This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed removal and installation instructions for fuel system components like high pressure fuel pipes, low pressure fuel pipes, and injector bleed-off pipes. Safety precautions for working on the fuel system are emphasized.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
2. 18 - Fuel and Exhaust System
96 - Fuel Pipe
03 - High Pressure Pipe
18 - 79 9813/5350-2 18 - 79
03 - High Pressure Pipe
Remove and Install
Special Tools
Description Part No. Qty.
Socket 17MM Offset -
(HP Fuel pipes)
331/27987 1
Torque Wrench
(10-100Nm)
993/70111 1
Important. Before disconnecting or removing fuel
pipes proceed as follows.
1. Make sure that you have the correct new parts.
1.1. The high pressure fuel pipes MUST BE
REPLACED with new ones.
1.2. The new fuel pipes must remain sealed
inside their bags before use. If a bag is open
DO NOT USE the fuel pipe, get a new one.
2. Obey all fuel system health and safety
information. Refer to (PIL 18-00).
3. Make sure that the engine is safe to work on.
3.1. The engine must cool and pressure in the
fuel system must decay before you start
work.
3.2. If the engine has been running, wait at least
one hour before you start work.
4. Clean the engine. Refer to Engine, Clean (PIL
15-00-00).
5. Remove the protective cover as follows.
Figure 300.
C
B
A
A Screw
B Plastic segment
C Protective cover
5.1. Push out the plastic segments.
5.2. Remove the screws and lift off the cover.
5.3. Remove any dirt or debris that is exposed.
Refer to Engine, Clean (PIL 15-00-00).
6. Always use a spanner at the top of the fuel pipe
nut (this will prevent damage to the nut).
Figure 301.
Injector Fuel Pipes
Remove
The procedure describes how to remove one fuel
pipe.
Figure 302.
E
A
B
D
C
A Fuel pipe
B Nut 1
C Fuel injector
D Fuel rail
E Nut 2
1. Remove the fuel pipes one at a time as follows.
1.1. Loosen the nut 2 at the fuel rail. Do not
remove the nut at this step.
1.2. Use the 17mm deep socket special tool at
the top of nut. This will prevent damage to
the nut.
3. 18 - Fuel and Exhaust System
96 - Fuel Pipe
03 - High Pressure Pipe
18 - 80 9813/5350-2 18 - 80
Special Tool: Socket 17MM Offset - (HP
Fuel pipes) (Qty.: 1)
Special Tool: Torque Wrench (10-100Nm)
(Qty.: 1)
1.3. Push the fuel pipe against the injector cone
and at the same time remove the nut 1.
1.4. Push the fuel pipe against the fuel rail cone
and at the same time remove the nut 2.
1.5. Make sure that there is no dirt or debris on
the fuel pipe or the connectors.
1.6. Remove the fuel pipe.
1.7. Seal all the open ports, use the correct parts
from the service kit.
2. Repeat step 1 to remove the other fuel pipes.
3. Discard the old fuel pipes.
Install
Important: The high pressure fuel pipes must be
replaced with new ones. The new fuel pipes must
remain sealed inside their bags before use. If a bag
is open do not use the fuel pipe, get a new one. Do
not open the bag until you are ready to assemble the
fuel pipe.
1. Make sure that the bleed-off adaptors are
assembled on the injectors before you install the
high pressure pipes.
2. Assemble the fuel pipes one at a time. The
procedure describes how to assemble one fuel
pipe.
2.1. Put the correct end of the fuel pipe against
the correct injector cone.
2.2. Tighten the nut 1 with your hand.
2.3. Put the other end of the fuel pipe against the
correct fuel rail cone.
2.4. Tighten the nut 2 with your hand.
2.5. Nuts must be tightened in the correct
sequence. Tighten nut 1 and then nut 2.
2.6. Use the special tool at the top of nut 1 and
tighten it to the correct torque value.
