Water and waste water treatment solutions

Shanghai Guanghui Environmental Technology Co., Ltd
Room 5A, No.58 Xiangcheng Road, Pudong New District,
Shanghai, China Mobile：0086- 13816038604

Sea Water Desalination
High water cost and complicated process
Hard to popularize, commercialize,
Drinking Water
Secondary pollution of pipelines, lack of safety and health
The whole house has a high price of clean water and frequent
replacement of consumables
Mine Wastewater Reuse
Hard emission standard
Implemented technology, large investment, high cost
Industrial Wastewater
Hard emission standard
Traditional technology, difficult to meet standards
Water Market / High Cost and Low Efficiency

History of Ceramic Membrane
Ceramic Membrane History
Starting from the 1860 filter column, various fixed membrane treatment
technologies have been introduced.
Since the early 1990s, MF/UF ceramic membrane products have been used
in industrial fluids and water treatment. Early ceramic membranes used a
tubular or plate structure with a membrane surface area significantly lower
than that of organic membranes. Due to the high cost, the application of
ceramic membranes is limited to challenging areas. In recent years, ceramic
membranes with high specific surface area have been introduced, but the
cost is still 4-5 times that of organic membranes.
Advantages of Guanghui Flat Ceramic Membrane Low costShanghai
Guanghui's unique structure of flat ceramic membrane has the recognized
superior performance of ceramic membrane. The biggest advantage lies in
the low production cost. The investment cost of the same membrane flux is
lower than the investment cost of the current organic membrane. And the
service life is greatly improved.
Today, with energy shortages, shortage of resources, and deteriorating
ecological environment, the industry and the scientific and technological
community regard membrane technology as an extremely important new
technology in the 21st century.
Recognized performance advantages of
ceramic membranes:
3-5 times higher flux
High physical tolerance
High chemical tolerance
More stable water quality
High recovery
Longer service life
Easy maintenance / low labor costs
Today, with energy shortages, shortage of resources, and deteriorating ecological
environment, the industry and the scientific and technological community regard
membrane technology as an extremely important new technology in the 21st
century.

Type
1st generation
Organic membrane PVDF
2nd generation
Tubular ceramic
membrane
3rd Generation
Flat ceramic membrane
Product
Stability ++ ++ +++
Life Span
+
1-3 years
++
3-8 years
+++
5-10 years
Operation Cost
++
Medium
++
High
+++
Low
Maintenance
+++
Frequent Cleaning
++
Cannot Backwash
+
Backwash
The Inevitable Trend of The Membrane

UF filter
3rd Generation
NF filter
4th Generation
AF filter
5th Generation
Type
Cost
Guanghui Flat Ceramic Membrane (16 Patents +)
Technical Advantage To Lead The Future
Mature mass production Mature mass production conversion Research pilot stage (exclusive
technology)
Minimal Filtrate
Filter Reservations
Application
Bacterial virus
All organic pollutants (VOC)
All inorganic ions, including minerals
Bacterial virus
All organic pollutants (VOC)
heavy metal ion
Scale
Different color odor
Partial bacterial virus
Partial VOC (macromolecule)
Colloid
Bacterial virus
Partial organic VOC (small molecule)
Inorganic salt
Partial minerals
water molecule Water Molecule
Filtration Accuracy
Municipal and rural domestic sewage
Chemical, electronics and electroplating wastewater
Industrial wastewater from textile and paper industries
Petrochemical industry, oil and water separation
Advanced treatment of the water purification industry
Pharmaceutical industry
Surface water in addition to organic matter
Natural medicine separation and concentration
Dye purification, concentration, desalting
Brackish water, desalination
High salt wastewater
Calcium, magnesium, bacteria in chemical wastewater
Removal of metal ions and radioactive materials
Stage
10-200nm 0.5～3 nm 0.4 nm

