1. TURCON® VL SEAL
Single-Acting - O—Ring-Energized Turcon® Slipper Seal
Advantages
Compared with current rod seals, the following parameters
have been improved:
- VL Seal® design allows gland for a reduced radial depth
- Tighter leakage control
- Lower friction: (Reduced contact area between seal and
mating surface)
- Simplicity of design, using standard size O—Ring
- Featuring the Turcon® Stepseal® 2K back pumping effect
- The seal geometry prevents seal roll at low or shuffling
Pressure
Technical Data
Operating pressure: 5,000 psi (35 MPa)
Velocity: Up to 50 ft/s (15 m/s)
with reciprocating movements
Temperature range: -65°F to +390°F
(-54°C to +200°C)
depending on elastomer material
Clearance: As per Table XXIX
Media: Mineral oil-based hydraulic fluids,
flame retardant hydraulic fluids,
environmentally safe hydraulic fluids
(bio-oils), Phosphate Ester, water and
others, depending on the elastomer
Material
Ordering Example
TSS Series No: REL 3
Rod diameter: 2.000 inches (50.8 mm)
Material: Turcon T46
Rod
Diameter
dN f8/h9
Groove
Diameter