Torque: 27N·m
Special Tool: Socket 17MM Offset - (HP
Fuel pipes) (Qty.: 1)
2.7. Put the spanner at the top of nut 2 and
tighten it to the correct torque value.
Torque: 27N·m
Injection Pump to Rail Fuel Pipe
Remove
Figure 303.
D
C
E
A
B
A Nut 1
B Fuel rail
C Injection pump
D Nut 2
E Fuel pipe
1. Remove the fuel pipe as follows.
1.1. Loosen the nut 2. Do not remove the nut at
this step.
1.2. Use the 17mm deep socket special tool at
the top of nut. This will prevent damage to
the nut.
Special Tool: Socket 17MM Offset - (HP
Fuel pipes) (Qty.: 1)
Special Tool: Torque Wrench (10-100Nm)
(Qty.: 1)
1.3. Push the fuel pipe against the injector cone
and at the same time remove the nut 1.
1.4. Push the fuel pipe against the rail cone and
at the same time remove the nut 2.
1.5. Make sure that there is no dirt or debris on
the fuel pipe or the connectors.
1.6. Remove the fuel pipe.
1.7. Seal all the open ports, use the correct parts
from the service kit.
2. Discard the old fuel pipe.
4. 18 - Fuel and Exhaust System
96 - Fuel Pipe
03 - High Pressure Pipe
18 - 81 9813/5350-2 18 - 81
Install
Important: The high pressure fuel pipes must be
replaced with new ones. The new fuel pipes must
remain sealed inside their bags before use. If a bag
is open do not use the fuel pipe, get a new one. Do
not open the bag until you are ready to assemble the
fuel pipe.
1. To assemble the fuel pipe.
1.1. Put the correct end of the fuel pipe against
the correct pump cone at the injection
pump.
1.2. Tighten the nut 2 with your hand.
1.3. Put the other end of the fuel pipe against the
correct fuel rail cone.
1.4. Tighten the nut 1 with your hand.
1.5. Nuts must be tightened in the correct
sequence. Tighten nut 2 and then nut 1.
1.6. Use the special tool at the top of nut 2 and
tighten it to the correct torque value.
Torque: 27N·m
Special Tool: Socket 17MM Offset - (HP
Fuel pipes) (Qty.: 1)
1.7. Put the spanner at the top of nut 1 and
tighten it to the correct torque value.
Torque: 27N·m
After Installation
1. Ensure that all pipes are correctly installed
and located in retaining clips as applicable. If
retaining clips are missing or damaged they must
be replaced or renewed
2. Start the engine and check for fuel leaks.
5. 18 - Fuel and Exhaust System
96 - Fuel Pipe
06 - Low Pressure Pipe
18 - 82 9813/5350-2 18 - 82
06 - Low Pressure Pipe
Remove and Install
Before Removal
Obey all fuel system health and safety information.
Refer to Fuel System, Health and Safety (PIL 18-00).
Low Pressure Fuel Pipes
Remove
The low pressure fuel pipes have a nylon fitting
attached to the pipe that replaces the nut and olive.
The fittings are part of the pipe and not a separate
item.
1. To release the fuel pipe, first press and hold the
release buttons (one each side of the coupler).
Push the coupler towards the connector spigot
and then withdraw.
2. Cap all open ports to prevent ingress of dirt and
debris.
Assemble
1. To install the fuel pipe, press and hold the release
buttons. Push the coupler over the connector
spigot and release the button. The connector will
be heard to click when it is fully home and locked
in place.
2. To check that the connection has been fully
made, attempt to pull the connector from the
connector spigot without releasing the lock
mechanism. (A gentle pull is all that is required,
if the connection is not correct the connector will
release very easily.)
Figure 304.
B
A
C
A
A Release Buttons
B Coupler
C Spigot
After Assembly
1. Make sure that all the fuel pipes are correctly
installed and located in the retaining clips as
applicable. If retaining clips are missing or
damaged, they must be replaced or renewed.
2. Start the engine and check for fuel leaks.
Injector Bleed-off Pipes
Before Removal
Obey all fuel system health and safety information.
