Your master bath is supposed to be your own private escape. Use these remodeling tips to design a functional and beautiful bathroom you'll enjoy for years. Read the blog post to learn more http://blog.smartdraw.com/12-remodeling-tips-for-your-master-bath-retreat/
2. Your Master Bath Retreat
Your master bath is supposed to be your own
private escape. Use these remodeling tips to
design a functional and beautiful bathroom you'll
enjoy for years.
I'll share with you the actual SmartDraw diagrams
used from the brainstorming, planning, to
execution stages of the remodel project. To get
started, my husband and I, used the same approach
we did with our guest bath remodel project. The
steps we took can be found in a previous blog post,
“3 ‘Must Have’s’ for Planning Your Bathroom
Renovation.”
This presentation is inspired by the SmartDraw Blog post entitled, “12 Remodeling Tips for Your Master Bath
Retreat.” It also refers to a previous post entitled, “3 ‘Must Have’s’ for Planning Your Bathroom Renovation.”
To view the full blog posting go to http://blog.smartdraw.com/
3. Our Original Master Bath
SmartDraw Tip: In order to have
SmartDraw automatically calculate
the area of an object, you must
first select the object. Navigate to
the Design Ribbon's Dimensions
control. In the Show Dimensions
dialogue box, navigate to the Area
Display section. Click the radio
button next to The Area of the
Shape option. Click OK. The
results will appear in the center of
the object you originally selected.
4. TIP #1: Do Your Research
SmartDraw Tip: The Symbol Libraries automatically
default to a library that is relevant to the template
you have selected. To create the diagram, select
Floor Plans - Residential in the Left Panel of the
Category Screen. Then, navigate to Bathrooms.
In the Template Preview, select from Room Outlines,
Standard Room Outlines, or Custom Floor
Plan. Simply click and drag symbols from the Library
into the Work Area.
We looked at the space and knew it was underutilized. For inspiration, we turned to a number of
resources: websites, home improvement television shows, and showrooms specializing in bathrooms and
kitchens. We gathered samples, researched the maintenance and care of different types of materials, read
tons of reviews, and conducted price comparisons.
5. TIP #2: Participation Pays Off
To off-set some of the cost, we negotiated with our contractors to allow us to take ownership of
some of the tasks.
We were responsible for the following:
Painting the room
Painting and installation of the door
Installation of base boards
Installation of door trim
Installation of towel bars, hook, and toilet paper roll holder.
Our offer to work side by side with our contractors proved to be invaluable. The crew began to
coach us, giving us pointers and advice on other DIY projects that we were tackling. At one point,
they not only helped my husband update our electrical wiring in our garage, they helped us install
dry wall as well. We "paid" them with pizza, beer, and some Filipino food on several occasions.
6. TIP #3: Use Elevation Diagrams
SmartDraw Tip: To locate the Bathroom Elevation Template navigate to the Floor Plans - Residential category, select Bathrooms.
Use the scroll bar to navigate to the Bathroom Elevations Template Preview area, select the Blank Bathroom Elevation Template
or one of the samples diagrams provided.
Once we reviewed the potential floor plan options with our lead contractor, we switched gears and relied
heavily on the use of elevation diagrams. This allowed us to re-image the space as well as communicate what
we had envisioned to our contractors with accuracy.
7. TIP #4: Use Inches, Not Feet
When discussing the details of the design, I noticed our contractors refer to measurements in inches, not feet.
At the tile showroom, the salesperson referred to 12" by 24" tiles opposed to 1' by 2' tiles. So, I converted the
elevations diagrams into inches for consistency.
SmartDraw Tip: To modify the scale of a diagram, navigate
to the Page Ribbon. In the Scale drop-down menu, select
Custom. The Set Rulers And Grids dialogue box appears. In
the Scale section, enter the appropriate values. Click OK.
8. TIP #5: Plan for the Unknown
Before "demo day" was scheduled, we were required to have all of the materials purchased and on-site.
Although we had done our research and placed orders on-time, there were unexpected delays that were
beyond our control.
We took advantage of the delayed start date by using this time to move from our master bedroom into the
guest room. This is where we would live for the duration of the project.
9. TIP #6: Diagrams Provide Direction
SmartDraw Tip: Although there is an extensive
Symbol Library, there are occasions in which you
may not find the exact symbol you need. Know
that you have the option of creating your own.
In this case, the Library did not have a symbol for
an adjustable handheld shower head. In the
diagram, I simply combined a black door handle
and a light fixture turned vertically. To create the
actual symbol, I placed the two symbols in the
appropriate position by using the rotation control.
Then I navigated to the Design Ribbon and selected
Group Objects (Ctrl + G).
10. TIP #7: Be Mindful of Resale Value
I stand at a whopping 4'11," while my husband is 5'9". We could have easily tailored the master bath's
features to meet our height requirements. However, we would risk the appeal to potential buyers or future
tenants. We made the following design decisions to not only meet our current needs but for resale value as
well:
The vanity mirrored cabinets included adjustable glass shelving and were installed at an average height.
To meet my needs, I simply adjusted the shelves according to my height.
The doors of the cabinets open in opposite directions so our site lines of one another are not obstructed
when we're getting ready.
