2. CENTRIFUGAL BLOWER
Automated systems have provided much convenience,
and also reduction in time and cost for industry people.
One of such well-organized technology is Centrifugal
blower technology. It is used for generating significant
amount of air, using the partial space for nominal
vibration. It works by consuming air, via its centre, and
directs this air, through a specific opening. It also uses
impeller, a vane disk, having its application, in increasing
pressure, and for movingthe gases.
3 MARCH 2021
4. VERY NECESSARY TO CHOOSE THE RIGHT
CENTRIFUGAL BLOWER,
• Multistage Centrifugal Blower: It works by being tied
together, with induction motor driveshaft, which results
in,it’s lowered speed of operating.But, you can anytime
increase the flow, by just increasing the impeller diameter,
and also can increase the pressure, by increasing the
quantity of impellers.
• Integrally Geared Turbo Blower: Here, induction motor is
used, for compelling this blower, by using gearbox, for
increasing the speed.You can control the air flow and
pressure here, by using inlet guide vanes, and variable
diffuser vanes.
3 MARCH 2021
5. CENTRIFUGAL BLOWER
• High speed turbo Blower: It involves :
• Air foil bearing high speed turbo blowers:These are widely
used since many years and are reliable.
• Magnetic bearing: These are in use, more before the
usage of air foil bearings. And, are more reliable than air
foil bearings, as these helps in preventing catastrophic
failures.
3 MARCH 2021
These both allows impellers, to rotate at 60,000RPM, for increasing the required air
flow and pressure, by using speed permanent magnet motors.
7. MAILING ADDRESS
7, Giriraj Industrial Area, Opp Screenotex Engineering Pvt.
Ltd., Paldi-Kankaj, Old Ahmedabad-Bhavnagar Highway,
Daskroi,Ahmedabad – 382425, Gujarat, India.
EMAIL ADDRESS
info@trimechindia.com
PHONE NUMBER
+91-79-25840557
Contact Us
WE WOULD LOVE TO
HEAR FROM YOU!