Refer to (PIL 18-00).
1. Make sure that the engine is safe to work on. The
engine must cool and pressure in the fuel system
must decay before you start work. If the engine
has been running, wait at least one hour before
you start work.
2. Clean the engine. Refer to Engine, Clean (PIL
15-00).
3. Remove the protective cover as follows.
6. 18 - Fuel and Exhaust System
96 - Fuel Pipe
06 - Low Pressure Pipe
18 - 83 9813/5350-2 18 - 83
3.1. Push out the plastic segments.
3.2. Remove the screws and lift off the cover.
Figure 305.
C
B
A
A Screw
B Plastic segment
C Protective cover
3.3. Remove any dirt or debris that is exposed.
Refer to Engine, Clean (PIL 15-00).
4. To remove the bleed pipe clips, remove the high
pressure fuel pipes first. Refer to (PIL 18-96-03).
5. DO NOT try to repair fuel pipes or connectors.
Defective fuel pipe assemblies must be replaced.
Remove
The following details the removal and replacement
of one bleed-off connector. The procedure for the
remaining connectors is identical.
1. Gently spring the location tabs apart and pull out
the bleed pipe connector. DO NOT use excessive
force on the tabs.
2. Remove and discard the O-ring.
3. If it is necessary to remove the bleed off pipe
assembly, remove the nylon fitting at the high
pressure pump.
4. Cap all open ports to prevent ingress of dirt and
debris.
Install
1. Install a new O-ring.
2. Push in the bleed pipe connector until the
location tabs snap over the connector.
3. If applicable, replace the high pressure fuel pipes
with new ones. DO NOT use a high pressure fuel
pipe that was removed. Refer to (PIL 18-96-03)
Figure 306.
C
A
D
B
A Location tabs
B Bleed pipe connector
C Bleed pipe clip
D High pressure fuel pipe
After Assembly
1. Make sure that all pipes are correctly installed
and located in retaining clips as applicable. If the
retaining clips are missing or damaged they must
be replaced or renewed.
2. Start the engine and check for fuel leaks.
3. Install the protective cover. Refer to Figure 305.
7. 24 - Brake System
00 - Brake System
00 - General
24 - 3 9813/5350-2 24 - 3
00 - General
Introduction ...................................................... 24-3
Health and Safety ........................................... 24-4
Technical Data ................................................. 24-5
Component Identification ................................. 24-6
Fault-Finding .................................................... 24-7
Bleed ............................................................... 24-8
Introduction
(For: 10TFT, 9TFT)
Under no circumstances allow conventional brake
fluid to be added to the system, never purge the
system and refill with brake fluid. Otherwise damage
will occur to all the rubber sealing components within
the brake system. Use only mineral based hydraulic
oil.
The machine uses axles with oil immersed totally
enclosed multi plate brakes. The machines have
front and rear brakes, operating on independent
circuits that gives dual circuit safety.
The brake system uses a tandem master cylinder
and is filled with mineral oil through a remotely
mounted fluid reservoir located behind the access
panel on the front of the seat support.
Normally adjustment of the brakes is not necessary
as they adjust automatically by design. Bleeding of
the system may be necessary if the system pipework
is damaged causing system leakage.
The dumper has a park brake system which is
integral with the disc and caliper installed to the
gearbox output shaft and is operated by a park brake
located to the right of the operator seat.
8. 24 - Brake System
00 - Brake System
00 - General
24 - 4 9813/5350-2 24 - 4
Health and Safety
Brake Fluid
Use of incorrect brake fluid will cause serious
damage to the seals of the braking system. This will
result in brake failure.
Service Brake Bleeding
Before bleeding the service brake system, park on
level ground and set the park brake to on. Put blocks
on both sides of the wheels on one axle to prevent
the machine rolling. Stop the engine and disconnect
the battery so that the engine cannot be started. If
you do not take these precautions the machine could
run over you.
