A fairly broad category in the fiber optics sector, the fiber tool kit contains instruments for doing many different tasks. There are kits available for a variety of tasks, including rapid connection termination, mechanical splicing, and fusion splicing, cleaning optics, and testing fiber optics.
2. Fiber Transceiver
SFP Transceiver Module
The SFP transceiver supports dual data-rate of
1.25Gbps/10.625Gbps and up to 180km
transmission distance with single-mode fiber or
550m with multi-mode fiber. The transceiver
consists of two sections: The transmitter section
incorporates a FP or DFB laser.
The SFP transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and up to 120km
transmission distance with single-mode fiber or 550m with multi-mode fiber.
The transceiver consists of two sections: The transmitter section incorporates a FP or DFB laser.
the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier
(TIA).
All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL
logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of
signal (LOS) output indicates the loss of an input optical signal of receiver.
3. EDFA Optic Amplifier
High Power Optical Amplifier
The SFP transceiver supports dual data-rate of
1.25Gbps/10.625Gbps and up to 180km
transmission distance with single-mode fiber or
550m with multi-mode fiber. The transceiver
consists of two sections: The transmitter section
incorporates a FP or DFB laser.
4. Fiber Patchcord Line
AFCM-2000 Automatic Fiber Cable Cutting
Machine
Automatic Opical Fiber Cable Cutting Machine
is applied for producing fiber patchcord, and it
is a professional equipment with measuring
length / cutting and winding fuctions. It could
cut different indoor optical fibers into required
length and wind cable into circularity.
5. Optical Power Meter
ST-3216 New Optic Power Meter
ST-3216 Handheld Optical Power Meter is a
newly designed fiber optic tester, which aims at
the installation, engineering acceptance and
maintenance of fiber network. Compared with
other usual power meters, the ST-3216 has more
functions.
ST-3216 Handheld Optical Power Meter is a newly designed fiber optic tester, which aims at the
installation, engineering acceptance and maintenance of fiber network.
Compared with other usual power meters, the ST-3216 has more functions, like automatic
wavelength identification, auto wavelength switching, intelligent backlight, data savage via USB
port.
Combined with ST-3116 handheld optical light source, it offers a quick and accurate testing
solution on both SM and MM fibers.