The document describes LED pilot lights that provide excellent illumination with long life and low current consumption. They are shock proof, vibration resistant, and can withstand wide voltage variations. The modular lights are available in red, green, amber, blue, and white and have a standard length of 15cm. They operate from 12V, 24V, 48V, 110V, or 220V AC/DC and have a current draw of 4-8mA depending on the voltage.

1. LED MODULE PILOT LIGHTS
LM8 - SERIES
Excellent illumination
Long life
Low current consumption
Shock proof and vibration resistant
Modular in construction
Capable of withstanding wide voltage variations
Available in Red, Green, Amber, Blue and White colour
ø9.5
Ordering code
Voltage
LM8( ) 12V AC/DC
LM8( ) 24V AC/DC
LM8( ) 48V AC/DC
LM8( ) 110V AC/DC
LM8( ) 220V AC/DC
26.3±0.5
Without lens
11.0
3.0
Characteristics
48V AC/DC
6
24V AC/DC
150.0
12V AC/DC
110V AC/DC
M8x0.5
220V AC/DC
Ø8
.0
Panel cut out
Voltage
12V AC/DC
24V AC/DC
48V AC/DC
110V AC/DC
6
LML8( ) 12V AC/DC
LML8( ) 24V AC/DC
LML8( ) 48V AC/DC
LML8( ) 110V AC/DC
LML8( ) 220V AC/DC
150.0
Ordering code
26.3±0.5
With lens
11.0
10
ø11.5
220V AC/DC
M8x0.5
.0
Ø8
( ) Colour : Red - R, Green - G, White - W, Amber - A, Blue - B
Panel cut out
TECHNICAL DATA
Current
Voltage
Voltage variation
Insulation resistance
Dielectric test voltage
Illumination method
Ambient temperature
Available colour
Termination
Cut-out required
Material
4mA to 8mA (voltage dependant)
12, 24, 48, 110, 220V AC/DC
±20% of rated voltage
> 500 Mohms
2.5 KV AC for 10 minute
Light emitting diodes controlled by electronic circuitry
-20°C to +75°C
Red, Amber, Green, Blue & White colour
7/36 insulated wire in red and black colour
For DC supply : Red wire is for +ve terminals
Black wire is for -ve terminals.
8.0 mm. dia / 10.0 mm. dia
Thermoplastic with metallic chrome plated bezel
Note : 1. Standard length is 15cms. For non standard length please mention the length of wire in cms, while ordering.
eg. : Cat. No. : LM8 R 12V AC/DC is offered with 15 cms. wire length.
2. Adaptor plate suitable for 10 mm. cut-out is also available, ordering Code is AD10
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice
www.essendeinki.com
10