Park Brake Maintenance
Before working on the park brake, park on level
ground and put blocks on both sides of all wheels
to prevent the machine rolling. Stop the engine and
disconnect the battery so that the engine cannot be
started. If you do not take these precautions the
machine could run over you.
Working Under the Machine
Make the machine safe before getting beneath it.
Make sure that any attachments on the machine are
correctly attached. Engage the park brake, remove
the ignition key, disconnect the battery. If the machine
has wheels use blocks to prevent unintentional
movement.
Brake Dust
Brake pads generate dust, which if inhaled may
endanger health. Wash off the caliper assemblies
before commencing work. Clean hands thoroughly
after completing the work.
Brake Dust
Brake shoes generate dust, which if inhaled
may endanger health. Make sure that dust is
removed correctly, particularly before installing
new components. Clean hands thoroughly after
completing the work.
Springs
Always wear personal protective equipment when
dismantling assemblies containing components
under pressure from springs. This will protect against
eye injury from components accidentally flying out.
Notice: Using incorrect fluid could damage the
system. See Fluids, Capacities and Lubricants for
the correct fluid. The fluid can harm your skin. Wear
rubber gloves. Cover cuts or grazes.
WARNING! Before working on the brake system,
make sure that the machine is on solid level ground.
Put blocks on all wheels to prevent the machine
rolling.
WARNING! Do not use the machine with any part of
its brake system disconnected or inoperative. When
the test has been completed, make sure all brake
system components are installed and the system is
operating correctly.
WARNING! Before testing the park brake make sure
the area around the machine is clear of people.
WARNING! If the machine starts to move during the
park brake test, immediately apply the foot brake and
reduce the engine speed.
WARNING! If the machine starts to move during the
service brake test, immediately reduce the engine
speed and apply the park brake.
WARNING! Do not use a machine with a faulty park
brake.
WARNING! Non approved modifications to drive
ratios, machine weight or wheel and tyre sizes may
adversely affect the performance of the park brake.
WARNING! Oil on the brake disc will reduce brake
effectiveness. Keep oil away from the brake disc.
Remove any oil from the disc with a suitable solvent.
Read and understand the solvent manufacturer's
safety instructions. If the pads are oily, install with the
new pads.
WARNING! Faulty brakes can kill. If you have to
top up the brake reservoir frequently, get the brake
system checked by your JCB Dealer. Do not use the
machine until the fault has been put right.
WARNING! The park brake must not be used to
slow the machine from travelling speed, except in an
emergency, otherwise the efficiency of the brake will
be reduced. Whenever the park brake has been used
in an emergency the brake friction components must
be renewed and the other components inspected.
Notice: Over adjustment or failure to disengage the
park brake properly will cause excessive wear of the
park brake mechanism.
9. 24 - Brake System
00 - Brake System
00 - General
24 - 5 9813/5350-2 24 - 5
Technical Data
(For: 10TFT, 9TFT)
Table 124.
Description Data
Brakes
Type Oil immersed disc type
in the axles
Master cylinder diameter 31.75mm
Master cylinder seals Specific for mineral oil
Brake discs
Type Manually adjusted
'Hayes' type caliper,
mounted on transmis-
sion output shaft
Friction disc diameter 279.4mm
Friction disc minimum
thickness
8.89mm
Friction disc maximum
thickness
9.65mm
Friction material thick-
ness on new pads
(1)
3.18mm
Torque values
Master cylinder retaining
bolts
60N·m
Park brake caliper bolt 230N·m
Park brake caliper
bracket bolt
45N·m
(1) Replace at 2mm
10. 24 - Brake System
00 - Brake System
00 - General
24 - 6 9813/5350-2 24 - 6
Component Identification
(For: 10TFT, 9TFT)
Figure 310.
C
B
A
D
E
F
A Front axle B Front axle brake bleed nipple
C Remote brake fluid tank D Master cylinder
E Rear axle brake bleed nipple F Rear axle
11. 24 - Brake System
00 - Brake System
00 - General
24 - 7 9813/5350-2 24 - 7
Fault-Finding
Fault
Insufficient braking Table 125. Page 24-7
Brake pedal is soft Table 126. Page 24-7
Overheating of the brake system Table 127. Page 24-7
Table 125. Insufficient braking
Cause Remedy
Incorrect adjustment Check the brake disc thickness. Adjust the brakes.
