Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 422F2 BACKHOE LOADER LYF
Configuration: 422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain
Media Number -UENR3743-01 Publication Date -01/06/2015 Date Updated -05/06/2018
i07435290
Transmission (Direct Drive) - Assemble
SMCS - 3030-016-DD; 3066-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1590 Lifting Eye Assembly 1
B 422-5471 Lifting Eye Assembly 2
C 4C-3652 Spring Compressor 1
D 1P-1859 Retaining Ring Pliers 1
H 137-8102 Spring Compressor 1
J 1P-0510 Driver Gp 1
K - Loctite High Flex Gasket Maker -
L - Loctite Retaining Compound 648(1)
-
M - Loctite Retaining Compound 243(2)
-
N 8T-5096 Dial Indicator Gp 1
(1)
Loctite 649 is acceptable.
(2)
Loctite 242 is acceptable.
Note: The transmission will be assembled in major components. The major components will then
be assembled.
Note: Apply a light film of clean transmission oil to all components before assembly.
1/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Transmission case
Illustration 1 g03831934
1. Install breather (168).
Illustration 2 g03831928
Illustration 3 g03832503
2. Use Tooling (J) to install lip seal (162) into case (36). Dimension (X) is the depth to install
lip seal (162) into case (36). Dimension (X) is 4.00 ± 0.25 mm (0.157 ± 0.010 inch).
2/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Note: Install the shims behind each bearing cup that was recorded on the disassembly
procedure.
3. Install bearing cup (159), bearing cup (160), bearing cup (161), bearing cup (163), and
bearing cup (164) into case (36).
Illustration 4 g03831925
4. Install temperature sensor (158). Tighten temperature sensor (158) to a torque of
20 ± 3 N·m (177 ± 27 lb in).
Illustration 5 g03831923
5. Install O-ring seals (156) and (157) onto relief valve (150).
3/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g03831921
6. Install O-ring seals (153), (154), and (155) onto relief valve (148).
Illustration 7 g03831920
7. Install strainer (152) and bolts (151).
Illustration 8 g03831917
Illustration 9 g03833490
8. Install relief valve (148). Tighten relief valve (148) to a torque 46 to 54 N·m (34 to 40 lb ft).
4/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 9. Install relief valve (150). Tighten relief valve (150) to a torque 23 to 30 N·m
(204 to 266 lb in).
10. Use Tooling (J) to install lip seal (149) into the case. Dimension (Y) is the depth to install
lip seal (149) into the case. Dimension (Y) is 3.00 ± 0.25 mm (0.118 ± 0.010 inch).
11. Install pump (147), the O-ring seal, and bolts (146). Tighten bolts (146) to a torque of
18 to 31 N·m (159 to 274 lb in).
12. Apply Tooling (K) to the case and install plate (145) and bolts (144).
Illustration 10 g03830896
13. Apply Tooling (K) to the case and install torque converter housing (142) and bolts (143).
Illustration 11 g03830828
14. Install bearing cup (136), bearing cup (137), bearing cup (138), bearing cup (139), bearing
cup (140), and O-ring seals (141) into the case.
Direct Drive, Input Shaft
5/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 12 g03833578
1. Apply Tooling (L) to the input shaft and install gear (135). Raise temperature of bearing
cone (134) and install bearing cone (134) on the input shaft. Install sealing ring (133) onto
the input shaft.
Illustration 13 g03831169
2. Install O-ring seals (131) and (132) onto piston (130).
Illustration 14 g03833579
3. Install piston (130).
6/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g03830899
4. Install sleeve (129).
Illustration 16 g03830898
Illustration 17 g03830895
Personal injury can result from being struck by parts propelled by a
released spring force.
7/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
5. Install spring (128) and retainer (127). Use Tooling (H) and a suitable press to compress
spring (128). Use Tooling (D) to install retaining ring (126).
Illustration 18 g03830897
6. Install clutch pack (124) and thrust washer (125).
Illustration 19 g03830894
7. Install end plate (123) and retaining ring (122).
8/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g03830891
8. Install thrust bearing (120) and needle bearing (121).
Illustration 21 g03830890
9. Install gear (119) and thrust washer (118).
Illustration 22 g03830888
10. Use Tooling (D) to install retaining ring (117). Install retaining ring (117).
9/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 23 g03833580
11. Raise temperature of bearing cone (116) and install on the input shaft.
12. Install sealing rings (115).
Illustration 24 g03830884
13. Install input shaft (114).
Direct Drive, Reverse Shaft
Illustration 25 g03830836
10/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 29 g03830830
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Install spring (109) and retainer (108). Use Tooling (H) and a suitable press to compress
spring (109). Use Tooling (D) to install retaining ring (107).
Illustration 30 g03830829
5. Install clutch pack (106).
12/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 31 g03830827
6. Install end plate (105) and retaining ring (104).
Illustration 32 g03830825
7. Install thrust washer (103) and needle bearing (102) onto the reverse shaft.
Illustration 33 g03833582
8. Install gear (99) and bearing (101) onto the reverse shaft.
13/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 34 g03833583
9. Install thrust washer (100) onto the reverse shaft.
10. Raise temperature of bearing cone (98) and install bearing cone (98) onto the reverse shaft.
11. Install ring seals (97) onto the reverse shaft.
Illustration 35 g03830819
12. Install reverse shaft (96).
Direct Drive Shaft
14/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 36 g03833585
1. Raise temperature of bearing cone (95) and install bearing cone (95) onto the direct drive
shaft.
Illustration 37 g03833586
2. Raise temperature of bearing cone (94) and install bearing cone (94) onto the direct drive
shaft.
Illustration 38 g03830710
3. Install direct drive shaft (93).
Direct Drive, Rear Output Shaft
15/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 39 g03833705
1. Install bearing (92) and bearing spacer (91).
Illustration 40 g03833739
2. Install gear (88) and sleeve (87) onto the rear output shaft.
3. Raise temperature of sleeve (86). Install sleeve (86) and shims (83) onto the rear output
shaft.
Illustration 41 g03833740
4. Install bearing spacer (85) and bearing (84) onto the rear output shaft.
16/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 42 g03833742
5. Install synchronizer assembly (82) and shims (81) onto the rear output shaft.
Illustration 43 g03833743
6. Install gear (90) onto the rear output shaft.
7. Apply Tooling (L) to the splines of the rear output shaft and install gear (89).
8. Raise temperature of cone bearing (80) and install cone bearing (80) onto the rear output
shaft.
Illustration 44 g03829767
17/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
20. 9. Install needle bearings (79) and (78) onto the rear output shaft.
Illustration 45 g03829766
10. Install gear (77) onto the rear output shaft.
Illustration 46 g03829811
11. Install sleeve (76) onto the rear output shaft.
Illustration 47 g03829765
12. Install synchronizer assembly (75) onto the rear output shaft.
18/36
422F2 Side Shift Backhoe Loader LYF00001-UP (MACHINE) POWERED BY C4....
2019/12/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...