Ceramic Membrane
Raw material formula
technology
(independent intellectual
property rights)
AF membrane
synthesis
UF, NF membrane
synthesis and
membrane
modules
Ceramic Membrane
Base frame
manufacturing
东北炼化化工
华建集团
ARCPLUS
Equipment
Leasing
BOT Investment
Construction
Operating
transfer
Managed
operation
Consulting
training
Equipment
manufacturing
Strategic
cooperation
Business Model
Technical process
package
(Strategic Partners)
industry
equipment
Membrane and membrane module
Cooperation
Mode
Products and
Equipment
Company ValueProduct and Equipment Manufacturing
Technology
Manufacture
Products

Guanghui's Product Range:
Membranes, Components and Equipment
G u a n g h u i f l a t c e r a m i c
M e m b r a n e m e m b r a n e
m e m b r a n e m o d u l e
M e m b r a n e - t h e c o r e o f
C o n t a i n e r i z e d i n d u s t r y
a p p l i c a t i o n & p r o d u c t s
Ceramic membrane effective
area: 0.9 square meters / piece
Size: W460*H1064*T9mm

Product:
Guanghui Flat Ceramic Membrane Module Technical Parameters
Diaphragm model: QL-MZYJ-0.9
Number of diaphragms: 20 pieces
Module model: QL-JCMZ-18
Filtration method: external pressure suction
Frame material: SUS304
Module size: 1240*525.5*468
Weight: 178Kg
Outlet specification: 1" flange
Effective area: 18m2
Tap water flux: 1.5m3/h
Backwash flow: more than 2 times the total
flow
Particle interception capability: 0.2μm
particle interception rate of 99% or more
Use PH range: 2-12
Upper temperature limit: 100 ° C
Module size: 1240*925.5*468
Weight: 348Kg
Tap water flux: 3m3/h
flow
Use PH range: 2-12
Module size: 1240*1725.5*468
Weight: 648Kg
Tap water flux: 6m3/h
flow
Use PH range: 2-12

Products:
Guanghui Flat Ceramic Membrane Stacking Unit Aeration Tank
/ Technical Parameters
Corresponding to membrane modules
model— QL-JCMZ-18
Aeration tank model — QL-BOQ-18
Number of aeration tanks — 6
Aeration tank interface — 1” hose
connector
Aeration tank size — 1076*490*220
Weight — 25Kg
Aeration tank material - SUS304
Aeration pressure — 3KPa+
model — QL-JCMZ-36
Number of aeration tanks - 9
connector
Weight — 36Kg
model — QL-JCMZ-72
Number of aeration tanks — 15
connector
Weight — 52Kg

Products: Guanghui Flat Ceramic Membrane Stacks
/ Series Product Introduction and Features
Membrane unit
Membrane unit
Membrane unit
Aerators
• Outstanding chemical stability and strong corrosion resistance
• Good rigidity and mechanical strength, large flux
• High filtration accuracy reduces pretreatment process
Excellent physical performance
Less land occupation
• Modular design, easy to install and operatethe equipment; Low
backwash frequency, air washable, washable
• Aeration at the bottom, forming a shear force on the surface of the
membrane, effectively preventing contamination
Easy maintenance
• High flux, external pressure internal suction pressure 0.02MPa
• The membrane is hydrophilic and reduces the transmembrane
pressure difference
• Good membrane regeneration performance, no secondary pollution
Energy saving and long service life
M12 & M6 bolts
Lifing ring
Pipes and accessories
The stack of membrane units can not exceed 4 layers, and the aerators and membrane unit
should be selected according to needs. Bolt connection between membrane units, lifting rings
on the uppermost layer, easy for movement and transportation. Adopt different pipe fittings for
different membrane units. The recommended flow rate is ≤1.2m/s.
• Less pretreatment process
• Large flux, reducing water retention time
• Integrated system immersion

Products: Guanghui Flat Ceramic Membrane Stacks /Membrane unit
Model No. of
Membrane
unit
Effectiv
e area
Sewage flux Outlet Aeration Aeration
volume /min
unit
Size Weight
QL-18-MZ-18 1 18㎡ 0.75m³/h 3/4” 1” 0.27m³ 1076*770*688 225Kg
QL-18-MZ-36 2 36㎡ 1.5m³/h 3/4” 1” 0.27m³ 1076*770*1156 385Kg
QL-18-MZ-54 3 54㎡ 2.25m³/h 1+1/4” 0.75” 0.27m³ 1076*770*1624 565Kg
Model No. of
membrane units
Effectiv
e area
volume/min
unit
Size Weight
QL-36-MZ-36 1 36㎡ 1.5m³/h 1” 1” 0.54m³ 1076*1000*688 385Kg
QL-36-MZ-72 2 72㎡ 3m³/h 1+1/2” 1” 0.54m³ 1076*1000*1156 735Kg
QL-36-MZ-108 3 108㎡ 4.5m³/h 2” 1” 0.54m³ 1076*1000*1624 1080Kg
Model No. of
Membrane
unit
Effective
area
volume /min
unit
Size Weight
QL-72-MZ-72 1 72㎡ 3m³/h 1+1/2” 1+1/4” 1.08m³ 2410*1076*688 705Kg
QL-72-MZ-144 2 144㎡ 6m³/h 2+1/2” 1+1/4” 1.08m³ 2410*1076*1156 1355Kg
QL-72-MZ-216 3 216㎡ 9m³/h 3” 1+1/4” 1.08m³ 2410*1076*1624 2000Kg
QL-JCMZ-18 QL-BQX-18

G u a n g h u i U F M e m b r a n e G r o u p
I t e m M o d e l N a m e
E f f e c t i v e
A r e a
（㎡）
F r a m e S i z e
（ m m ）
F r a m e W e i g h t
（ K g ）
M e m b r a n e
G r o u p
（ K g ）
R e m a r k s
1
QL-JCMZ-18 18㎡ basic unit 18 1240*525.5*468 39 176
Note: This quotation does not
include PVC piping and
accessories.
A e r a t i o n S y s t e m
I t e m M o d e l N a m e
N o . o f
A e r a t i o n
F l a n g e
（ u n i t ）
F r a m e S i z e
（ m m ）
F r a m e W e i g h t
（ K g ）
A e r a t i o n
W e i g h t
（ K g ）
R e m a r k s
1
QL-BQX-18 18㎡ Aerator 6 1076*490*220 15 24.5
Note: This quotation does not
include PVC piping and
accessories.
QL-BQX-36 36㎡ Aerator 9 1076*890*220 17 32
QL-BQX-72 72㎡ Aerator 15 1076*1690*220 21 43
2018 Guanghui Flat Ceramic Membrane UF series

Products: Guanghui Flat Ceramic Membrane/ Test Prototype
P r o t o t y p e Ⅰ P r o t o t y p e ⅢP r o t o t y p e Ⅱ
Model — QL-MZ-SY-03
Effective Area — 3M2
Sewage Flux — 0.125M3/h
Aeration Flange — 2
Joint of Aeration Flange — 1”rubber hose
Outlet — 1”socket connection
Dimesion — 585*348*635mm
Weight — 38.5Kg
Raw materails — SUS304
Aeration Volume — 0.13m³/min unit
Pressure — 3KPa+
Model — QL-MZ-SY-01
Effective Area — 1M2
Sewage flux — 0.042M3/h
Dimension — 520*372*1030mm
Weight — 45Kg
Raw Materials — PMMA+Carbon steel + anti-
corrosion
Aeration volume — 0.1m³/min unit
◆ The compact designed prototype has a suction
pump, an aeration fan, a flow meter, and a
pressure gauge. It can be used as a small test and
display equipment.
Model — QL-MZ-GY-01
Effective Area — 1.5M2
Swwage flux — 0.042M3/h
Dimension — 1000*500*470mm
Weight — 57Kg
Raw Materials — PMMA
Aeration volume — 0.1m³/min unit
◆ The prototype is composed of an anaerobic pool , aerobic
pool , membrane pool and a clear water tank.
◆ It has a suction pump, an aeration fan, a flow meter, a UV
lamp, a pressure gauge. It's a compact designed device,
can be used as a small test and display equipment.

INTELLIGENTIZE
Remote monitoring water quality
intelligent and stable automatic operation,
no manual operation
Internet + big data guarantees effluent
quality
Modular Designed Seawater (Brackish Wwater) Desalination
Equipment/Convenient, Lower Processing Costs
Coagul
ation
Sand
Filter
Carbon
Filter
Cartridge
Filte UF RO
Traditional
Seawater Desalination Plant Modular Designed Seawater-Brackish Water
Desalination Equipment C-AIO-SW series
Guanghui UF
Membrane
R O
Applications:
⚫ Ship, yacht water supply
⚫ Coastal residents drinking water
⚫ Island development and
construction water
⚫ Offshore platform operation
water supply
⚫ Island tourist resort water supply
⚫ Inter-island emergency, disaster
relief water supply
Double Flat Ceramic Membrane
Modular designed
Clean water meets WHO drinking water
standards
● One-button start, fully automatic
operation, high efficiency
● Integrated supply, reducing
infrastructure investment
● Highly integrated, small footprint,
flexible and convenient

Product Series
Standard Type Reinforced Type
Stable Type Balanced Type Energy saving Type Stable
Type
Balanced Type Energy saving
Type
Engery Recovery Form NO Turbine Isobaric NO Turbine Isobaric
Brand SUNUP ERI/FEDCO ERI
Brands of other key components Chinese famous brands Internatioal famous brands
Control System Automatic（button） Automatic （Touch screen）
Pipe
Low Pressure UPVC/PP
High Pressure stainless steel 316 Dual-phase Steel 2205/2507
Pump
Low Pressure stainless steel 316/Dual-phase Steel 2205 Dual-phase Steel 2205/2507
High Pressure Dual-phase Steel 2205/2507
Membrane Unit SWRO Membrane
Membrane
shell
C-AIO-SW series 1000psi FRP8040
C-AIO-SWE series 1200psi FRP8040
Meter &Gauage pH meter / conductivity meter / pressure transmitter / pressure switch / online flow meter
Product：Guanghui Modular Designed Seawater
(Brackish Water) Desalination Equipment

Modular Designed Seawater (brackish water) Desalination
Equipment / C-AIO-SW series
Operation Conditions Performance
◆ Water Source：---------------------------sea water
◆ Water Temperature：--------------------15～35℃
◆ Salts inside influent water：------25000～45000mg/L
◆ Ambient Temperature：---------------5～40℃
◆ Highest Altitude：--------------------------1000M
◆ Highest Permeate throttling：--------------1.5bar
◆ Power Supply：------------------------TN-C-S
◆ Control Voltage：--------220VAC/24VDS
◆ Power Voltage：------------380～400VAC(±10%)50Hz
◆ Water Supply：-----------------------5～50M3/h
◆ Production Capacity：--------------2.1～21M3/h
◆ Recovery Rate：-----------------------35～45%
◆ Salts Content(2)： ---------------------------≤500mg/l
◆ Max. operation pressure：--C-AIO-SW(SWE) series
60（80）bar
Note:
This indicator is superior to the requirements of China
"Standards for Drinking Water Hygiene GB5749-2006" and the
World Health Organization "Drinking Water Quality Standards".
Note :
The parameters listed above are general requirements. If you
need to operate the equipment under other conditions, please
contact us.

2018 C-AIL-SW SERIES Seawater (Brackish Water)
Desalination Equipment
Notes:
1. Inlet water salt content <35000PPM, effluent salt content <600PPM; one year warranty, lifetime maintenance for free; 2. The material of high pressure pump is 2205; 3. The agent
can send staffs to get training for installation and commissioning at our company; 4. The end user or agent shall pay for all expenses related to the exit, travel, accommodation,
subsidies, etc. of the installation and commissioning personnel going abroad.
Model C-AIO-SW-M3 C-AIO-SW-M5 C-AIO-SW-M50 C-AIO-SW-M200 C-AIO-SW-M500
Perf
orm
ance
ton/day 3 5 50 200 500
Dimension（M） 0.6*0.6*1.5 0.6*0.6*1.5 2.5*1.5*2.8 6*2.2*2.8 12*2.2*2.8
Weight（T） 0.13 0.15 1.5 4.5 8
Power Consumption/ton
（kw/h）
18 15 7 4 4
For how many people 8～12 people 10～20 people 100～200 people 400～800 people 1000～2000 people
Remarks
With pretreatment,
Skid-mounted, high-
pressure pump from SOUTH,
imported membrane.
No energy recovery
With pretreatment
Cabinet type, high
pressure pump from
SOUTH, imported
membrane. No energy
recovery
With pretreatment,
Skid-mounted, high-
pressure pump from
SOUTH, imported
membrane.
No energy recovery
With pretreatment
Container type,
imported high pressure
pump & membrane.
FEDCO energy recovery
With pretreatment
Container type,
imported high
pressure pump &
membrane. FEDCO
energy recovery

Intelligent automation
Remote monitoring of water quality
The equipment is intelligent and stable,
no manual operation is required.
Internet + big data guarantees stable
water quality
Mine Wastewater Processing Modulation Euipment
Application areas:
* Coal mine underground fault
water, mine water
* Waste stone field leaching
treatment
* Copper ore, gold ore and other
ore dressing wastewater
* Water reuse in mines
Flat Ceramics Membrane
Method Processing
Simplifies the craft, guarantees the water
leakage standard
● The effluent fully meets the national
water reuse standard
● One-button start, fully automatic
● Integrated supply, reducing infrastructure
investment
● Highly integrated, small footprint, flexible
and convenient
Mine Wastewater Processing Modulation Equipment/Transportable,
Low Investment and Low Operation Cost
矿井废水泄漏现场
Brazilian southeastern two mining dam
divulging, pollution of the environment
500 minutes of tributary and
arsenic to water from Jinwang
Mine. The cleanup may take up
to ten years and has cost the US
Environmental Protection
Agency $29 million.

Deals With The Waste Water Issue By Us, So That
The Customer Can Concentrate On The Mining Service
G u a n g h u i
E n v i r o n m e n t
The golden extraction process needs massive water, because has the pollution water (cyanide,
sulfate) the dangerous chemical, this will also cause the production of acidic mine pit draining
water, therefore needs "to contain" or purifies this type of water. The waste water of mine by heavy
metal and cyanide or sulfate and other chemical substance pollution. All these pollutant need to
process thoroughly, in order to avoid harm environment. (Special equipment needs custom-made)
Exposure to the Hunan gold mine is highly toxic,
and the smell of sulfur on the spot is disgusting.

Mine Wastewater Treatment Modular Equipment / Coal Mining
Industry - Mine Water Treatment Process
Mine water is the most discharged wastewater in the coal mining
process. It is the water infiltrated into the ground by the aquifer. It is
formed by a series of physical, chemical and biological reactions
between the mine water and the coal rock formation.
When the mine water flows through the coal mining face, it will
bring in a large amount of suspended solids such as pulverized coal
and rock particles. The suspended solids content of the mine water
containing suspended solids is much higher than that of surface
water, and the sensory properties are poor; The particle size is small,
the specific gravity is light, the sedimentation speed is slow, and the
coagulation effect is poor;
The mine water also contains organic pollutants such as waste
engine oil and emulsified oil. The total water content in the mine
water is much higher than that of normal surface water, and a large
part is sulfate ion. Mine water tends to have a particularly low pH
value, often accompanied by a large amount of ferrous ions, which
increases the difficulty of handling.
Mine water
Clear CUF
RO
Disinfection
Downhole
water
treatment Fire sprinkler
hydraulic
water
Drinking water
Advantages of the CUF process:
1. For the underground water treatment, it has the characteristics of small footprint
and large amount of treated water.
Water quality for hydraulic, spray and fire fighting.
2. The CUF process has high degree of automation, simple and convenient
maintenance, and reduced labor intensity.
3. CUF high hardness, acid and alkali resistance, can be backwashed and acid and
alkali cleaning, long service life.
4. CUF filtration accuracy is high, can extend the life of RO.
F l a t C e r a m i c M e m b r a n e ( C U F )
T r e a t m e n t P r o c e s s
Introduction To Coal Mine Water

Coal Mine Water Standard
The water quality of the prepared hydraulic fluid meets the requirements of MT76-2002
The quality of underground fire and sprinkler water meets the requirements of GB50383-2006
Item exterior SS PH Cl SO₄²¯
Stand Colorless and
tasteless
Does not have the naked
eye obvious thing
6-9 200mg/l 400mg/l
Item SS PH Median particle size E.coli
Stand 400mg/l 6-9 0.3 mm 3pcs/l
The mine water discharged from coal mines in the country is about 2.2 billion m3 per year, and the displacement of tons
of coal in most mines is about 2~4 m3.
Note: Since October 1, 2007, the discharge of water pollutants from the coal industry is in accordance with the “polluting emissions from the coal industry”.
(GB 20426-2006) implementation. This standard specifies the limits for the discharge of raw coal and coal-selecting water pollutants.

wastewater is a general term for natural leaching water, beneficiation wastewater, overflow
water from beneficiation waste slag, and leaching water from slag dumping sites.
Definition of Mining Wastewater
Source of Mining Water
Mine
water
Atmosphere
precipitation
Surface
water
Watery
Layer water
Fault
water
Gob area
water
The fault fracture zone is the channel and collection zone of groundwater.
The fault zone along the fault can communicate with each aquifer and
generate hydraulic connection with surface water to form fault water.
The groundwater formed by the pre-production
production and the abandoned roadway, due to the long-
term stoppage of drainage.
Wastewater
source:
Definition And Source Of Mine Wastewater

Source Analysis Of Mine Wastewater
1. Waste Stone Field Leaching Water
According to statistics in 2005, the annual emission
of coal gangue in China can reach 150 million tons,
the utilization rate is 43%, and the accumulated
coal gangue is 2 billion tons over the years. A large
amount of coal gangue is deposited into coal
gangue.
The pyrite in coal gangue undergoes long-term
leaching of weathering and atmospheric
precipitation, and the formed sulphuric acid or
acidic water disintegrates toxic and harmful
elements such as cadmium, mercury, lead, and
arsenic into the ground.
Solid wastes such as uranium, radium and other
wastes and tailings are produced in the mining and
smelting of uranium ore.
2. Mineral Processing Wastewater
1. Source:
(1) Drainage of wet dust removal during crushing, ground washing water in crushing and screening
workshops, tape corridors and ore transfer stations.
(2) Beneficiation wastewater. The beneficiation wastewater containing a large amount of suspended solids is
usually used for beneficiation after sedimentation, and the sediment enters the beneficiation system according
to its composition and is discharged into the tailings system.
(3) Cooling water. Cooling water from the crushing and grinding equipment cooler and vacuum pump drain.
This kind of wastewater is only high in water temperature and is often used for ore dressing after being directly
discharged or cooled.
(4) Leaching milk and chemical preparation workshop to flush wastewater from the ground and equipment
2. Characteristics
Large amount of water, high suspended matter content, and many types of harmful substances. The main
harmful substances are heavy metals and mineral processing chemicals.
3. Environmental Impact
Suspended solids block the river channel. Toxic agents make the water smell odor. Fish and shrimp reduce
odor deformation, toxic metals cause water pollution, and enrichment in fish and crops harms the human body.

Solid solution treatment
Water reuse
Washing wastewater treatment
Washing
Raw water
supplement
Separated water
Water Reuse Of Mine Wastewater

Operating Conditions Performance Parameter
◆ Water source ：--------Mine wastewater (no colloid)
◆ Water temperature ：-------------5～100 Celsius ℃
◆ Influent solid content ：------------------------35%
◆ Ambient temperature：------------5～40 Celsius ℃
◆ Highest altitude ：---------------------------1000M
◆ Negative pressure value ：-------------------0.2bar
◆ Power supply ：-----------------------------TN-C-S
◆ Control voltage ：------------------220VAC/24VDS
◆ Power voltage：---------------380VAC(±10%)50Hz
◆ Backwash volume：------------1-1.5 times the amount of water
◆ Flux ：-----------------------------------------------1.5~2M3/d.㎡
◆ Recovery rate ：----------------------------------------------95%
◆ Water production SS： ----------------------------------≤5mg/l
◆ Aeration amount ： -----------12~15L/min.m2 (projected area)
◆ Formwork material ： ------------------------------------SUS304
◆ Control mode ： -----------------------PLC automatic operation
◆ Equipment size ： ----------------20ft/40ft container (high box)
◆ Processing capacity ： ------1200m3/d (20ft), 2400m3/d (40ft)
Note (2):
This indicator is superior to urban sewage in the People's Republic of China
Treatment plant pollutant discharge standard (GB 18918-2002) level A
standard.
Note:
The parameters listed in this table are general requirements.
If you need to run under other conditions, please contact us.
Modular Mine Wastewater Treatment Equipment

QL-KS Series Mining Modular Equipment
Equipment Model QL-KS-20 QL-KS-40
Perferma
nce
Ton/Day 600-1200 1200-2000
Overall
dimension（M）
20ft HQ Container 40ft HQ Container
Weight（T） 12 26
Power（kw） 11 42
Power（kw） 7.5 23
Suitable for Solid liquid
separation in mining
Suitable for Solid liquid
separation in mining
Remarks
Including suction pumps, sludge
pumps, flowmeters, liquid level
meters, fans, air conditioners, PLC
control cabinets and valves.
Including suction pumps,
sludge pumps, flowmeters,
liquid level meters, fans, air
conditioners, PLC control
cabinets and valves.
Caption:
1.Apart from all parts of the membrane, the machine
warranty is one year, the membrane is 2 years.
2.The container selects Q235B+internal epoxy, special
customization.
3. Can offer installation, commissioning and
maintenance training and after sale services and life
time spare parts supply

Automation Intelligence
water quality
MBBR Sewage Modularization Equipment
Application：
•Domestic sewage in island tourist
resort
•Urban and scenic sewage
•Small towns and rural domestic
sewage
•Hotels, restaurants and living
quarters
Flat Ceramic Membrane Processing
Simple Processing, High Outlet
Water Qulity
●The outlet water meets Standard A of the
first class of National Urban Sewage
Discharge Standard
●One button to start, full automatic
●ALL IN ONE, less investment in
infrastructureHighly integrated
●Highly integrated, small area, flexible and
convenient
MBBR Modular Equipment for Sewage Treatment
Low Investment & Low Operating Cost
Traditional centralized sewage treatment
plant (traditional process)
Grille
sedimen
tation
pool
A2O Fiber
filter
Polymeri
zed fiber
membra
ne pool
Ozone
pool
Sterilizing
pool
Second
ary
sedime
ntation
Sludge
Sewage

2018 MBBR Wastewater Treatment Modular Equipment
Equipment Model QL-WS-20 QL-WS-40
Perfer
manc
e
T o n / D a y 45 100
Overall
Dimension（M）
20ft HQ Container 40ft HQ Container
Weight（T） 6.5 17.5
Power（kw） 12 20
Power（kw） 5.5 12
Suitable for municipal
and domestic sewage
Suitable for municipal and
domestic sewage
Remarks
meters, fans, air conditioners,
PLC control cabinets and valves.
meters, fans, air conditioners, PLC
control cabinets and valves.
Caption:
1.Apart from all parts of the membrane, the
machine warranty is one year, the membrane is 2
years.
2.The container selects Q235B+internal epoxy,
special customization.
3. Can offer installation, commissioning and
maintenance training and after sale services and
life time spare parts supply

Automation intelligence
water quality
Port Washing Wastewater Treatment Modular
Equipment and Terminal Wastewater Treatment
APPLICATION:
● Port washing wastewater
treatment
● Port domestic sewage treatment
● Small towns and rural
distributed domestic sewage
Flat Ceramic Membrane MBR Treatment
Simplify The Process and Ensure The
Water Standard
●The outlet water meets Standard A of the first
class of National Urban Sewage Discharge
Standard
●One button to start, full automatic operation,
high efficiency
●Highly integrated, small area, flexible and
convenient
Port Washing Wastewater Treatment Modular Equipment
/ Low Investment, Low Operating Costs
Port Washing Wastewater and
Other Sewage Treatment
Compliance Discharge

A u t o m a t i o n
I n t e l l i g e n c e
water quality
Central Centralized Water Purification Equipment
(Original Ecological Mineral Water)
(Meet the World Health Organization's WHO drinking water standards)
APPLICATION:
* Hospitals, schools and pensions
* New hotel and renovation project
* High-end fine decoration real estate,
villa bungalow
* Government public buildings
Nanofiltration membrane process
Lowest processing cost
Water quality safety and health
● Terminal outlet water meet national
drinking water standards
●One button to start, full automatic
●Highly integrated, small area, flexible
and convenient
Central Centralized Water Purification Equipment / Safe and Reliable
Secondary pollution refers to the pollution generated by the water source after
being
purified by the water treatment plant and then transported to various
households.
Water plant
Residents' home
Sediment, Rust Bacteria
Sediment
Rust
Sediment, rust, bacteria, virus
Sediment, Rust

Processing Water Quality Data :
Raw water
(Secondary
Nitrification
tank)
Ceramic Membrane
Filtered water
Organic
Membrane
Filtered water
Experiment of a Landfill in Guangdong
Membrane Filtered Water Comparison
(Ceramic membrane & Organic membrane )
Index Before MBR
treatment
After MBR
processing
NH4⁺-N2
(mg/L) 151 0.51
COD (mg/L) ×10³ 13.9
SS (mg/L) 6300 —

Fifth Generation of Membrane Technology Has been
Applied In A Small Range / Safe and Reliable
• Capacity： 280kg/h
• Original Water Content： 8%
• Product water content： ≤0.5%
• Ethanol yield ： ≥98%
• Steam consumption ： 60kg/h
• Power： 16kw
• Area ： 7m×2m
The Fifth Generation of AF Membranetechnology is applied - XX
Pharmaceutical Co., Ltd.
2000 ton/year Ethanol dehydration unit
• Raw material： 85% Tert-butanol
• Product： 99.5% Tert-butanol
• Tert-butanol Yield： ≥98%
• Area ： 10m×8m
• Steam consumption ： 100kg/h
• Power： 16kw
• Capacity： 3000 ton/year
The Fifth Generation of AF Membranetechnology is applied -XX Chemical company
3000 ton/year Tert-butanol dehydration unit

Shanghai Guanghui Environmental Technology Co., Ltd.(VOSTOSUN) is located in Pudong New Area,
Shanghai. The company inherits the traditional theory and opens up a new field of science and technology, and promotes the
application of Clean flat ceramic Membrane products with independent intellectual property. The core members are engaged in
the field of environmental treatment and new materials for many years. The company has established water treatment since the
company was established. Since business, with advanced technical management experience and strong technical strength, we
have the ability to provide users with ONE-STEP SERVICES including engineering consulting, design, installation, commissioning,
maintenance and after-sales service , and to undertake the operation and management of water treatmentebuggin engineering.
The company has more than 20 years of industry experience in water treatment experts, with a number of professional trained
water treatment technicians responsible for construction and other technical work. Our team will gather more talented people,
strengthen cooperation with many units across the country, and provide them with safe and efficient water treatment. Plate
ceramic membrane and system equipment.
About Guanghui
Environmental Protection
Focus On Water

THANKS
FOR YOUR
ATTENTION
Shanghai Guanghui Environmental Technology Co.，Ltd
Address: Room 5A, No.58 Xiangcheng Road, Pudong New District, Shanghai, China Mobile：0086- 13816038604
www.vostosunwater.com

Water and waste water treatment solutions

Recommended

Recommended

More Related Content

Similar to Water and waste water treatment solutions

Similar to Water and waste water treatment solutions (20)

Recently uploaded

Recently uploaded (20)

Water and waste water treatment solutions