Worn out brake disc Check the brake disc thickness. Replace the brake
discs.
Incorrect brake fluid Drain the incorrect brake fluid. Replace all the seals
and hoses from the brake system. Fill the correct oil.
Loss of brake fluid Check the outside circuit and the master cylinder
for leaks. Repair as necessary. If the leak is to the
outside, replace the O-rings between the center and
the intermediate housings. If the leak is to the inside,
replace the all the O-rings.
Overheated axle causing brake fluid to vaporize Refer to overheating fault remedy.
See Also: Table 127. Overheating of the brake
system
Table 126. Brake pedal is soft
Cause Remedy
Air in the brake system Bleed the brake system.
Table 127. Overheating of the brake system
Cause Remedy
Wrong oil level Drain, flush and fill the brake oil to the correct level.
Too small brake gap Adjust the brakes.
Incorrect brake fluid in the system Drain the incorrect brake fluid. Replace all the seals
and hoses from the brake system. Fill the correct oil.
No free play of brake pedal at master cylinder Adjust the brake pedal free play.
Restrictions in the brake lines Check the condition of the brake lines. Replace as
necessary.
12. 24 - Brake System
00 - Brake System
00 - General
24 - 8 9813/5350-2 24 - 8
Bleed
(For: 10TFT, 9TFT)
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03-00.
3. Open the engine compartment cover.
Refer to: PIL 06-06-06.
4. Open the bleed nipple.
Figure 311. Front axle
A
A
A Bleed nipples
5. Press and hold the brake pedal down.
6. Tighten the bleed nipple.
7. Release the brake pedal.
8. Do the steps 4 to step 7 until all of the trapped air
is removed from the brake system.
9. Do the steps 4 to step 8 for the RH (Right Hand)
side brake.
10. Do the steps 4 to step 9 to bleed the rear brake
system.
Figure 312. Rear axle
A
A
A Bleed nipples
13. 24 - Brake System
03 - Service Brake
01 - Master Cylinder
24 - 12 9813/5350-2 24 - 12
Remove and Install
(For: 10TFT, 9TFT)
Remove
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03-00.
3. Remove the floorplate.
Refer to: PIL 09-78-00.
4. Disconnect the front brake pipe, rear brake pipe
and the brake fluid tank from the master cylinder.
Figure 313.
C
D
A
C
B
A Front brake pipe
B Rear brake pipe
C Brake fluid tank
D Master cylinder
5. Remove the bolts.
6. Remove the master cylinder from the machine.
Figure 314.
E
D
D Master cylinder
E Bolts
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
step.
2. Tighten the bolts to the correct torque value.
Table 128. Torque Values
Item Description Nm
E Bolts 60
14. 24 - Brake System
18 - Park Brake
06 - Cable
24 - 15 9813/5350-2 24 - 15
06 - Cable
Adjust ............................................................ 24-15
Remove and Install ....................................... 24-16
Adjust
(For: 10TFT, 9TFT)
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Remove the floorplate.
Refer to: PIL 09-78-00.
3. Isolate the battery.
Refer to: PIL 33-03-00.
4. Remove the plastic hand grip from the park brake
lever.
Figure 315.
A
A Plastic hand grip
5. Loosen the locking grub screw.
6. Rotate the adjusting nut in an anticlockwise
direction to give free play in the cable.
Figure 316.
B
C
B Grub screw
C Adjusting nut
7. Adjust the cable so that the specified length of
thread protrudes through the locknut.
Dimension: 5mm
8. Tighten the nut against the back of the bracket.
15. 24 - Brake System
18 - Park Brake
06 - Cable
24 - 16 9813/5350-2 24 - 16
Figure 317.
