design a luminaire in three days

1. Art and Science of Lighting
LED Experimentation
Ameeshi Goenka
PDP 302

2. Drawing

3. Process
1) Cut the pieces for the wooden frame. Stick and nail them to complete it. Paint it.
2) Make a rectangular box with handmade paper (don’t stick it yet). Cut out the letters
carefully that is to be lit. Paint it. Stick gateway sheet behind the letters to give a
diffused light effect.
3) Connect LED strip to an adapter and connect a power source to the adapter. Stick
the LED strip on the flap below the cut out part along its length then take it up to the
flap above the cut out part and continue along the length and bring it back down.
4) Make a cut to provide for the frame supports to pass through. Fold the rectangular
box and stick it.
5) Fix the luminaire onto the frame and your bar counter lighting fixture is ready.

4. Process Pictures

5. Final Pictures
In a dark space.

6. Final Pictures
In a lit up space.

7. Thank you