoming signals and alert
TURN-ON SEQUENCE you to the most urgent threat based on the type
(FOR K40-2000/2000P MODELS) X-band = “Tweet” of signal detected. Laser signals have the high-
When starting your vehicle, the unit will go
K-band = “Chirp”
est priority, followed by Ka, K, and X band radar.
through a full audio and visual test.
Ka band = “Buzz”
*Rear Radar = “Brap”
*(K40-2000/2000P models only)
1. Both the front and rear red alert lights will
illuminate. RADAR ALERT SEQUENCE FOR
LASER ALERT TONE
2. The front radar audio tones will be heard: FRONT & REAR MODELS
1st tone: “Tweet” = X-band When encountering a police laser signal models (FOR K40-2000/2000P MODELS)
2nd tone: “Chirp” = K-band equipped with the optional Laser Defuser EX or
3rd tone: “Buzz” = Ka-band EX2 will respond with a continuous high pitched As you approach a police radar signal your radar
“beep,” accompanied by rapid flashing of the detector will activate the front alert LED light and
3. The front red alert light will flash and the
alert LED light (both front and rear alert LEDs sound the appropriate radar warning tone for X,
pulse/instant-on “beep” will sound.
flash on K40-2000/2000P models). K, or Ka band. As you enter the immediate prox-
4. The rear audio will sound with a “Brap” tone. imity of the radar source, both alert LED’s will
INSTANT-ON RADAR WARNINGS activate. After you pass the source the front LED
5. The rear red alert light will flash and the
pulse/instant-on “beep” will sound. and alert tone will go silent, while your rear LED
When your radar detector detects an instant-on light continues to flash and the alert tone switches
6. Both front and rear red alert lights will flash or pulse radar signal, it sounds an urgent, high
to a “Brap” tone for the duration of the encounter.
and the continuous high pitched laser “beep” pitched “beep,” accompanied by rapid flashing
will sound (for models that integrate the of the appropriate alert LED light (front or rear).
Defuser EX or EX2). After a series of “beeps” the alert tone will
switch to the appropriate X, K, or Ka band tone.