D
F
E
D Park brake cable
E Locknut
F Nut
9. Rotate the adjusting nut on the park brake lever
in a clockwise direction until the free play in the
cable has been taken up. Correct adjustment is
achieved when there is no free play in the cable
and no pressure on the brake lever.
10. Tighten the locking grub screw.
11. Install the plastic hand grip to the park brake
lever.
Remove and Install
(For: 10TFT, 9TFT)
Remove
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03-00.
3. Remove the floorplate.
Refer to: PIL 09-78-00.
4. Release the park brake.
5. Disconnect the park brake cable from the caliper.
Figure 318.
A
A Park brake cable
6. Disconnect the park brake cable from the
reaction bracket.
Figure 319.
B
A
A Park brake cable
B Reaction bracket
7. Remove the split pin.
8. Disconnect the park brake cable from the park
brake handle.
16. 24 - Brake System
18 - Park Brake
06 - Cable
24 - 17 9813/5350-2 24 - 17
Figure 320.
H
J
H Split pin
J Park brake handle
9. Loosen the locknut.
10. Disconnect the park brake cable from the
bracket.
Figure 321.
K
L
K Locknut
L Bracket
11. Make a note of the route and the position of the
cable to help installation.
12. Remove the park brake cable from the chassis.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
step.
2. Adjust the park brake cable.
Refer to: PIL 24-18-06.
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. 24 - Brake System
18 - Park Brake
18 - Caliper
24 - 18 9813/5350-2 24 - 18
18 - Caliper
Remove and Install
(For: 10TFT, 9TFT)
Remove
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03-00.
3. Remove the floorplate.
Refer to: PIL 09-78-00.
4. Release the park brake.
5. Disconnect the park brake cable from the caliper.
Figure 322.
A
A Park brake cable
6. Disconnect the park brake cable from the
reaction bracket.
Figure 323.
B
A
A Park brake cable
B Reaction bracket
7. Remove the bolts.
8. Remove the park brake caliper from the machine.
Figure 324.
D
C
C Park brake caliper
D Bolts
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
1.1. Tighten the bolts to the correct torque value.
1.2. Adjust the park brake cable. Refer to (PIL
24-18).
Table 129. Torque Values
Item Description Nm
D Bolts 230
19. 25 - Steering System
06 - Steer Unit/Valve
00 - General
25 - 8 9813/5350-2 25 - 8
Check (Condition)
Consumables
Description Part No. Size
Surface Cleaning Fluid 4103/1204 1L
1. Examine all contact surfaces and replace any
parts that have scratches, wear or other damage
that could cause leakage.
2. Do not use abrasive or try to file or grind the
surfaces.
3. Clean all metal parts with a solvent and blow dry
with an air line.
Consumable: Surface Cleaning Fluid
Remove and Install
(For: 10TFT, 9TFT)
Remove
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03.
3. Remove the floor plate.
Refer to: PIL 09-78-00.
4. Remove the bolts 1.
5. Remove the steering column cover.
Refer to: PIL 25-12-06.
6. Remove the cable ties.
Figure 325.
A
A Cable ties
7. Disconnect the hoses from the steer unit.
8. Put a label on the hoses to help installation.
9. Plug all the open ports and hoses to prevent
contamination.
20. 25 - Steering System
06 - Steer Unit/Valve
00 - General
25 - 9 9813/5350-2 25 - 9
Figure 326.
B
B Hoses
10. Remove the grease nipple.
11. Remove the bolts 2.
12. Disconnect the steer valve from the steering
column.
Figure 327.
J
K
L
J Grease nipple
K Steer valve
L Bolts 2
13. Rotate the steer valve anti-clockwise and remove
the steer valve from the machine.
Figure 328.
K
K Steer valve
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Align the steering column splines to the steer
unit.
3. Tighten the bolts to the correct torque value.
4. Check the hydraulic oil level and top up as
required.
Refer to: PIL 30-00-00.
Table 131. Torque Values
Item Description Nm
L Bolts 2 60