The weekly report discusses the progress of an engineering team working on a product design. The team members are named and their circuit design from last week is described, including using an LM35 temperature sensor and a CMOS IC operating at 12V. Their engineering analysis found the strong point was good group rapport, while the weakness identified was writing programs. The next week's job is listed as mechanic design.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 25, 2012
Name-Surname UtenSiriban
Student ID. 54261531
Group Name Eight
Engineering Team
Ten, Golf , Tom ,B ,Arm ,Gun
Members
Product Design
-
Team Members
Weekly Progress
Last week I had made about the circuit was found to be made. LM 35 is used to control the
temperature.Circuit voltage 12V.Circuit using ic cmos.Ic cmos voltage is higher than the ttl.The
design copper uses program Proteus v7.Copper sheet is two pages.
Figure 2.
Figure 1.
Engineering Analysis
Strong Point
Group has a good rapport.I think that works out well.
Week Point
My weakness is Writing Programs.
Next Week Job
Mechanic design.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI