Nowadays, people are looking for ways to enhance the aesthetic value of their homes and one of the best ways to do it is by getting a swimming pool in place. Some individuals often opt for a salt water swimming pool in place of a traditional swimming pool because of various factors. However, maintaining a salt water swimming pool is not at all an easy task & requires a lot of effort. Go through the slide to know the mistakes made by people while maintaining their salt water swimming pool.

1. What are the Common
Mistakes Made While
Maintaining Salt Water
Swimming Pools?

2. A salt water swimming pool
differs from a normal
swimming pool in certain
aspects and one of these is
maintenance.

3. When it comes to maintaining a
salt water swimming pool there
are many misconceptions held
by people.

4. This often leads to mistakes
being committed when it comes
to taking care of salt water
swimming pools.

5. Here, we will discuss the common mistakes made by
people while maintaining their salt water swimming pool.

7. A common misconception
prevalent among individuals
is that salt water swimming
pool doesn’t contain any
chlorine.

8. This is wrong because when you add salt to
the water, your salt water generator uses
this dissolved salt to create chlorine.

9. The problem arises when
people add chlorine to the
water and don’t test the free
chlorine level of their water.

10. You should test the water for free chlorine level & balance the
free chlorine level which will keep the water sanitized.

11. Keeping a Tab on the pH Levels
2022

12. The pH level of both a salt water pool
and a traditional pool will differ vastly.

13. The pH level of your salt water
swimming pool will run higher than
that of a traditional pool.

14. However, remember that pH levels higher than
7.6 can cause skin irritation and burning eyes.

15. This is why it is
recommended that you
must keep a tab on the pH
level of your salt water
swimming pool.

17. One of the common mistakes
made by most individuals
owning a salt water swimming
pool is adding too much salt.

18. Salt doesn’t evaporate & when it is
added to water it stays there and
gets continuously recirculated
through the salt water generator.

19. Adding too much salt is
going to disturb the chemical
balance of your water.

20. The salinity level of your swimming pool water can only be
brought down through rain, or splashing out, or manually.

21. Not Testing Alkalinity
2022

22. The alkalinity of the water is very
important because it helps in stabilizing
the pH of your water.

23. The alkalinity levels of your salt
water pool should be between 100
to 150 ppm.

24. However, your pH levels will increase gradually
when running the salt water generator.

25. This means that your
alkalinity will lose its
importance in the long run
and might go below 100 ppm.

26. The above-discussed factors
are some of the common
mistakes made by people
while maintaining their salt
water pools.

27. Get in touch with a
swimming pool
maintenance contractor to
help you maintain your salt
water pool.

28. For further information and detail
https://spearpoolrepair.com/
spearpoolsinc@gmail.com
818-208-4342
8335 Winnetka Ave #410
Winnetka, CA 91306