The adjustable handheld shower head was installed with it's lowest point at a comfortable height that I
could reach but the highest point for an average height person.
The two shower benches have been designed to comfortably accommodate my height, while still being
useful for an average height person.
The rain shower head and massage handheld shower head are two day spa elements that we were on our
"must have's" list.
11. TIP #8: Design for Easy Maintenance
Several design decisions were made in an effort to
lessen the amount of maintenance:
We chose not to have a shower door. Benefit: Less
glass to clean.
We had 12" x 24" shower tiles installed, opposed to
smaller tiles. Benefit: Less grout to clean.
The vanity has two undermount sinks. Benefit:
Counter tops can easily be wiped down. Debris can
be swept into the sink.
Accent tiles were installed higher than the height of
the shower head wall mount. Benefit: Accents tiles
in the shower area have little to no contact with
water, which requires minimal cleaning.
The width of the shower, places the two niches
beyond the direct spray of the two shower heads.
Benefit: Niches have little contact with water, which
requires an occasional wipe down.
12. TIP #9: Manage Moisture
You'll note that the pony wall, or half wall, is
completed by a glass wall that doesn't reach the
ceiling. This design decision was to accommodate for
the amount of steam generated by the shower.
13. TIP #10: Be Able to Move Freely
SmartDraw Tip: By design, SmartDraw is set to use
what is referred to as Snaps to ensure diagrams have
clean lines. When creating a diagram, you may want
to either position or rotate an object in a particular
way in that the system does not allow.
To bypass the default setting, select the object you
wish to rotate. Navigate to the Page Ribbon, deselect
the check box next to Use Snaps. When you rotate
the object, you'll notice that it rotates smoothly. Once
you have rotated the object, it is a best practice to
repeat the steps to return to the default settings.
The two angled benches are intentional in design. Not only are they appealing to the eye and add interest to
the space, they also provide more surface area of the floor. Thus, preventing the individual in the
shower from stubbing their toe.
14. TIP #11: Plan for Supersized Products
SmartDraw Tip: Labeling photographs or elements of a diagram can prove to be
a challenge. In order for text to standout, the background needs some contrast.
Transparency was used to create the label in the photo.
In the Home Ribbon, select a shape from the Shape drop-down menu. Drag it into
the Work Area. In the Ribbon's Fill drop-down menu select the appropriate color,
in this case, White. Navigate to the Fill drop-down menu again, then select the
appropriate value in the Transparency bar. By changing the percent of
transparency the label can still display the background while provide sufficient
contrast for the text to be easily read.
Buying items in bulk can be a great way to save money. As proud
warehouse shoppers, we designed the "His & Her" niches to
accommodate two 40 oz sized bottles of shampoo and conditioner.
Our contractors were impressed by some of the details we
incorporated into the master bath, this was definitely one of them.
The depth and width of the niches were also designed to store other
items, keeping the benches and floor clear.
15. TIP #12: Plan for Routines
and the Unexpected
SmartDraw Tip: You'll note that the light fixtures, cabinets, and faucets are
in perfect alignment. The His & Her electrical outlets align perfectly with
the bottom of the cabinets. You can easily achieve this by first selecting the
objects, with the last object you select as the "target." Navigate to the
Design Ribbon's Align control and select the appropriate option.
We placed the outlets to the right and left of
the two cabinets for several reasons: (1) they
are not openly visible, (2) they do not interfere
with the overall appearance of the vanity
especially the accent tiles, and (3) they can be
easily accessed when needed.
In addition to the vanity's two electrical
outlets, we also included one to the lower
right hand side of the toilet. We could use it
for our free standing towel warmer or if we, or
any future owners of the home, wish to
upgrade the toilet to a bidet.
As a precautionary measure, we had bullnose
trim that was made of the same materials as
our floor tile installed behind the vanity. This
design choice would help protect the walls
from potential water damage from the vanity
or shower area.
16. Our New Master Bath Retreat
We absolutely love our new master bath
retreat. Increasing our shower area to
more than 3x's the original size was one of
the best design decisions we made.
We hope these remodeling tips will help
you get started in designing the master
bath retreat of your dreams.
17. Do You Have a Story to Share?
How do you use SmartDraw?
I'd love to hear your story. I'm
always intrigued to find out how
other members of the SmartDraw
community are using it.
Send me an email at rjbitner@smartdraw.com
18. With a M.Ed. in Human Resource Development and
Organizational Behavior, RuthJoy has become a trusted
advisor and educator working with mid-market to global
organizations providing change management and user
adoption strategy services for more than 15 years. As the
Director of Learning and Organizational Development of
SmartDraw Software she continues to coach and mentor
professionals from non-profits to Fortune 500 companies.
An unashamed perfectionist and absolute “SmartDraw Addict,” she discovers
innovative ways to use diagrams in her day-to-day activities to increase
productivity and efficiency for herself as well as her clients.
About RuthJoy R. Bitner, M.Ed.
19. Leave a comment and subscribe to
http://blog.smartdraw.com/
Email support@smartdraw.com
800-768-3729 (toll-free) or 858-225-3300
Monday – Friday 6:00 am to 5:00 pm PST
Follow SmartDraw
Learn More About SmartDraw